Categories

Best Sanding Drum Mandrel Set

Dophee 100Pcs Sanding Drum 1/2(inch) 80 Grit Sand Bands Shank Rotary Tool Kit with 2Pcs Mandrels

  • Size (Sanding Drum): 12.5mm x 3.17mm. Grit (sanding drum): 80#. Mandrel size: 12.5mm x 13mm..
  • Perfect accessory to sand, shape, groove, finish soft, hard woods, fiberglass and more..
  • Great for doing body work in tight spaces, or all types of small crafts metal and wood working..
  • Good on metals, woods, plastics, ceramics, etc. Small sanding drum wheel is an efficient polishing tool of metal, with small, high efficiency, low cost..
  • Wide Application: this rotary tool sanding accessories set would meet almost all your requirements in nut-carving, metal, wood, plastic, jade, circuit board and other DIY processing..
Check Stock

Drum Sander, Sanding Drum Set 2.35mm Shank Rotary Sander, 180-5000 Grits Rotary Sander for Stone Polishing and Woodworking Set of 10 (1200 Grit)

  • Package contains: These sanding drums include 330 pcs sanding drums (80 grains, 120 grains, 240 grains) and 12 pcs sanding drum mandrels, extra gifts 2 pcs self-tightening drill chuck and 1 pc combination wrench, totally 345 pcs in 1 set.
  • Univeral drum mandrels - 12 pcs reusable drum mandrel shanks including 3 diameters(1/2.
Check Stock

D1/4\ Nail Drill Sanding Bands Sleeves Bits Dog Nail Sanding Bit with 2 Mandrel Compatible with Most Rotary Tools Bit,Grit 80,102 Pics

  • Essential accessory - 80 grit commonest and standard size sanding bands use for smoothing surface and curved edges, polishing both soft and hard materials, like home improvement, artwork and woodworks.
  • Good on metals, woods, plastics, ceramics, etc.Easy to use: just need to slide the sanding drums into the drum sander, make sure the drum has been screwed tightly, you can directly start your project..
  • Easy installation - drum mandrels with self-expanding rubber cushion, making the sanding bands close to the manderl firmly and acheiving better finishing.
  • in case the sanding band fall apart from the mandrel while using, please make sure the drum have been screwed tightly and wear closely to the sleeve.
  • Great compatibility - there are the commonest and standard size sanding drum set which are widely applied in smoothing surface and curved edges, polishing both soft and hard materials, like home improvement, artwork, woodworks and other DIY finishing and work.
  • 100 piece 80 Grit, 1/2"(6.35mm) Diameter+ 2 piece 1/4" Diameter Mandrels.1/8" shank size (Fit most Rotary Tools).
Check Stock

Merryland Drum Sander Sanding Band for Dremel 184pcs, 80# 1/2\ Sanding Sleeve 180pcs and Mandrel 4pcs Rotary Tool, Electric Power Tool Accessory DIY, RMTA184C1

  • Merryland Mini Rotary Tool Accessory 184 Pcs 80# 1/2" Small Sanding Band with Mandrel, All in a Plastic Bag..
  • 180pcs 80# 1/2" Sanding Band, 4pcs Sanding Drum Mandrel..
  • Shank diameter: 3.2 mm (1/8 inch), Adaptable for All Leading DIY Tool Brands..
  • Ideal for Manicures, Pedicures, Nut-carving, Wood, Metal, Plastic, Jade, Circuit Board and Other DIY Finishing and Working..
  • The Sanding Drum Will be Attritted More Quick on Metal Surface, Please Replace Sleeves Timely in Order to Achieving the Better Sanding Effect..
Check Stock

Dremel 687-01 52-Piece All-Purpose Rotary Tool Accessory Kit- Includes a Carving Bit, Sanding Drums, Grinding Stones, Cutting Discs, and a Storage Case , Gray

  • Ideal for cutting, sanding, polishing, grinding, engraving or carving. The Dremel 52-piece General Purpose Accessory set is the complete start-up kit you need to complete a wide range of projects.
  • Accessory set includes a reusable storage case for easy organization of the included bits.
  • Carving/Engraving accessories: 194 1/8" Carving Bit (x1).
  • Grinding/Sharpening accessories: 952 3/8" Aluminum Oxide Grinding Stone (x1), 85422 25/32" Silicon Carbide Grinding Stone (x1).
  • Cutting accessories: 426 1-1/4" Fiberglass-Reinforced Cut-Off Wheel (x1).
  • Cleaning & Polishing: 421 Polishing Compound (x1), 414 1/2" Felt Polishing Wheel (x2), 429 1" Felt Polishing Wheel (x2), 403 3/4" Bristle Brush (x1).
  • Sanding accessories: 409 15/16" Emery Cut-Off Wheel (x36), 407 1/2" Drum Sander (x1), 408 1/2" 60 Grit Sanding Band (x1), 432 1/2" 120 Grit Sanding Band (x2) Includes 401 Mandrel (x1) & 402 Mandrel (x1).
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

DCT 1/4 Inch Drive Drill Press Sanding Drum Kit - Rubber Sanding Drums (0.5-1.5 Inch) and Spindle Sander Sleeves, 20pc

  • [20 Piece Drill Press Kit]: Create holes, smooth out rough edges and cuts, polish, or contour irregular shapes into your projects with the DCT Sanding Drum and Sleeves 20 Piece Kit.
  • Package includes rubber barrel sanding drums (1/2”, 3/4”, 1”, 1-1/2”), abrasive sleeves (fine 120 grit, coarse 80 grit), and a plastic blow-molded carrying case.
  • [Fits Your Tools]: Drill sanding attachment bit features a 1-inch (2.54 cm) long steel shank that fits your 1/4-inch (.64 cm) tools.
  • Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachment.
  • [Varying Sizes]: Drill press sanding drum kit includes 4 reusable sanding barrel arbor drum sander bit attachments.
  • Drum sanding bit provides a different diameter to meet your needs: 1/2-inch, 3/4-inch, 1-inch, and 1-1/2 inch (1.27 cm, 1.9 cm, 2.54, and 3.8 cm).
  • [Replacement Sleeves]: Kit includes 4 replacement sandpaper aluminum oxide bands for each size mandrel for a total of 16 sanding bands.
  • Each size features two 80 and two 120 sandpaper grits to meet your needs.
  • Mandrels fit other brands of sandpaper up to 2.5 inches (6.4 cm) in height.
  • [Built to Last]: Constructed of rubber grain and stainless steel, the 4 round sanding drum bits are designed for woodwor....
Check Stock

Dremel Max Life 60 Git Carbide Sanding Drum, Rotary Tool Accessory - 408HP

  • Carbide coating provides added durability to the surface of the drum and will not tear loose like other ordinary sanding bands..
  • Functions as both a sanding drum and a hole saw capable of plunge cutting into a variety of materials..
  • Ideal for a variety of materials including ceramic wall tile, hard & soft woods, composites, fiberglass, Masonite boards, rigid foam, gourds and more..
  • Mounted on an extra strong, steel mandrel the sanding drum allows users to move laterally or orbitally to smooth out surfaces, enlarge holes, or create irregular cavities..
Check Stock

TEMO 100 pc 1/2 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools

  • 100 PC 1/2" (12.7mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
  • 100 piece 1/2" (12.7mm) 60 Grit, 1/2" (12.7mm) Diameter.
  • 2 piece 1/2" (12.7mm) X 1/2" (12.7mm) Rubber Mandrels.
  • 1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
  • Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
  • 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

TEMO 100 pc 1/4 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools

  • 100 PC 1/4" (6.35mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
  • 100 piece 1/4" (6.35mm) 60 Grit, 1/4" (6.35mm) Diameter.
  • 2 piece 1/4" (6.35mm) X 1/2" (12.7mm) Rubber Mandrels.
  • 1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
  • Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
  • 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Alpha Paw Nail Trimmer for Pets, Heavy Duty Electric Dog Nail Grinder for Small, Medium, and Large Breed Dogs, and Cats - Painless Pet Dog Nail Trimmers - Quiet Dog Nail Clipper - USB Rechargeable

  • Dog nail grinder replacement kit: there are 10 pieces of 60 grit sanding bands for the electric grinder, 10 pieces of 100 grit sanding bands for the electric grinder, and 2 pieces of black grinding drums.
  • The outer diameter of all these pet nail grinder replacement kits is about 0.5 inches.
  • Features: 2 models of sanding bands include the medium-sized bands (60 grit) and the fine bands (100 grit).
  • Through the fast sharpening, your dogs and cats will leave smooth pet nails, keeping pet nails neat and clean.
  • Safe and convenient to use: the dog nail grinder provides your dog with a safe and less stressful alternative to using pet nail trimmers, which is a nice pet supply for dog nail trimming and grooming.
  • Easy way to use: you can adjust the screw on the top of the mandrel and loosen the grinding drum.
  • Then you need to make sure that the grinding drum is firmly fixed on the mandrel before using.
  • Next, you can slide the grinding wheel into the drum sander, and tighten the drum.
  • Finally, you can directly start to groom your pet’s nails.
  • Application: these pet grinder replacements for nail smoother are suitable for sanding dog nails, which is good for dog claw care.
Check Stock

22 Pet Nail Grinder Replacement Kit with Grit Sanding Bands Pet Nail Smoother Dog Claw Care Black Grinding Drums Dog Nail Grinder Replacement Dog Claw Grooming Supplies (1/2 Inch 60 Grit and 100 Grit)

  • Dog nail grinder replacement kit: there are 10 pieces of 60 grit sanding bands for the electric grinder, 10 pieces of 100 grit sanding bands for the electric grinder, and 2 pieces of black grinding drums.
  • The outer diameter of all these pet nail grinder replacement kits is about 0.5 inches.
  • Features: 2 models of sanding bands include the medium-sized bands (60 grit) and the fine bands (100 grit).
  • Through the fast sharpening, your dogs and cats will leave smooth pet nails, keeping pet nails neat and clean.
  • Safe and convenient to use: the dog nail grinder provides your dog with a safe and less stressful alternative to using pet nail trimmers, which is a nice pet supply for dog nail trimming and grooming.
  • Easy way to use: you can adjust the screw on the top of the mandrel and loosen the grinding drum.
  • Then you need to make sure that the grinding drum is firmly fixed on the mandrel before using.
  • Next, you can slide the grinding wheel into the drum sander, and tighten the drum.
  • Finally, you can directly start to groom your pet's nails.
  • Application: these pet grinder replacements for nail smoother are suitable for sanding dog nails, which is good for dog claw care.
Check Stock

Mini Rotary Tool Corded Electric Detail Sander Grinder Set with | 121 Accessories | for Small Crafts & Projects

  • 【Good for Small & Light Projects】The rotating speed can reach 18,000 RPM ! Good for small and light crafts & projects (NOT suitable for large or heavy crafts / projects).
  • 【Small Body & Ergonomic Design】Small & lightweight body, ergonomic design, easy and comfortable to hold in the hand, letting you perform detail intricate work smoothly and effortlessly.
  • 【High Quality & Long Life】Pure Copper Collets for firm clamping.
  • High Quality Copper Motor with strong power, smooth rotation and long use life.
  • 【121-Piece Accessories】Includes 3 engraving bits, 5 grinding bits, 2 drum mandrel, 1 screw mandrel, 1 selftapping mandrel, 1 wire brush, 1 screwdriver, 2 drill bits, 2 collets, 2 steel cutting wheels, 10 felt wheels, 16 sanding bands, 40 sanding disc, 36 cutting wheels..
  • 【Widely Uses】Can be used for sanding, polishing, grinding, engraving, cutting, drilling, derusting and more. Perfect for handmade crafts and home repair works.
Check Stock

252 Pieces Drum Sander Set Including 240 Pieces Nail Sanding Band Sleeves and 12 Pieces Drum Mandrels for Dremel Rotary Tool

  • ►【MULTI-FUNCTION】120 Grit Commonest And Standard Size Sanding Bands Use For Smoothing Surface And Curved Edges. Widely Used On Smooth Surfaces And Curved Edges, Polished Soft And Hard Materials Such As Home Improvement, Engraving, Metal, Carpentry, Jade, Art And Other Diy Activities..
  • ►【EASY INSTALLATION】Drum Mandrels With Self-Expanding Rubber Cushion, Making The Sanding Bands Close To The Manderl Firmly And Acheiving Better Finishing.
  • In Case The Sanding Band Fall Apart From The Mandrel While Using, Please Make Sure The Drum Have Been Screwed Tightly And Wear Closely To The Sleeve.
  • ►【PRECISION TIGHT, NON-SLIP FIT】Our self-expanding rubber cushioned drum mandrels were especially designed to embrace the sanding bands with a snug fit, keeping the sandpaper sleeves in place, for extra fine artwork. Designed to expand once the nut on the top of the drum is tightened. Easily slide bands over drum & tighten screw for non-slip fit. Our drums should fits most other sanding bands if the sizes are compatible..
  • ►【REUSABLE】Our Drum Mandrels Were Produced With Heavy Duty Rubber For a Long Lasting Endurance. The Shanks Was Ideally Constructed With a Solid High Quality Metal That Will Easily Chuck Into Any Drill Bit And Stay Put. May Always Re....
Check Stock