Best Sanding Sleeve

Shop Fox W1772-37" 10 HP Drum Sander

  • 1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified.
  • Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H.
  • Sanding Drum Diameter: 3/4", 1", 1-1/2", 2" and 3".
  • Sanding Sleeves: 1/2", 3/4", 1", 1-1/2", 2" and 3" (1/2" sleeve fits directly on the spindle).
Check Stock

DCT 1/4 Inch Drive Drill Press Sanding Drum Kit - Rubber Sanding Drums (0.5-1.5 Inch) and Spindle Sander Sleeves, 20pc

  • [20 Piece Drill Press Kit]: Create holes, smooth out rough edges and cuts, polish, or contour irregular shapes into your projects with the DCT Sanding Drum and Sleeves 20 Piece Kit.
  • Package includes rubber barrel sanding drums (1/2”, 3/4”, 1”, 1-1/2”), abrasive sleeves (fine 120 grit, coarse 80 grit), and a plastic blow-molded carrying case.
  • [Fits Your Tools]: Drill sanding attachment bit features a 1-inch (2.54 cm) long steel shank that fits your 1/4-inch (.64 cm) tools.
  • Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachment.
  • [Varying Sizes]: Drill press sanding drum kit includes 4 reusable sanding barrel arbor drum sander bit attachments.
  • Drum sanding bit provides a different diameter to meet your needs: 1/2-inch, 3/4-inch, 1-inch, and 1-1/2 inch (1.27 cm, 1.9 cm, 2.54, and 3.8 cm).
  • [Replacement Sleeves]: Kit includes 4 replacement sandpaper aluminum oxide bands for each size mandrel for a total of 16 sanding bands.
  • Each size features two 80 and two 120 sandpaper grits to meet your needs.
  • Mandrels fit other brands of sandpaper up to 2.5 inches (6.4 cm) in height.
  • [Built to Last]: Constructed of rubber grain and stainless steel, the 4 round sanding drum bits are designed for woodwor....
Check Stock

162pcs Sanding Drum Kit, Sanding Bands Sleeves for Drum Sander with Drum Mandrels for Rotary Tool

  • 20 PIECE DRILL PRESS ACCESSORIES: Create holes, smooth out rough edges and cuts, polish jade and other art materials, or contour irregular shapes into your projects with the ABN 20 Piece Drill Press Sanding Drum Kit.
  • Use these drum sanders for woodworking and metalworking.
  • All pieces are packaged in a plastic blow-molded case for convenient storage, safe travel, and easy organization.
  • PERFECT SIZE ROTARY SANDING DRUMS FOR YOUR NEEDS: This drill press drum sander kit includes 4 reusable barrel sander arbor drum sander bit attachments that can fit your tools.
  • Each sanding bit provides a different diameter to meet your needs: 1/2-inch, 3/4-inch, 1-inch, and 1-1/2 inch (1.27 cm, 1.9 cm, 2.54, and 3.8 cm).
  • FITS YOUR TOOLS: Each drill drum sander attachment bit features a 1-inch (2.54 cm) long steel shank that fits your 1/4-inch (.64 cm) tools.
  • Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachments.
  • Easily screw the shank of one of the sanding drill bit attachments into your tool then slip the correct sized sanding band over the mandrel and begin using your tool.
  • REPLACEMENT SANDING SLEEVES: Not only does this drill sander kit include 4 reusable rotary tool sanding drums, but it also includes 4 ....
Check Stock

hiltex 10342 Sanding Drum Kit | 26-Piece | Assorted Sanding Sleeves and 5 Rubber Drums | 1/2, 3/4, 1, 1-1/2, and 2-Inch | Woodworking

  • DRILL SANDING ATTACHMENT KIT: The HILTEX Sanding Drum Kit is the ultimate attachment set for sanding out holes, buffing wood, and creating smooth edges and shapes. This 26-piece set includes rubber drums and sandpaper sleeves for all your sanding needs..
  • HIGH-QUALITY SANDER ATTACHMENTS: These drum-sander drill attachments are lightweight and durable for any wood surface that needs buffing. The metal sander drums have sturdy sandpaper sleeves attached that spin with the drum bits with ease..
  • HOW TO USE: To use these drum sanders, simply attach the end of a bit to your chosen power tool. Each self-expanding cushioned drum is designed to hug the abrasive sandpaper sleeve for a tight grip that keeps the paper in place..
  • VERSATILE & COMPATIBLE: Our rotary sander-drum attachments come in 5 different sizes and are mounted on 1/4-inch shanks. This accessory kit is compatible with drill presses and other hand power tools and is great for all kinds of home and work projects..
  • WHAT’S INCLUDED: This sanding kit includes 5 rubber drums (1/2.
Check Stock

D1/4\ Nail Drill Sanding Bands Sleeves Bits Dog Nail Sanding Bit with 2 Mandrel Compatible with Most Rotary Tools Bit,Grit 80,102 Pics

  • Essential accessory - 80 grit commonest and standard size sanding bands use for smoothing surface and curved edges, polishing both soft and hard materials, like home improvement, artwork and woodworks.
  • Good on metals, woods, plastics, ceramics, etc.Easy to use: just need to slide the sanding drums into the drum sander, make sure the drum has been screwed tightly, you can directly start your project..
  • Easy installation - drum mandrels with self-expanding rubber cushion, making the sanding bands close to the manderl firmly and acheiving better finishing.
  • in case the sanding band fall apart from the mandrel while using, please make sure the drum have been screwed tightly and wear closely to the sleeve.
  • Great compatibility - there are the commonest and standard size sanding drum set which are widely applied in smoothing surface and curved edges, polishing both soft and hard materials, like home improvement, artwork, woodworks and other DIY finishing and work.
  • 100 piece 80 Grit, 1/2"(6.35mm) Diameter+ 2 piece 1/4" Diameter Mandrels.1/8" shank size (Fit most Rotary Tools).
Check Stock

3\x9\ Rubber Sleeve Tube Pneumatic Drum Sander + 5Pcs 120 Grit Drum Sanding Sleeves Aluminum Oxide Sanding Belts Accessories for Woodworking,Furniture and other Non-Metal Polishing

  • [PACKAGING INCLUDES] - 1pcs 3"x9" Pneumatic Drum Sander+ 5Pcs 3"x9" 120# drum sanding Sleeves..
  • [FITMENT] - The polishing air drum is used for polishing the air drum motor, and it is used for polishing wood with other processing materials..
  • [FUNCTION] - Mainly used for all kinds of wood, furniture, and other non-metal polishing.This pump sleeve sanding attachment can be mounted on any long 1" diameter arbor or even mounted between centers on a lathe to allow sanding of odd shapes or contours..
  • [HIGH QUALITY] - The wear-resistant thickening rubber and aluminum shaft wheel are adopted to prevent rust and make it lighter, more efficient and durable.5Pcs drum sanding Sleeves is Premium aluminum oxide sanding belts,good abrasion resistance, have good effect..
  • [AFTER SALE] - Manufacturer warranty for 90 days from date of purchase.We are committed to provide excellent customer service,If you have any questions,please contact us.We will try our best to solve your problem..
Check Stock

Triton TSPS450 3.5Amp Cast Iron Top Oscillating Spindle Sander, Orange

  • Ideal for sanding contours, arcs, curves & other irregular shapes.
  • Rotating & oscillating action for increased speed, efficiency and a precision finish.
  • Powerful 3.5A (450W) motor No Load Speed - 2000 RPM Oscillation Speed - 58 OPM.
  • Includes 6 sanding sleeves with matching rubber drums & table inserts.
  • On-board storage for all accessories. Sleeve Range - 1/2 - 3 inches.
Check Stock

252 Pieces Drum Sander Set Including 240 Pieces Nail Sanding Band Sleeves and 12 Pieces Drum Mandrels for Dremel Rotary Tool

  • ►【MULTI-FUNCTION】120 Grit Commonest And Standard Size Sanding Bands Use For Smoothing Surface And Curved Edges. Widely Used On Smooth Surfaces And Curved Edges, Polished Soft And Hard Materials Such As Home Improvement, Engraving, Metal, Carpentry, Jade, Art And Other Diy Activities..
  • ►【EASY INSTALLATION】Drum Mandrels With Self-Expanding Rubber Cushion, Making The Sanding Bands Close To The Manderl Firmly And Acheiving Better Finishing.
  • In Case The Sanding Band Fall Apart From The Mandrel While Using, Please Make Sure The Drum Have Been Screwed Tightly And Wear Closely To The Sleeve.
  • ►【PRECISION TIGHT, NON-SLIP FIT】Our self-expanding rubber cushioned drum mandrels were especially designed to embrace the sanding bands with a snug fit, keeping the sandpaper sleeves in place, for extra fine artwork. Designed to expand once the nut on the top of the drum is tightened. Easily slide bands over drum & tighten screw for non-slip fit. Our drums should fits most other sanding bands if the sizes are compatible..
  • ►【REUSABLE】Our Drum Mandrels Were Produced With Heavy Duty Rubber For a Long Lasting Endurance. The Shanks Was Ideally Constructed With a Solid High Quality Metal That Will Easily Chuck Into Any Drill Bit And Stay Put. May Always Re....
Check Stock

307 Pieces Drum Sander Set GOCHANGE Sanding Drum Kit - 300 Pieces Sanding Band Sleeves (80#/120#/240#) + 6 Pieces Drum Mandrels for Dremel Rotary Tool (2.35mm/3.17mm)+ 1 Combination Wrench

  • ✔MULTI-FUNCTION: 300 Grit Commonest And Standard Size Sanding Bands Use For Smoothing Surface And Curved Edges. Widely Used On Smooth Surfaces And Curved Edges, Polished Soft And Hard Materials Such As Home Improvement, Engraving, Metal, Carpentry, Jade, Art And Other Diy Activities..
  • ✔EASY INSTALLATION: Drum Mandrels With Self-Expanding Rubber Cushion, Making The Sanding Bands Close To The Manderl Firmly And Acheiving Better Finishing.
  • In Case The Sanding Band Fall Apart From The Mandrel While Using, Please Make Sure The Drum Have Been Screwed Tightly And Wear Closely To The Sleeve.
  • ✔PRECISION TIGHT, NON-SLIP FIT: Our self-expanding rubber cushioned drum mandrels were especially designed to embrace the sanding bands with a snug fit, keeping the sandpaper sleeves in place, for extra fine artwork. Designed to expand once the nut on the top of the drum is tightened. Easily slide bands over drum & tighten screw for non-slip fit. Our drums should fits most other sanding bands if the sizes are compatible..
  • ✔REUSABLE: Our Drum Mandrels Were Produced With Heavy Duty Rubber For a Long Lasting Endurance. The Shanks Was Ideally Constructed With a Solid High Quality Metal That Will Easily Chuck Into Any Drill Bit And Stay Put. May Always Reuse Acco....
Check Stock

WEN 5932SPC Replacement Spindle Sanding Sleeves, Assorted Sandpaper Grits, 12 Pack

  • Includes four 80-grit sleeves, four 120-grit sleeves and four 240-grit sleeves.
  • Features a 1/2-inch, 3/4-inch, 1-inch, and 1-1/2-inch diameter sleeve in each grit.
  • Each sanding sleeve measures in at 3 inches in length.
  • Perfect for material removal, resurfacing and more.
  • Designed to fit the WEN HA5932 handheld Oscillating spindle sander.
Check Stock

ZOENHOU 24 Pack Sanding Sponge, 60 80 100 120 180 220 Grit Sanding Block Sandpaper, for Wood Assorted Blocks Assortment Drywall Metal Repair Set

  • VALUE SANDING SPONGE BLOCK - This sanding block set for wood is available in 24 pieces that includes grit 60 80 100 120 180 220, each grit comes with 4 pieces to meet your different need, allowing you to easily and conveniently polish the surface of walls or wooden furniture..
  • WET AND DRY SANDING SPONGE - The sanding sponge can be used for wet sanding or dry sanding on wood, paint, metal, plastic, drywall and other surface, allowing you to easily and conveniently remove rusty places, sanding smooth surface, and giving things a new look..
  • FLEXIBLE DOUBLE-SIDED SANDING - This frosted sponge is very soft and has a double-sided sandable design that makes polishing and sanding more convenient. These sanding blocks for wood can be washed and reused, which are very economical and environmentally friendly..
  • HIGH QUALITY AND WEAR RESISTANT - These sandpaper sponge blocks are made from high-density sponge as the base material, with good resilience, strong plasticity, not easy to tear, and durable. The sandpaper for drywall metal is widely used in woodworking sanding, wood bead sanding, wooden furniture sanding, metal products rust removal, etc..
  • GET SATISFIED WET DRY SANDING SPONGES - These frosted sponges are easy to identify, ranging from coarse sand (60) to coa....
Check Stock

5 inch Sanding Mouse Hook and Loop Sanding Block. Ideal For Woodworking, Furniture Restoration, Home and Automotive Body. Hand Sander Accepts Standard Orbital Sanding Discs w/Hook and Loop Backing

  • This is the perfect sanding accessory that looks and feels just like a sander should unlike there distant cousins… sanding blocks. Sanding blocks are just that, sanding blocks. They can be kind of handy but keeping the sandpaper on the block can be a bit of a challenge and they are altogether clunky to use..
  • Other new fangled “sanding blocks” have clips that sort of work until they don’t and even more types force you to buy expensive sanding belts to fit there version of a “sanding block”. It would be great if we just use the sandpaper most of us already have in our shops. Introducing the Sanding Mouse!.
  • A one of a kind, ergonomically designed sanding tool that is so simple and feels so familiar in our hands, it’s a wonder why it took so long for someone to think of it. The Sanding Mouse is made from a sturdy, yet flexible composite material and has a hook and loop base. The Hook and loop base is designed to accept orbital sanding discs that most of us already have in our shop..
  • It will work with any hole pattern of sanding disc or even no hole sanding discs. Your hook and loop paper will easily attach and easily come off of the Sanding Mouse when its time to change paper or grits..
  • The sides of the Sanding Mouse are uniquely angled slightl....
Check Stock

Hand Sanding Blocks Auto Body - Mouse Sandpaper Woodworking Hand Tools - Hook and Loop Hand Sanding Pad Block Furniture Sander Hand Tool - Automotive Sanding Pads Craft Sanding Block 5 Inch

  • Perfect Size of Sanding Tool: The base of sand mouse block for auto body fits perfectly with any 5 inch sanding disc, making it easy to change discs. The top of the block sander automotive has 3 finger slots for extra grip and even control..
  • Quality Mouse Wood Sanding: Our sanding block sandpaper for crafts is made from tough polyurethane foam (PU) - these hand tools automotive sanding block set have high quality hook and loop base which is flexible and also very durable and lightweight..
  • Hook and Loop Sanding Disc Base: Hook loop backing plate function for quick pad change, prevents pad displacement and rotation, loop with hook allows for easy removal of the abrasive disc sanding block without general wear..
  • Sands & Surface: The drywall finger sander for crafts are the ideal innovative sanding block companion with slightly angled sides Hook and Loop Hand Sanding Pad . This small hand sanding block will come handy when you require neat and elegant finish of the surface..
  • Application of Auto Sanding Tools: This hand sanding blocks for wood Ideal for use with any 5inch drywall sanding bar discs, soft sander block, abrasive mouse sanding pads, contact pad. This hook loop backing pad is ideal for woodworking, hobby, arts and crafts..
Check Stock