Categories

Best Sandpaper For 3d Prints

3D Print Removal Accessories– 3 Piece 3D Printing Removal Tool Kit – High Quality Tools to Remove Models from 3D Printers

  • EASY REMOVAL: Our tool kit ensures that you can easily lift – not pry – your models from the 3D printer print bed every time..
  • NO DAMAGE: The accessories allow fast and efficient removal of your 3D prints without damaging either the model or the print bed..
  • 3 PIECE KIT: The 3D printing tools are designed to be used either separately or together to gently lift your prints, however small, large or delicate..
  • TOUGH & DURABLE: The high quality wooden handles are pinned to the blade to keep them firmly in position, for reliable results however tough your 3D print removal!.
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing supplies of the highest quality. If there are any problems with your Removal Tool Kit just let us know!.
Check Stock

taulman3D Nylon 230 3D Printing Filament Black - 1.75mm (1kg)

  • Nylon 230 3D Printing Filament Prints Easily at 230C, Allowing You to Use It On Any 3D Printer.
  • Nylon Filament for 3D Printing. There Are Some Great Nylons Out There for 3D Printing But Many of Them Cost A Lot. Nylon 230 is the Affordable taulman3D Nylon and The First to Print at 230C.
  • Made in America. The Supply Chain of taulman3D Products is Different Than Your Standard Filament Maker. Every Roll is Manufactured in the US..
  • 1.75mm Diameter Nylon 3D Printing Filament Which Prints Easily at 230C.
  • 1kg Spool. Consistent Diameters Checked by Laser Technology.
Check Stock

1Roll 4mm Dental Polishing Strip Resin Teeth Whitening Products Tooth Interdental Sanding Grinding Whitening Teeth Tool(Blue),Hand Tools & Accessories

  • Made of high quality sandpaper, and sturdy, total 4pcs to meet your needs..
  • Double sided available straight sandpaper strip, easy to grip, can bring high efficiency..
  • Sanding to remove the defect on such as pits or little black dots, convenient to use..
  • DIY model grinding strip, great effects of the grinding, can well handle the uneven surface of the model..
  • Can be used for detail grinding, very suitable for 3D printing models sanding..
Check Stock

Silicon Power 64GB 2-Pack 3D NAND High Speed MicroSD Card with Adapter

  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. And it is turning more and more into a full-on 3D printer operating system.
  • Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways.
  • Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
  • Supports create awesome timelapse recording of all your favorite 3D prints and so much more.
Check Stock

3D Solutech Real Grey 1.75mm Flexible 3D Printer Filament 2.2 LBS (1.0KG)

  • PRODUCES THE BEST 3D PRINTS: This 3D printing filament offers excellent dimensional accuracy with no more than 30 microns of diameter variance. This allows for better and more consistent feeding as well as higher quality 3D prints. You can get professional results right from your own 3D printing machines..
  • HIGHLY COMPATIBLE: We at 3D Solutech are proud to provide you with flexible PLA filament that is compatible with almost all 3D printers, including those from RepRap, MakerBot (such as the Replicator and Replicator 2), Ultimaker, Bits from Bytes, Airwolf 3D, MakerGear, Printrbot, Bukobot, Type A Machines, and many more..
  • MEETS ALL 3D PRINTING NEEDS: At 3D Solutech, our durable printing filament is highly versatile and can meet all of your 3D printing needs and applications. It comes in a variety of 3 different colors, including white, silver, hot pink, navy blue, and more. No wonder it’s the first choice of engineers and designers!.
  • ENVIRONMENTALLY FRIENDLY: Did you know that our PLA filament is stronger than alternative PLA filaments? It consists of polylactic acid and algae harvested from areas where it harms the environment in excess amounts. Additionally, it requires less energy to print because it requires a low printing temperature..
Check Stock

JAYO 3D Printer Silk Filament, Low Shrinkage and Smoother Surface Consumable 1.75mm, Dimensional Accuracy +/- 0.02mm, 3D Printing Material Suitable for FDM Printers, Silk Silver 1KG

  • ...nce.Given a silk texture, touch,color on 3d models, which can meet your demand of printing objects with some silk features..
  • 【High Precision】JAYO 3D printer silk filament are produced with high precise specification. Dimensional Accuracy 1.75mm + / - 0.02 mm. No bubbles, low shrinkage to ensure smooth and stable prints.3D Filament enriches your imaginary world..
  • 【Neat Filament】Adopting full mechanical winding and strict manual examination, which make sure the silk filaments tidy and easy to be fed.Say goodbye to the tangling issue and inconstant printing process,which prints you a smoother 3d models surface..
  • 【Print Parameter】Our 1KG Silk Filament recommended nozzle temperature is 200 - 230°C, Heated Bed Temp: 60°C - 80°C. Melt index: 4-8g/10min.Precise 3D print parameters remove your printing confusion and worry..
  • 【Wide Compatibility】With the years of 3D printing consumables research and develop experience. Making JAYO filament harmonizes perfectly with all common 1.75mm FDM 3D printers..
Check Stock

Norton Abrasives - St Gobain ProSand 9 in x 11 in Sanding Sheets 400G - 20 Pack

  • This sandpaper product is crafted using a premium, heat-treated abrasive to create an extra fine grit sandpaper sheet that cuts faster and longer....
  • Pair this premium sandpaper product with your sanding block, sanding board or use the sandpaper by hand to finish and prepare the surfaces of hard and....
  • This sandpaper is non pigmented and has a water-based anti-clog coating. With no color dye for zero color transfer this sandpaper is the best....
  • This sandpaper is a fine grit sandpaper designed for the cleaning, detailing, finishing and sanding after using a coarse sandpaper for a heavier stock....
  • Sandpaper developed from Aluminum Oxide. 9 x 11 Inch Dimensions. Super Fine, 400 Grit Sandpaper. Comes in a pack of 20 sandpaper sheets.
Check Stock

OctoPrint Pre-flashed 32GB Micro SD Card for 3D Print Monitoring Controlling Compatible with Most Consumer 3D Printer

  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. And it is turning more and....
  • Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways.
  • Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
  • Supports create awesome timelapse recording of all your favorite 3D prints and so much more.
Check Stock

Dremel DigiLab PETG-TRA-01 3D Printer Filament, 1.75 mm Diameter, 0.75 kg Spool Weight, Color Translucent, RFID Enabled, New Formula and 50 Percent More per Spool

  • NEW MATERIAL FORMULATION tested for improved print quality, reliability and longer filament shelf life.
  • DREMEL DIGILAB PETG FILAMENT provides higher strength and flexibility than traditional PLA.
  • RFID ENABLED for material detection and quantity tracking with Dremel DigiLab 3D45 3D printer.
  • TRANSLUSCENT COLOR: 1.75mm ECO-ABS Filament.
  • COMPATABILITY with all Dremel DigiLab 3D45 3D printers and other manufacturers. Prints at 250C nozzle temperature with heated bed up to 80C..
  • BEST USAGE for 3D prints that need durability, temperature resistance, and reliable layer adhesion.
Check Stock

3D Printers, Mini 2-in-1 3D Laser Engraver Printer with Removable Heated Bed, DIY Desktop 3D Printers for Beginners with PLA Filament, Smart Control, Resume Printing, 90% Pre-Assembled

  • ...r students and DIY enthusiasts. It comes with a convenient handle for easy portability, and its lightweight design makes it easy to move. Assembly can be completed in as little as 10 minutes with the included assembly video. Take it with you wherever you go!.
  • Picks Up Prints After Outages & Filament Sensor - The CRUX-1 comes with several features that ensure your prints are always on track. It picks up prints after outages and has a filament sensor that stops working in case of accidents like filament breakage or blockage. It resumes printing before feeding in new filament. The printer supports STL, OBJ, and other printing file formats..
  • 3D Laser Printer with Wide Compatibility - With the CRUX-1, you can also enjoy laser engraving. The laser engraving machine comes with protective goggles to protect your eyes from the dazzling beam. It's compatible with various software, such as Ultimaker Cura (for 3D printing), LaserGRBL (free), and LightBurn (paid), and supports Windows XP/7/8/10 as well as the MAC system (for LightBurn). The engraving file format supports NC, BMP, JPG, PNG, DXF, and more..
Check Stock

Octave Blue ABS Filament for 3D Printers - 1.75mm - 1kg Spool

  • STRONG AND DURABLE 3D PRINTS - ABS is one of the plastic filament materials most commonly used for 3D printing. It produces durable 3D printed models that have higher resistance to heat and are less brittle than those printed with some other popular 3D printing materials (like PLA).
  • HIGH QUALITY ABS FILAMENT - Octave engineered its ABS filament to work at a wide extruder temperature range, and manufactures it to tight tolerances using quality materials, so it works smoothly and consistently.
  • PROFESSIONAL 3D PRINTED MODELS - Models printed with Octave ABS filament are tougher, more durable, and more heat resistant than models 3D printed with PLA, and have more in common with mass-produced plastic models and parts. Octave ABS can be sanded, glued, and painted, as well as post processed in an acetone vapor bath for a smoother, glossy finish..
  • WIDE COMPATIBILITY - Octave ABS filament prints at temperatures from 210-250℃, so it works well with most 3D printers that support 1.75mm ABS filament, like Raise3D, ZMorph, Afinia, FlashForge, Creality, Fusion3 F410, UP, PrintrBot, MakerGear, Solidoodle, CraftBot, and others (80-120℃ heated print bed strongly recommended, external spool holder may be required—always check your printers’ specifications)..
Check Stock

Hornet Needle Kit, Hollow Knight Cosplay

  • 3d Printed in sections that will need to be assembled.
  • 3/8 Dowel rod needed for assembly (not included).
  • Super glue is great for combining the sections.
  • sand with 220 grit sandpaper and use spray primer to get rid of the layer lines..
Check Stock

Norton Abrasives Sandpaper Sheet, Multisand 220 Grit Sandpaper, Very Fine Sanding Sheet, Pack of 60 Sanding Sheets

  • This sandpaper product is crafted using a premium abrasive to create a very fine grit sandpaper sheet that cuts faster and longer than ordinary sandpaper and is a great sandpaper for metal, wood and or glass.
  • Pair this premium sandpaper product with your sanding block or use the sandpaper by hand for general sanding wood, metal, plastic and fiberglass, as well as removing old paint.
  • This sandpaper is made from Aluminum Oxide with an open-coat that provides aggressive cutting action for all dry sanding applications.
  • Designed with a fine, 220 grit sandpaper design for final sanding of surfaces prior to coating with stain, primer or sealer.
  • Sandpaper developed from Aluminum Oxide. 4-1/2 x 5-1/2 inch dimensions. Very fine, 220 grit sandpaper. Comes in a pack of 60 sanding sheets.
Check Stock