Micro SATA Cables USB 3.0 mSATA SSD Adapter as USB Disk Driver

  • USB 3.0 mini pci-e mSATA SSD adapter card that can be used a USB 3.0 Drive. It is for mSATA SSDs with the Intel pin out.
  • Authentic only if sold by Micro SATA Cables..
  • Categories: Drive Adapters, Drive Converters, MSATA Adapters, MSATA Adapters, MSATA Adapters / mini PCI-E, USB 2.0 & 3.0 Adapters, USB 2.0 & 3.0....
Check Stock

Benfei 15 Pin SATA Power Y-Splitter Cable 8 Inches - 2 Pack

  • Y-SPLITTER SATA CABLE powers two Serial ATA HDD, SSD, optical drives, DVD burners, and PCI cards to a single connection on a computer power supply.
  • Snug-fitting drive SATA connector and channel guides on the power supply connector provide a secure connection that won¡¯t accidentally disconnect.
  • UPGRADE COST SAVER SATA power cable spares the expense of upgrading an existing power supply to connect a new SATA drive.
  • Cost-effective 2-Pack provides spare SATA extension power cables for new installations or repairs..
  • DIY or IT installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
  • 8 inch cable harness (not including connectors) provides sufficient length for internal cable management in most configurations.
  • HEAVY DUTY SPLITTER with 2 SATA 15 pin female connectors and 1 SATA 15 pin male is constructed with flexible 18 AWG conductors for reliable performance when connecting two SATA hard drives to a power supply.
  • Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
  • COMPATIBLE with popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, Asus 24x DVD-RW S....
Check Stock

Cable Matters 2-Pack 15 Pin SATA to 4 SATA Power Splitter Cable - 18 Inches

  • SATA splitter cable powers up to four Serial ATA HDD, SSD, optical drives, DVD burners, and PCI-E cards from a single connection to computer power supplies.
  • Snug-fitting drive SATA power cable clicks into place on your power supply to provide a secure connection that prevents accidental disconnection.
  • Upgrade cost saver SATA power splitter cable spares the expense of upgrading an existing power supply to connect new SATA drives.
  • Cost-effective 2-pack provides a spare power cable for new installations or repairs.
  • Keep a spare in your IT toolkit or at the test bench.
  • DIY or pro installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
  • 18 inch cable harness has 4 SATA drive receptacles spaced at 4.5 inch intervals.
  • Provides sufficient length for internal cable management to minimize airflow impact in most configurations.
  • Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end.
  • Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply.
  • Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
Check Stock

Cable Matters 2-Pack 6 Gbps SATA III to eSATA Cable 3 Feet

  • ...pecifically designed to connect existing motherboards with SATA port to an external hard drive, enclosure or docking station with eSATA.
  • Convenient alternative to using a USB port on your computer.
  • Blazing fast SATA III speeds up to 6 Gbps are faster than USB 3.0 equipped drives and much faster than a USB 2.0 to HDD adapter.
  • Upgrade to an eSATA enabled TB hard drive for direct file back-up instead of using a network.
  • Provides secure connections for fast and reliable file transfers.
  • Backwards compatible with SATA I, II, III hard drives.
  • Fully shielded & flexible eSATA to SATA cable is engineered to reduce EMI noise interference.
  • Latching SATA connector attaches securely for a trouble-free installation.
  • Flexible cable jacket allows installation in tight computer cases.
  • SATA and eSATA connectors are keyed differently to avoid connecting incorrectly.
  • Cost-effective 2-pack provides spare or superior replacement SATA to ESATA cable cable to fix troublesome connection problems.
  • Longer cable length allows location of an external hard drive in a convenient location.
  • Low cost way to add eSATA when you have a free internal SATA port or to repurpose older SATA internal hard drives..
  • Compatible with Acomdata eSATA HDD Enclosure, Anker eSATA HDD Docking Station, Fanto....
Check Stock

PCI 32 BIT Riser Card with Flex Crypto Mining Cable

  • PCI 32 BIT Riser Card with Flex Cable. 1-slot PCI 32 bits/5V 66MHz riser card with 6" flexible cable..
  • Authentic only if sold by Micro SATA Cables..
  • Categories: Drive Adapters, Drive Converters, PCI & PCI-E Products, PCI / PCI-E Cards.
Check Stock

Dayree 3Pcs Sata Cable 15 Pin Sata Power Cable Sata Power Splitter for HDD, SSD, Optical Drives, DVD Burners, PCI Cards, Hard Drive Disk 13'

  • Extend the 15 pin power interface of the motherboard to the desktop, bookcase, etc, connect the hard disk to read data anytime, anywhere, simple, convenient and fast.
  • 15 pin SATA male to female extender cable cord adapter connects a computer power supply to Serial ATA HDD, SSD, optical drives, DVD burners, and PCI cards, lock connector design is adopted to prevent accidental disconnections.
  • Flexible 18 AWG power extension cable with multi-voltage compatibility, widely compatible with Sata, hard disk, optical drive, SSD, PCI-E card and other devices with SATA.
  • Extend the motherboard power interface, reduces the risk of damage to the drive or motherboard SATA connector by eliminating the need to tighten or stretch the cable to make the necessary connections.
  • 15 Pin ssd power cable are adopted environmentally friendly technology, fine workmanship, strong flexibility, anti-wear, good quality, length is 33.5cm (13.18").
Check Stock

iecables SCSI Adapter CN50 Male to DM50 Female - Molded

  • [U.2 to PCIe Adapter] Extending an U.2 (SFF-8639) Interface on your desktop or server for 2.5" U.2 NVMe SSD, or you may need install an 2.5" SATA SSD to original SATA 3 Port sometime. This U.2 to PCIe 3.0 x4 Adapter meets both of your requirement.
  • [Bandwidth PCI-e 3.0 x4 ] Compatible with PCI Express 3.0 x4/x8/x16, ensure your 2.5" U.2 NVMe SSD runs in full performance. Backward Compatible with PCIe 2.0/1.0, the speed will be slower.
  • [Installation]1. When install 2.5" U.2 NVMe SSD, only PCI-e slot needed 2. When install 2.5" SATA SSD, SATA data cable needed to be connected.
  • [Please Note] 1. It can not be as a system disk if MOBO does not support NVME protocol, only as a storage disk 2. Please install WIN10 system.
  • It may need install driver if WIN7, and the speed may not be improved.
  • [Package including] 1x U.2 NVMe to PCI-e Adapter , 1x SATA3 Cable, Mounting Screws for SSD.
Check Stock

Intel Integrated RAID Module Storage Controller RMS25KB040

  • This RAID controller has four internal SAS/SATA ports and uses a x8 or wider PCI Express* server board slot.1.2 Operating System Support Supports SAS/SATA devices at speeds up to 300 MB/second per port Supports the SATA II protocol over SAS transp.
  • Contains four internal SAS/SATA ports Supports up to 8 SAS/SATA II devices via expanders Supports up to 64 virtual disks Supports up to 8 arrays Supports RAID levels 0, 1, 5, 6, 10, 50, and 60 Hardware exclusive OR (XOR) assistance.
  • Online capacity expansion Online RAID level migration Physical drive roaming RAID controller migration Fast virtual drive initialization Hot-spare drive configuration, both private and global.
  • SATA drive hot-plug Staggered spin-up Native command queuing Support for SMART* Auto rebuild Variable data stripe size configured per virtual drive.
  • 128 MB of ECC DDR2 667 MHz SDRAM integrated on the controller Read and write cache policy SES2 intelligent enclosure support PCI hot-plug support Background media test (patrol read) Background data integrity test.
Check Stock

Ableconn PEX-SA156 6-Port SATA 6G PCI Express x4 Host Adapter Card (ASMedia ASM1166 Controller)

  • Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 / SATA1.0.
  • Comply with PCI-Express v3.0 specification and backward compatible with PCI-Express v2.0 / 1.0..
  • PCI-Express X4 interface, chip signal is 2X, compatible with PCI-Express X4 /X8 /X16 slot. (It is recommended to use faster under PCI-E 3.0)Powerful chip: ASMedia ASM1166 chip, heat sink, long-lasting high temperature resistance, high speed and stable transmission..
  • Supports up to 10 SATA3.0 interfaces,Compatible with SATA6G,3G and 1.5G hard drive,Supports communication speeds of 6Gbps,3Gbps,1.5Gbps.
  • No driver required, support hot swap, system support: Windows/8/10/Ubuntu/Linux,Note: MSI X470 and X570 are not compatible with this card.
Check Stock

I/O Crest 4 Port SATA III PCI-e 2.0 x2 HyperDuo RAID Card Marvell 9230 Chipset SI-PEX40057

  • Compatible with SATA 6G, 3G and 1.5G Hard Drives.
  • PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiering technology into the chipset..
Check Stock

Richer-R RAID Contreller Card,RAID Controller SAS 9311-8i 12G SAS3008 12Gb SFF8643 with PCI-Express 3.0 Interface for Windows Vista / 2008 / Server 2003 / for Linux

  • Compatible with SATA 6G, 3G and 1.5G Hard Drives.
  • PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiering technology into the chipset.
  • PCI-Express x2 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiring technology into the chipset..
  • Does not support Hardware RAID using Port Multiplier.
Check Stock

5 Slot M.2 B-Key SATA Base SSD PCI-e 3.0 x2 Bandwidth Expansion Card Require x16 Slot SI-PEX40142

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.(Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

StarTech.com M.2 SATA SSD to 2.5in SATA Adapter - M.2 NGFF to SATA Converter - 7mm - Open-Frame Bracket - M2 Hard Drive Adapter SAT32M225

  • BOOST SYSTEM PERFORMANCE: Easily increase system performance by adding the speed of an M2 SSD in any 2.5" SATA application with the M2 SSD to 2.5in....
  • BROAD COMPATIBILITY: The M2 to SATA converter supports full length M2 SDD solid state drives and can mount multiple drive heights including: 2230,....
  • INCREASED TRANSFER SPEEDS: Utilize the full potential of your SATA III controller with an M2 SSD, reducing your data transfer bottleneck with file....
  • HASSLE-FREE SETUP: This M2 hard drive adapter offers fast and easy setup with no drivers to install.
  • Mounting hardware included with M2 SSD to SATA....
  • Not compatible with M.2 NVMe or AHCI PCI-Express SSDs.
Check Stock