Categories

Best Sata To Usb 2 0 Adapter

SATA to USB 2.0 Cable Adapter for 2.5 HDD SSD Hard Drive Connector 22 Pin 7+15 SATA 1 2 3 External Converter

  • USB 2.0 to SATA 15+7 pin connector cable allows you to connect any standard 2.5" or 3.5" SATA HDD mobile enclosure to your computer/laptop via USB 2.0....
  • Add drive space to your laptop by connecting to a SATA 2.5" SATA SSD or HDD using this SATA to USB cable. You can connect to an external drive to: add....
  • Extended Compatibility: USB 2.0 sata hard drive adapter is compatible with PS4, Windows 10/8.1/8/7/Vista/XP/2000/98, Mac OS X. Supports 2.5''/3.5''....
  • Up to 480Mbps High Speed: This is USB 2.0 version, backward compatible with USB 1.0, data transfer rates up to 480Mbps..
Check Stock

SATA to USB A Cable, USB 3.0 SATA I/II/III Hard Drive Adapter Cable for 2.5 inch SSD & HDD [Optimized for SSD/HDD Data Transfer, Support UASP ] Black

  • ...ect SATA 2.5" SATA SSD or HDD with SATA to USB cable to provide more extra space for your laptop. You can connect external drives: add storage, perform backups, create disk images, implement data recovery, and transfer Content to your laptop. (3.5'' SSD and HDD are not supported).
  • Transmission speed: The SATA to USB adapter supports 6Gbps USB 3.0 data transmission speed. The product supports the UASP acceleration protocol. When you connect to a computer that supports UASP, the data transmission speed can be 70% faster than traditional USB 3.0. It is backward compatible with USB 2.0 and USB 1.1..
  • Easy to use: USB to SATA cable does not need to install drivers, plug and play, SATA to USB 3.0 adapter supports hot-swap, 2.5-inch driver does not require an additional power supply.
  • LED indicator: red shows power status, blue shows active status..
  • Multi-system support: SATA cable to USB compatible with USB 3.0 computer systems, such as Dell Optiplex & Apple Mac & MacBook and 2.5in SATA hard drives and solid-state drives, such as Samsung 840 EVO series and Crucial MX 100 series. System requirements: Windows: XP/Vista/7/8/8.1/10, MAC: OS X, Linux.
  • Technical support team: Unconditional warranty for 12 months. If you encounter any product or technical problems, ple....
Check Stock

AGPtek SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for Hard Drive Disk HDD 2.5" 3.5", Compatible with USB 1.1/2.0/3.0, with External AC Power Adapter Included

  • ◆ USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage..
  • ◆Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your ide to usb adapter to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver..
  • ◆ Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed..
  • ◆ AGPtEK sata to usb adapter can be easily connected to the IDE device / SATA device and make the hard disk device more portable..
  • ◆ This usb sata ide adapter is easy to use and plug & play, no drivers needed..
Check Stock

USB 3.0 to SATA IDE Hard Drive Reader YINNCEEN External Hard Drive Converter Universal Hard Drive Adapter Kit for 2.5/3.5 HDD/SSD Hard Drive Disk Include 12V/2A Power Adapter

  • 【Universal Hard Drive Adapter】 SATA IDE to USB adapter allows connect your SATA / IDE device to computer as an external hard drive via USB 3.0.....
  • 【Transfer Rate up to 5Gbps】 SATA to USB 3.0 adapter supports super speed USB 3.0 enables data transfer rates of up to 5Gbps, backward compatible....
  • 【Wide Compatibility】 Hard drive to USB adapter support Operate Systems: Support Windows XP/Vista/7/ 8/8.1/10, Mac OS 10 or higher, Linux. Compact....
  • 【Support Hard Drives Capacity up to 6TB】 Hard drive adapter has a SATA III connector and two IDE connectors (40pin and 44pin). we Provide a 4pin....
  • 【Included 12V 2A Power Supply】 USB 3.0 to IDE SATA adapter included 12V2A AC power supply, for power up the 5V/12V IDE devices usage, ensures SATA....
Check Stock

Unitek USB Type-C to SATA III Hard Drive Adapter External Kit Cable for 2.5 3.5 Inch HDD/SSD Hard Drive Disk, Optical Drive,with 2V/2A Power Adapter, Support UASP

  • UNIVERSAL HARD DRIVE ADAPTER - Supports any standard 2.5" /3.5" SATA I/II/III SATA SSD HDD capacity up to 10 TB, and optical drive, can be used on Windows XP/Vista/7/8/10 and Mac OS..
  • USB A & TYPE C CONNECTER - Connect to the SATA device using USB A & Type C interface. No drivers needed for you to enjoy its outstanding performance. Support Windows 7/8/10/MAC OS 8 or above..
  • SUPERSPEED USB 3.0 - Data transfer rates of up to 6Gbps only for SSD. USB 3.0 version, supports data transfer speeds up to 5 Gbps, Backward compatible with USB 2.0 / 1.1. (Note: actual rate will depend on the capability of your device.).
  • UASP FUNCTION - Provides faster transfers up to 70% faster read speeds and 40% faster write speeds over traditional USB 3.0..
  • PACKAGE INCLUDES - 1 x USB 3.0 to SATA hard drive adapter.
  • 1 x2.6ft USB 3.0 Micro B Male to A & C Male Cable.
Check Stock

JESOT M.2 to USB Adapter, B Key M.2 SSD to USB 3.0 Reader Card, NGFF SATA Converter Support SATA Based SDD 2230 2242 2260 2280 No Cable Needed

  • [Efficient] - This M.2 USB adapter can used as a portable flash drive or external hard drive for cloning or retrieving data, not cable needed.
  • [High Performance] - The M.2 drive adapter comes with a 5Gbps USB3.0 1153E chip, can retrieve and backup data in high-speed.
  • [Applicable SSD Hard Drive] - Input Interface: ONLY support for SATA Based B Key and B+M Key SSD, DO NOT support any PCIe NVMe based SSD. Output Interface: support for USB 3.0 and downward compatible with USB 2.0.
  • [Support System] - The M.2 SSD SATA adapter compatible with Window 2000/ 2003/ XP/ Vista /7 /8, Linux OS, Chrome OS and Mac OS. Supports for 2230 / 2242 / 2260 / 2280 SATA port NGFF SSD.
  • [Hot Swap] - The USB to 2280 M.2 SSD drive adapter without enclosure cover, can help fast heat dissipation. Plug and play, can realize full potential of high performance.
Check Stock

WAVLINK USB3.0 to SATA 3 Hard Drive Cable Adapter, SATA to USB A 5Gbps Adapter Cable, External Hard Drive Connector Converter to USB for 2.5 inch 3.5 inch HDD SSD Data - Not Include Power Adapter

  • ...10, 8, 8.1, 7, Vista, XP or above, Mac OS 9, 10, 11 or later, Linux, Chrome os etc.It fits with most 2.5" SATA III / II / I HDD & SSD and 3.5" HDD up to 18TB, compatible with your USB-A equipped devices including laptop, tablet, desktop, HDTV, router. Making sure that your phone support OTG function.【 Extra power adapter[12V/2A ] required for 3.5" HDD(Not included)】..
  • Humanization Design: The blue LED indicator lets you know the working status. The adapter with the function of 3 minutes auto sleep with no operation, which can greatly reducing the invalid energy consumption, prolonging the service life of the hard disk and protect the hard drive data for you. The S.M.A.R.T function allows you to monitor the status of your HDD or SSD on computer and the PVC materials will enhance the durability. Lightweight design makes it a portable solution while on the go..
  • 5Gbps with UASP Accelerated: Supports data transfer up to 5 Gbps, backward compatible with USB 2.0 / 1.1. This SATA to USB3.0 adapter supports UASP technology, it performs 70% faster at reading and 40% faster at writing than conventional USB 3.0 when connected to a computer that also supports UASP. 【Note: the actual rate will depend on the capability of your device.】.
Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

  • ✔ Please use this high quality certified DC 5V 4A power supply(ASIN :B07413Q5Y4).Power supply request: 5Vdc +/-5% , 4A.
  • The power adapter not only powers Raspberry Pi board but also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
  • ✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
  • For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
  • ✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
  • User manual, pls refer to Geekworm WiKi search(X820)..
  • ✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
  • Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices,....
Check Stock

USB to SATA IDE HDD Adapter - USB 3.0 Cable to 2.5" 3.5" SATA IDE Hard Drive Converter for Windows 10/8/ 7/XP, Mac, Internal to External Laptop SSD Reader Kit, File Data Transfer Conversion Cord

  • UNIVERSAL USB to SATA/ IDE ADAPTER -- Our USB to SATA IDE HDD adapter is designed for 2.5"/ 3.5" SATA HDD/ SDD, 2.5"/ 3.5" IDE HDD hard drive, supporting DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW, compatible with windows 7,8,10, vista, XP.
  • ACCESS TO 3 DRIVES SIMULTANEOUSLY -- plug & play, no driver needed. This converter allows you to connect 2.5” 3.5” IDE & SATA hard drives to your computer via USB port. Perfect for duplicate, backup or transfer data from the hard drives to another one. It has a SATA II connector and two IDE connectors (40pin and 44pin)..
  • FAST & RELIABLE TRANSFER RATE -- With USB 3.0 interface, high speed transfer rate up to 5Gbps. Supports 2.5 '' 3.5 '' SATA , IDE up to 5TB. The IDE Converter is also backwards compatible with USB 2.0 / 1.1..
  • PORTABLE DESIGN -- This USB to SATA IDE HDD adapter is so portable that you can tuck it away in a laptop bag, letting you accessing old and new hard drives anywhere..
  • POWER ADAPTER SUPPLIED -- Including a 12V DC power adapter ensures 2.5"/3.5....
Check Stock

SATA to USB 3.0 Adapter AkoaDa Durable Nylon Braid USB to Sata Adapter Hard Drive Adapter Portable Cable Support for SSD Data Transfer Grey

  • Portablely Usage : The sata to usb 3.0 adapter allows you to connect a 2.5" SATA SSD HDD with your computer,Add drive space to your laptop.Connect to....
  • Fast speeds transfer : This sata to usb 3.0 adapter supports USB 3.0 data transfer speeds of 5Gbps.When connected to a computer that supports UASP,....
  • Plug and Play : Quickly recognitiona SATA SSD, no need to install the drive and No external power supply required.plug in the hard disk to read....
  • Wide Compatibility : sata to usb 3.0 adapter is compatible with PS4, Xbox, Windows 10/8.1/8/7/Vista/XP, Mac OS Supports 2.5 '' SATA SSD.
  • What You Get : We provide this USB 3.0 to SATA III Hard Drive Adapter Cable with 24/7 customer service, if you have any questions,we will resolve your....
Check Stock

Generic SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for 2.5/3.5 Inch Hard Drive/5 inch Optical Drive with External AC Power Adapter

  • USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage..
  • Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your SATA / IDE device to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver..
  • Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed..
  • USB 2.0 to IDE/SATA Cable can be easily connected to the IDE device / SATA device and make the hard disk device more portable. Also, it is easy to use and plug & play, no drivers needed..
  • Satisfaction Guarantee: We always want to offer striving hard to provide our customers with best shopping experience. If you are not satisfied for any reason, please do not hesitate to contact us. We will offer you a satisfactory solution. Thank you!.
Check Stock

Wavlink USB 3.0 to SATA Dual Bay External Hard Drive Docking Station for 2.5/3.5 Inch SSD HDD SATAⅠ/Ⅱ/Ⅲ Support 2×10TB 6Gbps &UASP with Offline Clone/Backup Function

  • Supports all 2.5''/ 3.5'' SATA I, SATA II, SATA III HDD SSD, Support 2×10TB hard drivers with UASP protocol,Compatible with Windows,Mac Os,Linux..
  • Super speed USB3.0 interfaces with data transfer rates up to 5Gbps.
  • 10 times faster than the traditional USB 2.0. SATA-III internal.
  • Standalone duplicating / Offline Clone operation with LED indicator, hot-swappable, Tool-free,plug and play, no drivers needed.Offline data copy....
  • Highly efficient (12V, 3A), stable and reliable DC power source guarantees a steady supply of energy.
  • Package Includes: 1x USB 3.0 HDD SATA Docking Station.
Check Stock

AcomData Samba 3.5��� USB 2.0 (PATA-IDE/ SATA) Hard Drive Enclosure Kit, Radiant Red (SMBXXXU2E-RD)

  • DVD/CD-ROM, CD/DVD-RW Optical Drive, you can easily connect your hard drives through a USB port as an additional external hard drive to read& backup data, operate formatting hard drives, and transfer files.
  • HIGH-SPEED TRANSFER UP TO 5GBPS- SATA IDE to USB adapter Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1. It has a dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector, which you can get all your hard drives combo.
  • SUPPORT DRIVE HUGE CAPACITY UP TO 6TB: Designed to be lightweight and compact supports a hard drive capacity of Up to 6TB capacity. SATA to USB 3.0 adapter has a SATA III connector and two IDE connectors (40pin and 44pin). we Provide a 4pin power cable for a 3.5″ IDE drive, Tips: Some IDE hard drive is old, you need to set a jumper to turn on the disk(set the master disk and the slave disk).
  • WIDE COMPATIBILITY: Hard drive adapter support hot-swapping. universally compatible with Windows 10/ 8.1/ 8/ 7/Vista/XP, Mac OS 9/ 10, Linux.
  • work with Xbox, Western Digital, Seagate, Fujitsu, Samsung hard drives, etc. (When connecting two IDE hard drives, please set the master drive and slave drive based).
  • COMES WITH 12V 2A POWER ADAPTER- USB 3.0 to I....
Check Stock