Leecraft RG-1 Zero Clearance Table Saw Insert for Ridgid TS3650 Table Saw

  • Table saw insert supports work right up to the blade for smooth, more precise cuts.
  • Offers superior rigidity, flatness, durability, and low friction.
  • Made from high-density phenolic laminate with a bonded-melamine surface.
  • Includes leveling screws, side and end adjustment screws.
  • precut blade bottom pocket for fully retracted blades and bevel cuts.
  • designed for Rigid table saw with carbide-tipped blades only.
Check Stock

Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746

  • Table saw insert for eWalt DW744 and DW746.
  • Significantly reduces saw noise, dust, chip-out, and splintering.
  • Constructed of high-density phenolic laminate with a bonded-melamine surface.
  • User-friendly with leveling and lateral adjustment screws, rear anti-life pin, and precut blade bottom pocket.
Check Stock

Freud SD208S: 8" Pro Dado Set

  • Specs: Arbor 5/8", Chippers (3)1/8" Chippers,  (3)spacers, Diameter 8", Teeth 12.
  • The set includes 2 blades, 3 chippers, spacers and a shim set for micro adjustability.
  • Ideal for flat bottom grooves ranging in sizes from 1/4" to 7/8" in laminated plywood, melamine and solid wood.
  • optimized blade design for premium performance on all safety brake equipped and underpowered saws including Saw Stop, Jet, Dewalt, Bosch, and more..
  • Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance.
Check Stock

Sili Saw Blade Sleeve • 10 inch Saw Blade Protector • Protects 10 inch Table Saw and Circular Saw Blades

  • If you’re like most DIY’ers or woodworkers, you have a few saw blades laying around your garage or workshop. You could make a saw blade rack out of scrap lumber or maybe stack the blades in a corner exposing your blade cutters to getting chipped. The best solution is to protect your blades by simply slipping a blade into a Sili Saw Blade Sleeve. Once in a sleeve, you can hang your blade up and out of the way! All the while protecting you and your saw blade from harm while its not in use..
  • Made from a softer silicone rubber material, the Sili Saw Blade Sleeve is perfect for protecting your saw blades. While some blades are inexpensive compared to others, why not protect your blades from the daily rigors of job site or workshop use to get the absolute most out of them. The silicone material neatly wraps around the teeth of your saw blade and won’t mark or mar the blade..
  • These are the ideal storage solution for contractors. With each of your blades protected with a Sili Saw Blade Sleeve, you’ll know that when you get to the next job your blades are ready to go! No more changing blades and seeing a chipped tooth or two rendering the blade useless. Not only will the Sili Saw Blade Sleeves save you time, but they’ll save you money by cutting back ....
Check Stock

Metabo HPT Jig Saw, Variable Speed (CJ160V)

  • Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
  • Includes: CJ160V Jig Saw, No. 41 Jig Saw Blade (725389), No. 42 Jig Saw Blade (725379), No. 123X Jig Saw Blade (x10) (725394), Allen Wrench (944458), Splinter Guard (338994), Chip Cover (338996), Dust Collection Adapter, Sub Base, Carrying Case.
  • Auto-mode feature runs the tool at half power and ramps up to full power once a load is detected for easier starts, less vibration and more control.
  • 7. 0 amp motor, intense power for the toughest woodworking jobs.
  • Electronic speed control maintains SPM while cutting.
  • Stroke length of 1-1/32", Ideal for many woodworking applications.
  • Tool-less blade changing system for quick and easy blade replacements.
  • Multi-position switch, to angle blade for beveled cuts.
  • Included Components: Cj160V Jig Saw, No. 41 Jig Saw Blade (725389), No. 42 Jig Saw Blade (725379), No. 123X Jig Saw Blade (X10) (725394), Allen Wrench (944458), Splinter Guard (338994), Chip Cover (338996), Dust Collection Adapter (321591), Sub Base (339018), Carrying Case (339017).
Check Stock

Magic Saw Set Kit, 9 in 1 Hand Saws Woodworking, Multi Tool Blades Universal Hacksaw Kit, Coping Saws for Woodworking, Cutting Wood, Plastic, Glass, Tile, Metal, Rope, PVC Pipe, Rubber

  • Work as magic saw set kit, magic hand saw, magic saw kit, the magic saw, magic handsaw set, magic hand saw set, magic saw multipurpose magic saw.
  • Use as multi purpose magic saw, magic saw blades, magic saw set, magic saw multipurpose, magic saw 6 blade, magic saw multipurpose cutting tool, hand saws woodworking, coping saw blade.
  • Work for whole saw kit, folding camp saw, saw zaw blade, coping saws for woodworking, panel saw kit, hand saw kit, steel chop saw, mitre saw 12 inch, bow saw blade.
  • Use for metal cutting saw blade 14, scroll saw wood, folding saw survival, camping bow saw, bow saw blades, straight flush saw, hole saw kit wood, coping saw blades for wood.
  • Suit for door jamb saw, hacksaw blades for metal, handsaw for metal, hack saw metal, coping saw for wood, hacksaw for metal cutting, metal coping saw blades.
Check Stock

KingTool 3 in 1 Multi Blade Hand Saw - 12-Inch Solid Frame Hacksaw, 14-Inch Universal Handsaw and 10-Inch Standard Utility Saw

  • KingTool 3 in 1 hand saw including 12-Inch solid frame hacksaw blade, 14-Inch universal handsaw blade and 10-Inch standard utility saw blade, and a shared handle for cutting a plastic, metal, pipe, particle board, and wood..
  • The installation is easy and simple, and the saw blade can be installed in 3 seconds at the fastest. Ergonomically designed bi-material handle for comfort and control..
  • Solid Frame Hacksaw - A 24inch teeth Bi-Metal hack saw blade and a 18 teeth hack saw blade are included in this 3 in 1 saw set. Adjustable flush cuts at 90° and 180° angles.
  • Universal Handsaw - A 14”/355mm 7TPI/8TPI universal handsaw blade is included in this 3 in 1 hand saw set..
  • Standard Utility Saw - A 10”/255mm 7TPI/8TPI standard utility saw blade is included in this 3 in 1 hand saw set.Each saw features Tri-Ground teeth to give you fast, efficient cuts.
Check Stock

Saw Blade Bushing Set Saw Blades Adapter Ring Aperture Conversion Gasket , 1Inch to 20mm, 1inch to 5/8Inch, 7/8Inch to 5/8Inch, 20mm to 5/8Inch, 5/8Inch to 1/2inch, 1.25Inch to 7/8Inch, Pack of 12

  • In layman's terms, the inner hole of the saw blade is larger. For saw blade clamping plate and electric saw clamping, the hole is larger, so we need to use washers to reduce the diameter! Saw blade reducing ring, inner hole switching ring, saw blade inner hole switching reducing ring, it is convenient to use with saw blade splint, electric grinder and electric saw..
  • Main specifications: Outer diameter-inner diameter 5/8Inch to 1/2inch, 0.78Inch to 5/8Inch, 7/8Inch to 5/8Inch, 1inch to 5/8Inch, 1.25Inch to 7/8Inch, 1Inch to 0.78Inch. Washer thickness: about 1.2-1.3mm, the washer should be the same thickness as the saw board of the saw blade, or a little thinner for more stability..
  • Usage description: adapters to mount brush cutter blade to echo trimmer. These did the trick to center the blade to the trimmer. Used for adjustment and conversion of alloy saw blades and other mounting holes becoming smaller. It is suitable for saw blade/marble blade inner hole conversion, angle grinder and cutting machine..
  • 12pcs Saw Blade Bush / Spacer, Saw Blade Bushing Washers, There are two pieces of each size, Total of 12 pieces.
  • VIP after-sales service guarantee: fast refund and exchange. Professional delivery facilities and professional delivery personnel will prevent ....
Check Stock

IRWIN 10-Inch Miter Saw Blade, Classic Series, Steel Table (11870)

  • Precision-ground circular saw teeth for smooth, accurate cuts.
  • Fully-hardened circular saw blade plate runs truer, longer.
  • Heavy-gauge, high-carbon steel construction provides extended circular saw blade life.
  • 10" blade length with 5/8" arbor and 0.09" kerf.
Check Stock

IRWIN 10-Inch Circular Saw Blade, Carbide, 40-Tooth (15270)

  • Corrosion-resistant coating on the circular saw blade helps prevent rusting.
  • Precision-ground, carbide-tipped teeth let each circular saw blade make smooth, accurate cuts.
  • Circular saw blades are designed for wood cutting.
  • 16° hook angle with 40 teeth and ATB grind.
  • 10" blade length with 5/8" diamond arbor and 0.102" kerf.
Check Stock

IRWIN Tools Metal-Cutting Circular Saw Blade, 7 1/4-inch, 48T (4935555)

  • Laser-cut saw blades and anti-vibration vents keep the blade cool for smooth and accurate cuts.
  • Metal cutting-grade carbide saw blade teeth withstand impact, reduce wear and deliver longer life.
  • Circular saw blade is designed for cutting ferrous steel or thin steel.
Check Stock

Megacast CURVED JEWELERS SAW FRAME with 144 ASSORTED JEWELERS SAW BLADES

  • Material: The saw blades are made of durable high-quality steel which is known for its hardness and wear resistance. The jeweler saw with black comfortable hard rubber handle with Adjustable for various blade lengths..
  • Design: Unlike the classic saws, this jeweler saw has a unique curved design that requires less strength and pressure, ensuring a clean edge with each cut. The handle is made from rubber, which is lightweight and ergonomic for time and labor saving.
  • Function: A jeweler's saw frame has a top and bottom wing screw for securing blades (thumbscrews that firmly secure the blades into the frame) and a blade length adjustment for ensuring the proper blade tension. A blade is added to the saw frame for intricate cutting. These Blade sharp edge pointing on downside and then tighten with a both wing screw..
  • Muti-Sizes & Measurement: This jewelers mini saw frame with 144 assorted jewelers saw blades. This saw allows you to work with various blades. Frame Length - 4-1/4” & Depth of Cut: Up to 4.25”. Blade Sizes - 4/0,3/0, 2/0, 1, 2..
Check Stock

Jones Stephens S49005 E-Z Stroke Pipe Saw 8” Pipe Saw

  • Hand Saw: This E-Z Stroke Pipe Saw is a convenient, lightweight hand saw with a comfortable ergonomic handle. It can easily be used to cut plastic,....
  • Pull-Stroke Saw: Jones Stephens’ E-Z Stroke Pipe Saw is one of the most convenient and easy-to-use cutting saws. With razor sharp teeth, the....
  • Flexible Blade: The saw features a highly flexible blade that allows for flush cutting without marring adjacent surfaces..
  • Razor Sharp Teeth: The tri-edge ground teeth cut through material like a knife, which makes this saw the go-to for all your cutting needs..
  • Replaceable Blade: If you need a smaller blade or your blade is dull or damaged, the orange handle accepts all Jones Stephens E-Z Stroke Saw blades.....
Check Stock