Categories

Best Sawdust Collector

Table Saw Dust Collector Bag for Bosch/Rigid/Ryobi/DeWalt/Kobalt/Skilsaw/Craftsman/Porter/Cable/Delta/Makita/Metabo 10 TableSaws | Universal 2.5 inch Dust Port 1 Pack

  • 【Table saw dust bag 】 : effective at keeping your work area clear of debris. this table saw dust bag is designed for use with the bosch 4000,....
  • 【Sawdust collector bag】: fits various 10 inch table saws with 2.5 inch dust ports ! Suitable for many different brands, compatible with Bosch....
  • 【size】:The dimensions of the dust bag are L 29.5" x W 9.8",Interface position W 13", The ring dimension is 2.5" and can go up to 2 7/8"..
  • 【High quality】:The sawdust dust bag is made of high-quality fabric, has a metal wire frame support and a convenient zipper opening at the bottom,....
  • 【Easy to Use】:Table saw bag is easy to attach and detach to your table saw. Simply squeeze the spring clamp and slide clamp over tabs on dust port....
Check Stock

Abestorm 2-Stage Filtration Air Filtration System for Woodworking, Hanging Air Filtration Dust Collection for Woodworking/Garage/Workshop, DecDust 500 (350/450/500 CFM)

  • ...tting from up to 26 feet away, easily switch between various airflow speeds of 350CFM, 450CFM, 500 CFM depending on what the situation calls for. Item Size: 20.7 x 17 x 11 in. Weight: 25.5lb..
  • ✔ [Two Filtration Devices, Easily Replaced Filters] - The air filter dust collector with primary filter captures 98% of 5-micron particles, inner efficiency filter bag captures 87% of 1-micron particles, effectively enhance the effect of air purification and deal with partides, dust, sawdust, pet sawdust, and so on. An ingenious buckle structure is designed on both sides of the filter, which is convenient for users to change the filter. .
  • ✔ [Timer Setting, Ideal for Woodworking Air Purification] - This air filtration dust collection for woodworking has remote built-in timer with 1H/2H/3H/4H/5H/6H settings, shut off automatically at the end of the designated time, cleaning the air even while you are away from your woodwork shop. Overload protector built-in also make it automatically shut off, safe to use..
  • ✔ [Hanging Air Filter for Workshop, Easy to Install and Use] - Plug and play, this compact air filtration system can be....
Check Stock

Premium Hedgehog Push Block for Table Saws and Router Tables

  • 【Compatible with】 Replacement for Bosch /Dewalt /Makita /Ryobi/ Craftsman /Porter Cable/ RIGID/ Metabo/ Kobalt/ Skilsaw/ Delta 10 inch tablesaws, and other table saws that have 2-1/2 inch dust ports on the exterior of the saw..
  • 【Effective Dust Collection】Effective at keeping your work area clear of debris. Provides up to 70% of dust collection..
  • 【Easy to Use】Easy to attach and detach to your table saw. Simply squeeze the spring clamp and slide clamp over tabs on dust port and release spring clamp. The dust bag requires emptying when full of sawdust..
  • 【Package Contents】Pack of 2 miter saw dust bag in vacuum & dust collector accessories..
  • 【After Buying Service】: We are pleasured to help you.Please note that we are always here to help. Please contact us through Amazon if you have any questions or inquiries..
Check Stock

POWERTEC 70103 21-Inch Floor Sweep Dust Collector – Floor Mounted Blast Gate Attachment

  • INCLUDES: (1) Dust Collection Floor Sweep.
  • FUNCTION: Part of our shop dust collection fittings series, this sweeper is an excellent add-on accessory to help gather workshop sawdust and clean up floor messes.
  • COMPATIBILITY: Works in conjunction with 4 inch blast gates for dust collector systems (please note: This floor sweep will not connect directly to a blast gate. A flex cuff or union is required)– This stationary mounted floor cleaning tool attaches easily to the floor with double-sided tape.
  • PREMIUM BUILD: Made with impact resistant, heavy duty ABS plastic material ideal for the wear & tear commonly associated with collecting workshop saw dust, wood fiber and other abrasives.
  • DIMENSIONS: Overall size: 24-Inch width by 3 1/2-Inch height by 7-Inch | Flange is 3/4-Inch wide | Thickness: 3/32-Inch | Outlet diameter: 4-Inch OD | Weight: 6. 2 oz.
Check Stock

Cocktail Smoker - Old Fashioned Chimney Drink Smoked Set for Cocktails,Wine, Whiskey, & Bourbon - Smoking Glass Cloche Accessories

  • Smoked Cocktail Set: 1 smoked cocktail wooden lid, 3 small filters, 4 boxes of different natural fruit wood smoked sawdust, 1 small cleaning brush..
  • Size: The bottom of the smoked cocktail wooden lid is round, 4.13 inches in diameter, suitable for any glass..
  • Material: Smoky Whiskey Cocktail Wood Lid is made of durable beech wood, which can be perfectly matched with any cocktail, whiskey or bourbon..
  • Natural Fruit Wood Smoked Sawdust: Apple sawdust, Hickory sawdust, Cherry sawdust, Oak sawdust..
  • 100% Satisfied Guarantee: If you have any questions or need any assist, don't hesitate to contact us. We will reply you within 24 hours! What are you waiting for? Add it to the shopping cart!.
Check Stock

4 Inch x 10 Feet Dust Collection Hose - Flexible Clear PVC Heavy Duty Puncture Resistant Dust Debris Fume Hoses - Reinforced With Coated Wire Helix

  • 4'' x 10' puncture resistant, heavy-duty hose (no collapse, tear or kink), Includes 2 stainless steel key hose clamps.
  • Ultra-flexible tight bending radius to easily outfit your workshop woodworking studio with a dust collector system.
  • Transparent walls to easily spot obstructions in your vacuum dust collectors system, great for sawdust powder, debris and ventilation.
  • Universal reinforced duct hose is wrapped around PVC coated high carbon steel wire helix, easy to ground if desired.
  • 100% Satisfaction guaranteed - 30-day no questions return policy + 12-month warranty.
Check Stock

2.5 Inch x 10 Feet Dust Collection Hose - Flexible Clear PVC Heavy Duty Puncture Resistant Dust Debris Fume Hoses - Reinforced With Coated Wire Helix

  • 2 - 1/2 '' x 10' puncture resistant, heavy-duty hose (no collapse, tear or kink), Includes 2 stainless steel key hose clamps.
  • Ultra-flexible tight bending radius to easily outfit your workshop woodworking studio with a dust collector system.
  • Transparent walls to easily spot obstructions in your vacuum dust collectors system, great for sawdust powder, debris and ventilation.
  • Universal reinforced duct hose is wrapped around PVC coated high carbon steel wire helix, easy to ground if desired.
  • 100% Satisfaction guaranteed - 30-day return policy + 12-month warranty.
Check Stock

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

  • ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools.
  • Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories.
  • Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup.
  • PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment).
  • 10-foot (3m) long vacuum hose for ample room to reach your equipment.
  • Small diameter for flexibility and maneuverability.
  • LET THE MAGIC HAPPEN: Included fittings screw into each end of the shop vacuum hose and fit snugly with the fittings on your existing power tools.
  • The small end of the dust collection pipe is ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collect....
Check Stock

POWERTEC 70122 Big Gulp Dust Hood for Woodworking Dust Collection Dust Hood

  • INCLUDES: (1) Plastic Dust Hood featuring a Big Gulp 13” x 16” opening.
  • APPLICATIONS: This catch all attachment collects a wide range of saw dust, debris and woodchips for an assortment of machines, including belt sanders, miter saws, table saws, lathes, drill press and planers without hoods.
  • BUILD: Made with premium ABS plastic, this dust collector accessory is lightweight yet durable, anti-corrosive for in and outdoor usage, and offers high impact resistance for day-to-day wear & tear.
  • COMPATIBILITY: 4-inch OD port accommodates and connects to any 4” ID dust collection system hose or pipe.
  • VERSATILE: Completely portable and can be placed behind or underneath your machine, on a workshop table close to the source, or wherever dust is being produced.
  • 4-Inch nominal end measures 3-31/32-Inch O.D. and 3-47/64-Inch I.D..
Check Stock

POWERTEC 70299 Dust Collection Cyclone Separator Lid for 5 Gallon Dust Collector Bucket Canister w/ 2-1/2 Inch Hose Ports, Elbow Fittings

  • INCLUDES: (1) Dust Separator Lid and (1) 2-1/2” OD 90 degree elbow.
  • FUNCTION: Converts your single stage dust collector into a two-stage unit when used in conjunction with 5 gallon bucket/ common trash can - Collects large workshop sawdust, drywall dust, concrete dust, wood chips and heavier shavings before they reach your impeller and collection bags.
  • FEATURES: An impressively high-caliber seal with foam gasket and increased cyclonic airflow efficiency with elbow friction fitted underneath the inlet side.
  • COMPATIBILITY: Lid inlet and outlet ports accept 2-1/2” ID hose and fits 5 gallon buckets with maximum diameter of 11-3/4".
  • PREMIUM BUILD: Made with high quality ABS plastic - possessing long term durability, impact resistance and shock absorbance made to withstand the abrasive nature of dust collection.
Check Stock

POWERTEC 71009 Safety Push Block and Stick Set | 5 Pack | Ergonomic Handles with Max Grip | Push blocks and Sticks for Table Saw, Jointers and Woodworking | for Woodworker Safety & Control

  • 【Table saw dust bag 】 : effective at keeping your work area clear of debris. this table saw dust bag is designed for use with the bosch 4000, 4100, GTS1031, and GTS1041A table saws. It also can be used with other table saws that have 2-1/2 inch dust ports on the exterior of the saw..
  • 【Sawdust collector bag】: fits various 10 inch table saws with 2.5 inch dust ports ! Suitable for many different brands, compatible with Bosch Dewalt Makita Ryobi Ridgid Craftsman Porter Cable Rigid Metabo Kobalt Skilsaw Delta. Replaces Bosch part TS1004.
  • 【size】:The dimensions of the dust bag are L 29.5" x W 9.8.
Check Stock

Cyclone Dust Collector 2.0” DIY Dust Separator Extractor with 2 Filters, Shop Dust Collector Accessories Cyclone Vacuum Cleaner Filter, for Woodworking, Ash, Metal Shavings, Grain etc

  • DIAMETER 2.0”: 2″ OD inlet (connects to your tools) and 2″ OD outlet (connects to your collector). If the size of the hose is too small, you can heat the hose and then put it on the diameter of the dust collector. The diameter of the air inlet and outlet of our dust collector is 2.0”, if you are 1.25”, 1.5”, 2.5” or other caliber vacuum cleaners, you can buy a caliber converter yourself. Total dimensions are approx. 30 cm (H) x 14cm (W). Very compact and space-saving..
  • FILTER : No. 1 filter element: Through Hole (For woodworking sawdust, dust, etc.), filter element with large holes at the bottom, No. 2 filter element: Blind Hole (Only for ash), filter element without large holes (need to be equipped with a motor above 1200W). Only applicable to ash, such as: stove ash, grass ash and other burning residues (To avoid blockage, remember not to use it in other scenarios)..
  • SUITABLE for STURDY BUCKET: Because our product has a good seal, we hope you can notice that when the vacuum cleaner is sealed with the bucket, the suction will be very strong, thinner barrels are relatively difficult to withstand strong suction, so it is more prone to the deformation of the bucket. In this case, it is only necessary to replace the bucket with a strong....
Check Stock

LANMU Table Saw Dust Collector Bag Compatible with Bosch/Dewalt/Ryobi/Craftsman/RIGID/Delta/Porter Cable/Makita/Metabo/Kobalt/Skilsaw 10\ Tablesaws with 2.5\ Dust Port

  • Compatibility: Compatible with Bosch /Dewalt /Makita /Ryobi/ Craftsman /Porter Cable/ RIGID/ Metabo/ Kobalt/ Skilsaw/ Delta 10 inch tablesaws, and other table saws that have 2-1/2 inch dust ports on the exterior of the saw..
  • Premium Quality: Made of high-quality cloth with wire support frame, lightweight design, durable and dependable. Replaces part TS1004..
  • Easy to Use: Easy to attach and detach to your table saw. Simply squeeze the spring clamp and slide clamp over tabs on dust port and release spring clamp. The dust bag requires emptying when full of sawdust..
  • Table Saw Dust Collector Bag: Effective at keeping your work area clear of debris. Provides up to 70% of dust collection. Easy to empty..
  • Warranty: LANMU provides 1-year warranty and friendly after-sale service, makes sure the risk-free shopping for you..
Check Stock