Categories

Best Saws Holesaws Hss

MaxTool 7/16\ HEX Arbor/Mandrel 5/8-18UNF Thread 1/4\x4\ M2 Pilot Drills Fits 1-3/16\ up SAWS; BA28H1809-M45PN9

  • Standard Arbor with 5/8-18UNF thread fits to hole saws larger than 1-3/16-Inch in diameter.
  • Tool-free release collar to prevent hole saws from locking to the mandrel.
  • Includes 1/4"x4" Overall Length HSS M2 Fully Ground Pilot Drill Bits.
  • Set screw in the body for replacing Pilot Drills.
  • Quality tool steel with precision heat treatment.
Check Stock

COMOWARE Drill Bit Set, 246 Pcs Drill Bits, Drill Bit Sets for Cordless Drill, Drill Driver Bit Set for Wood, Metal, Masonry, Cement and Screwdriver Bits Set Combo Kit

  • screwdriver bits, 30 x 2" screwdriver bits, 6 x nut drivers and 2 x hex keys. Twist drill bit set: 57 x HSS titanium drill bits, 30 x HSS black oxide twist drill bits, 21 x masonry drill bits, 4 x drill stoppers, 17 x brad point drill bits, 4 x spade drill bits, 1 x extension bit. Other accessories: 4 x hole saws, 1 x arbor adapter for hole saws, 1 x countersink, 1 x nail punch, 1 x bit holder..
  • 【WARRANTY & GIFT IDEA】- We will gladly send you the replacement set if you are unhappy with any parts of this kit. The titanium drill bit set, brad point drill bit set, masonry drill bit set, spade drill bit set, hole saw kit and screwdriver bit set are sold separately in COMOWARE, which can be the good replacement or supplement to your toolbox. This drill driver bit kit combines the versatility and practicality that homeowners would appreciate. It is a nice gift-giving option as well..
Check Stock

MaxTool 7/16' HEX Quick Change Arbor/Mandrel 5/8-18UNF Thread 1/4'x3-1/16' Pilot Drill Fits 1-3/16' up Saws; BA28H1809PP

  • Standard Arbor with 5/8-18UNF thread fits to hole saws larger than 1-3/16-Inch in diameter.
  • Tool-free quick-release collar to prevent hole saws from locking to the mandrel.
  • 2-Pin drive positive lock Includes 1/4"x3-1/16" Overall Length HSS M2 Fully Ground Pilot Drill Bits.
  • Set screw in the body for replacing Pilot Drills.
  • Quality tool steel with precision heat treatment.
Check Stock

Amazon Brand - Denali T-Shank Jig Saw Blade for Wood and Metal (6T, 10T, 12T, 21T), 10-Pieces

  • 10-piece jig saw blade set for serious DIYers, hobbyists, contractors, and light tradesmen.
  • Includes (2) each: 12T HSS, 21T HSS, 6T CRV, 10T CRV, and 12T CRV blades.
  • Suitable for general woodworking projects and thin metals (ferrous and non-ferrous).
  • High-speed steel construction provides long life and reliable metal-cutting performance.
  • T-shank design delivers maximum grip and stability.
  • no need to set screw in mounting hole to minimize breakage.
  • Compatible with over 90% of current jig saws, like Bosch, Craftsman, DEWALT, Hitachi, Makita, Metabo, Milwaukee and more.
  • This product is covered by the Accessories 1-year Limited Warranty.
Check Stock

FOXBC 93-Inch X 3/4-Inch X 10/14 TPI Bandsaw Blades for Metal Cutting

  • 93-Inch x 3/4" X 0.035 X 10/14 TPI Band saw Blades for Metal Cutting.
  • Fits all band saws requiring a 93" long 3/4" wide blade.
  • Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic.
  • Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects..
  • Perfect Fit for WEN, DeWalt, Makita, Grizzly, Bosch, POWERTEC , Shop Fox, SKIL, RIKON, Sears Craftsman, BILT HARD, Delta, Ryobi, Milwaukee band saws requiring a 93" long 3/4" wide blade.
  • Bi-Metal HSS M42 grade, 8% Cobalt Content For Added Durability & Wear.
  • Unique welding technique :strong and smoother welding point.
Check Stock

FOXBC 64-1/2 Inch Bandsaw Blades, 64-1/2-Inch X 1/2\ X 14/18 TPI for Metal Cutting

  • 64-1/2-Inch x 1/2" X 0.025 X 14/18 TPI Band Saw Blades for Metal Cutting.
  • Perfect Fit for WEN, DeWalt, Makita, Grizzly, Bosch, POWERTEC , Shop Fox, SKIL, RIKON, Sears Craftsman, BILT HARD, Delta, Ryobi, Milwaukee band saws requiring a 64-1/2" long 1/2" wide blade.
  • Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects..
  • Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic.
  • Fits all band saws requiring a 64-1/2" long 1/2" wide blade.
  • Bi-Metal HSS M42 grade, 8% Cobalt Content For Added Durability & Wear.
  • Unique welding technique :strong and smoother welding point.
Check Stock

Luomorgo 75mm/3 inch Hole Saw, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength and stronger wear resistance..
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade..
  • Widely Used: Hole saws can cut 3 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
  • 100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a 100% satisfied shopping experience..
Check Stock

Luomorgo 100mm/4" Hole Saw, 1.4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength and stronger wear resistance..
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade..
  • Widely Used: Hole saws can cut 4 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
  • Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a satisfied shopping experience..
Check Stock

FOXBC 62\ x 1/2\ x 14 TPI Band Saw Blade Fits Craftsman, Delta, POWERTEC, Ryobi, Wen, Skil 9\ Bandsaw Metal Cutting

  • 62-Inch x 1/2" X 0.025 X 14 TPI Band Saw Blades for Metal Cutting.
  • Fits all band saws requiring a 62" long 1/2" wide blade.
  • Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic.
  • Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects..
  • Perfect Fit for WEN, DeWalt, Makita, Grizzly, Bosch, POWERTEC , Shop Fox, SKIL, RIKON, Sears Craftsman, BILT HARD, Delta, Ryobi, Milwaukee band saws requiring 62" long 1/2" wide blade.
  • Bi-Metal HSS M42 grade, 8% Cobalt Content For Added Durability & Wear.
  • Unique welding technique :strong and smoother welding point.
Check Stock

Hole Saw 6 1/8” (155mm) for Wood, HSS Bi-Metal Hole Cutter with Pilot Drill Bit for Plywood, Cornhole, Ceiling and Drywall

  • ⚙️【HOLE CUTTER】The HSS hole saws are perfect cutting tools for installing recessed light into ceiling, for punching a big hole at wall to fit a vent pipe or an extract fan，and also for cable installation..
  • ⚙️【SHARP TEETH】The bi-metallic cutting teeth is layered with high speed steel, that increases their hardness and durability, and gives the hole saw excellent cutting ability to punch a clean hole..
  • ⚙️【ACCURATE CUTTING】 The increased hardness of the carbide technology and optimized tooth geometry allow our hole saw to provide faster and accurate cutting than standard hole saws, the diameter errors of the cut hole are less than a millimeter..
  • ⚙️【MORE EFFICIENCY】The slug holes around the saw are able to remove the wood chips while cutting, reduce friction heat, improve the efficiency. And the due to the fact that less of total amount of material is actually cut, much less power is required, longer battery life of power tools is benefited..
  • ⚙️【TRUST to PURCHASE】 Provide 60 days free return and replace service to make sure our customers’ sat....
Check Stock

Luomorgo 4.5 inch Hole Saw 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting....
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design....
  • Widely Used: Hole saws can cut 4-1 / 2 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In....
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a....
  • 100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want....
Check Stock

Blue Boar Master Plumbers Kit-12 Sizes Mega Tungsten Carbide 2-1/4” Hole Saws. Cut 10x Faster, 3x Larger, 40x More Holes Using Cordless Drills. For Plywood, MDF, Particle Board, Hardie Board.

  • 12 Carbide Hole Saws: 3/4", 7/8", 1-1/8",1-3/8",1-1/2",1-3/4",2-1/4", 2-5/8", 3", 3-1/2", 4", 4-1/2".
  • One 5/8"-18 arbor with 7/16" shank, 1/2"-20 adapter, hex wrench.
  • NOT NAIL RESISTANT - 3 pilot bits (HSS twist, Carbide Masonry, Tungsten Carbide Tipped for woods).
  • 2-1/4" cutting depth best when USED with 18v Cordless Drill set on SCREW SETTING.
  • ****NOT for use with 1/2" stud drills such as Milwaukee Hole Hawg which will rip the teeth off ****.
Check Stock

Dewalt DT7926-XJ Metal drill bit-Set (29 Piece) HSS-G

  • Small, compact and Durable, with this Wellcut pack, you get a lot of everything..
  • From Holesaws, drill bits for 3 types of material to countersink bits..
  • All encased in a robust shell with Click-Lock System..
Check Stock