Categories

Best Sbus To Pwm Decoder

HGLRC Forward FD413-VTX F4 FC Flight Controller Stack 13A Blheli_S 4 in 1 ESC 400mW for Mirco Racing Drone Quadcopter

  • Tiny size but powerful Integrated body New style 16X16mm , Exclusive Flight stack which design for micro racing drone , ultra tiny and light weight great choice for FPV racer . It integrated F411 Flight Controller Board and 13A BLHeli_S 2S 3S 4S 4in 1 Electronic Speed Controller.
  • High-end quality F411 flight controller F4 Flight Controller Board , 32bit STM32F411 Chip , support dual 8K , Betaflight has a more powerful MPU6000-SPI operating at a higher frequency , making everything run smoothly ..
  • Power switchable PIT/25mW/100mW/200mW/400mW Switchable Transmission VTX via Betaflight Flight Control Board.
  • FD13A 4in1 ESCForward FD13A 4-in-1 ESC , 2S 3S 4S ESC speed controller , constant current 13A.
  • Support SBUS/PPM/DSMX/iBUS receiver , keep the stability and flying ,Support Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, MultiShot,PWM.
Check Stock

Radiolink R9DS 10 Channels 2.4GHz RC Receiver SBUS/PWM Long Range Control for Transmitter AT9/AT9S/AT9S Pro AT10II/AT10

  • Excellent Anti-interference: with DSSS&FHSS pseudo random algorithm to give R9DS with excellent anti-interference ability..
  • 9/10 Channels: Support PWM/SBUS signal output, works with Radiolink AT9/AT9S/AT9S Pro/AT10/AT10II. Please make sure SYSTEM channel selection is 10ch mode when it works with AT10II 12 channels transmitter, or it won't workwell..
  • Fast Response: High resolution ratio of 4096, the stability of 0.5us, to provide a quicker, low-latency connection for the driver..
  • Long Range Control: outstanding control range up to 2.1 miles on air. (Depends on the actual using environment).
  • Quick to Bind and Anti-polarity Protection: no need any setting on transmitter when R9DS bind with radio. With reverse polarity protection circuit, not damage the receiver even you plug wrong polarity..
Check Stock

Analog Voltage to PWM Signal Converter, 0-5V/0-10V Analog Input Voltage to 0-100% PWM Signal 2KHZ-20KHZ Converter Module,for PWM Motor Speed Control Interface Circuit Activity

  • Voltage to PWM Signal Converter Module: This module can convert 0-5V or 0-10V analog input voltage into 0-100% PWM signal..
  • Wide Application: This module is widely used for PWM motor speed control interface circuit, instrumentation AD interface conversion, and other applications that need convert voltage to PWM signal..
  • PWM Signal Frequency Range: The PWM signal frequency range is 2KHZ-20KHZ, maximum is 20KHZ, default minimum is 2KHZ,Hyuduo is committed to providing customers with high-quality products and thoughtful service..
  • Setable Output Frequency: The default function of this module is converting 0-10V into 0-100% 2KHZ PWM signal, but the output frequency can be set by adjusting potentiometer as needed,stable and reliable performance, practical, easy to operate and use, has a long service life..
  • Two Kinds of PWM Signal: There are two kinds of PWM signal, PNP-PWM output and NPN-PWM output. The PNP-PWM output is only 5V level, NPN-PWM output is 5V and 24V level,If you have any problem,please contact us, we will strive to provide you with satisfactory service!.
Check Stock

PC Interface Controller

  • 【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
  • Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
  • Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
  • (current greater than 100mA)，PWM signal receiving frequency range: 1KHZ-3KHZ.
  • When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.
Check Stock

EK-CoolStream Classic PE 360 Combo Pack with Free Tape Measure Tool

  • Combo kit comes with: 1 Radiator, 3 RGB fans, 1 fan splitter, 1 radiator gasket AND a FREE Tape Measure Tool!!.
  • EK-Vardar RGB fans is its simplicity as it uses standard 4-pin 12V RGB connectivity.
  • Dimensions: 393 x 120 x 45mm (L x W x H).
  • EK-Cable Y-Splitter 3-Fan PWM is a simple adapter used to hook two DC or PWM fans to one motherboard 4-pin PWM or 3-pin DC FAN connector..
  • Connect three (PWM) fans from one (PWM) fan header.
Check Stock

LRONG 1PC PC Chassis Fan Hub CPU Cooling HUB Fan PWM Hub SATA Controller Speed Controller

  • 12V 10-way 4pin SATA fan hub, to solve the problem of insufficient motherboard fan ports. The hub has 10 fan ports, can support 10 fans, can meet various host requirements, and supports 3pin/4pin fans..
  • Installation steps: The PWM port is connected to the CPU fan port on the motherboard. The red port is dedicated to the CPU fan. Connect 1 fan to the red portand then connect the rest of the fans. Then you need to connect the fan hub’s PWM cable to the motherboard. Connect the SATA cable to the fan hub..
  • Equipped with PWM cable: The hub is equipped with a PWM cable with a length of 40CM, which can support the back line. After the PWM cable is connected to the main board, the temperature control and speed can be controlled by the main board..
  • Convenient installation: the hub is fixed with 3M glue, and the back of each hub is equipped with an American 3M glue, which can make the hub work well.
  • Package content: 1 X 12V 10-channel 4pin fan hub, 1X PWM connection cable..
Check Stock

WSDMAVIS 2Pcs PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Digital Analog Signal Converter for PLC Signal Interface Switching

  • The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.Allowable error:5%..
  • It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM..
  • The modules are small in size and easy to use in different places.Easy to operate, fine tuned by potentiometer..
  • MCU embedded technology.Work Voltage:DC 12V-30V(Power requirements:> 100MA).
  • Select the PWM signal input level range through short-circuit.The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU.
  • The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller..
Check Stock

PWM Fan Extension Cable | PC Cooling Fan Power Extension Cord | Compatible with ATX Case 3 Pin & 4 Pin Cooling Fans | 10.5" Black Durable Nylon Braided Cable (4 Pack)

  • ✔PC FAN EXTENSION CABLE 4 PIN AND 3-PIN✔ Our PWM fan splitter cable for PC motherboard cooling fans are constructed using high-quality nylon and cable is strongly braided to provide long-lasting performance as well as to avoid dust and breakage..
  • ✔CASE FAN EXTENSION CABLE✔ The PWM fan cable is designed with the capability of expanding one motherboard PWM fan header to support internal cooling fans to reduce the load on the motherboard..
  • ✔FAN SPLITTER CABLE WITH MANY FUNCTIONS✔ The 4pin PWM to 3pin standard fan adapter cable provides better power supply for motherboard fans, supports PWM function, speed regulation, and satisfies all your control needs to increase the lifespan of the motherboard..
  • ✔CASE FAN POWER SPLITTER FOR 3-PIN AND 4-PIN✔ The PWM cable extension is mostly compatible with 4-pin and 3-pin PC case motherboard cooling fans.
  • the extension cord ergonomic design offers you a greater flexibility between motherboard and CPU cooling fans..
  • ✔CPU FAN EXTENSION CABLE 3 PIN AND 4-PIN COMPATIBLE✔ The connector types of PWM fan extension cable includes one 4-pin Female plug connector and one 4-pin Male plug connector.
  • it is designed for enthusiasts with need for controlling numerous system fans..
Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

Endlesss PWM Fan Splitter Cable 4 Pin Black Sleeved Case Fan Splitter Cable 1 to 3 Converter Braided Y Splitter Computer PC Fan Extension Power Cable 10.5 Inches (2 Pack)

  • HIGH QUALITY: The fan PWM splitter Y-cable for PC motherboard cooling fans are constructed using high-quality material, measures 10.5 inches in length and cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust and breakage..
  • 2-WAY MOTHERBOARD: The PWM fan cable is designed with a 4-pin female connector on the one end and on the other end it splits into two 3-pin & one 4-pin connector.
  • the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
  • MANY FUNCTIONS: The PWM case fan splitter provides better power supply for motherboard fans, supports PWM function, increases airflow, reduces the accumulation of heat within the frame and satisfies all your control needs to increase the lifespan of the motherboard..
  • For 3-PIN & 4-PIN FAN: The 2-way PC PWM fan splitter power cable is mostly compatible with many brands of 3-pin and 4-pin PC case motherboard cooling fans.
  • this PWM fan splitter hub connects 3 computer case fans to a single motherboard fan header..
  • CPU FAN EXTENSION: The pc fan extension cable 3-pin & 4-pin compatible is designed for enthusiasts with need for controlling numerous system fans..
Check Stock

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

Vetroo A03 Black Mid-Tower ATX Gaming PC Case, Pre-Installed 3X ARGB&PWM Fans, Door Opening Tempered Glass Panel, High Airflow Mesh Front Panel Computer Case Come with Fan Controller Hub

  • Mesh & Tempered Glass Panel: The mesh front panel and top dust filter provide more airflow and cooling, and the hinged transparent tempered glass side panel is easy to remove without any tools..
  • Pre-installed 3pcs ARGB/PWM Fans: The case pre-installed 3pcs 120mm ARGB and PWM fans in the front, which provides your case the great airflow cooling and colorful lights..
  • Controller Equipped: With 5V 3Pin addressable RGB and 12V 4Pin PWM interface, it can be connected to synchronize RGB lighting and PWM of fans. (Note: Only with the white PWM port connected, can other PWM ports sync PWM features.).
  • Better Cooling Airflow: Support up to 6pcs fans at the same time, It also has room for 240mm/360mm water cooler. It provides a great airflow and keeps your case cooling all the time..
  • Sufficient Internal Space: Compatible with ATX, Micro-ATX, Mini-ATX motherboard. This case supports CPU coolers up to 165mm tall and GPU up to 350mm long, you can install GPU horizontally and vertically with a VGA holder, It can support 2Pcs 3.5” HDD and 2Pcs 2.5” SSD drive bays..
  • Cable Management System: 2 wire combs are included behind the motherboard tray to aid in cable management and keep your case more cleaner..
Check Stock