1-1/2" 5-way Cross PVC Fitting Connector

  • The 5 way PVC pipe fittings are commonly used to make center supports when covering a large area with a PVC structure. It is also useful to make bases for sprinklers, dog agility equipment and other stands..
  • All five outlets are non-threaded sockets.
  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
Check Stock

Pipe Décor 1½ in. x 6 in. Black Steel Pipe, Pre-Cut, Industrial Steel Grey Fits Standard 1½ Inch Black Threaded Pipes, Nipples and Fittings, 6 Pack

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

PVC- 4 way L/T 2' (Furniture Grade White)

  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • All four outlets are non-threaded sockets.
  • 2" Fittings fit on 2" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • Furniture Grade means this fitting has a non-marked, glossy finish..
Check Stock

1-1/2" 4-way Tee PVC Fitting Connector

  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • All four outlets are non-threaded sockets.
Check Stock

Nipple, 1 X 6 In

  • Price For: Each Max. Temp.: 140 Degrees F Item: Nipple Material: PVC Color: Gray Schedule: 80 Item: Nipple Pipe Size: 1-1/4" Length: 4" Standards: ASTM D.2467, NSF-14 Certified Connection Type: Threaded Max. Pressure: 160 psi @ 73 Degrees F Country of Origin (subject to change): United States.
Check Stock

NDS WU-1000-S PVC Pipe Fitting, 1-Inch Slip Union, Schedule 40, EPDM O-ring, White

  • Great for high pressure applications: Use for any residential or commercial high-pressure water flow management needs.
  • It is perfect for indoor plumbing, outdoor irrigation and sprinkler systems, and piping for an above ground pool, hot tub, or spa.
  • Easy maintenance option: Unions are great to use when ease of service and maintenance for a pipe or ball valve is a priority.
  • Easier to use than a coupling to connect pipes, elbows, and other fittings.
  • Schedule 40 compliant: The WU-1000-S Slip Union can be used to create joints with schedule 40 pipe.
  • NSF certified: Drinking water safe and low lead approved.
  • Quality Construction: Made in the USA with quality polyone schedule 40 PVC ii material.
Check Stock

Van Enterprises 2\ Bulkhead Tank Fitting Adapter with 2\ SCHEDULE 80 Male Adapter Kit for Rain Barrels, Aquariums, Water Tanks, Ponds

  • 2" uPVC Bulkhead Fitting [NPTxNPT] with 2" SCHEDULE 80 Slip Socket Male Adapter Kit.
  • Locking Nut is REVERSED THREADED. The Best Bulkhead Fitting in its class with THICK PREMIUM silicon seal gasket that will contour to the shape of the round barrels.
  • Premium Grade SCHEDULE 80 2" Male Adapter. UV resistance. Will not fade, crack, or peel. Durable and longer lasting PVC versus standard plastic bulkhead fittings.
  • Flexible Configuration with 2" SCHEDULE 80 Male Adapter that can be Socket x Thread or Thread x Socket.
Check Stock

SharkBite U860O300 Oxygen Barrier PEX Pipe 1/2 Inch, Orange Heat Radi, 300 foot coil

  • PEX RADIANT TUBING: Flexible oxygen barrier pipe tubing for radiant floor and hydronic heating applications.
  • Minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite plumbing fittings or plastic barb and brass barb fittings using PEX crimp tool or clamp connections.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: Manufactured and tested in the USA.
Check Stock

Banjo NIP100-SH Polypropylene Pipe Fitting, Short Nipple, Schedule 80, 1" NPT Male, 2" Length

  • Nipple for connecting two threaded pipes.
  • Male NPT threads for connecting to a female NPT threaded pipe.
  • Precision molded in sterilizable polypropylene for dimensional stability and reinforced with fiberglass for added durability, strength, and chemical resistance.
  • Handles pressures up to 150 psi at 70 degrees F.
  • Schedule 80 polypropylene for a thicker wall than schedule 40.
Check Stock

1CAMO 3-Way Tee PVC Fittings for 1 Inch PVC Pipe, SCH 40, White - 1 Inch PVC Elbow Fittings PVC Pipe Connectors - Build Heavy Duty Furniture with 1 Inch PVC Pipe (4 Pack)

  • HEAVY DUTY PVC FITTINGS: These 1CAMO 3-way elbow PVC fittings are made of durable furniture grade PVC, schedule 40. Furniture-grade means they can withstand heavier weights and have higher manufacturing requirements than ordinary plumbing fittings..
  • PROFESSIONAL PERFORMANCE: Our 3-way tee 90-degree pipe elbow fitting is manufactured with a sleek looking, glossy, white surface with tapered ends allowing for a smooth transition from the pipe to the fitting. Suitable for both indoor and outdoor use..
  • EASY TO INSTALL: These are a quick and handy solution for building any type of structure out of 1” PVC pipe, which requires PVC fittings 1 inch sizing. Each package includes FOUR, 3-way, 1 inch PVC pipe fittings enabling you to create a sturdy corner or elbow joint in projects, structures, and PVC plans!.
  • PERFECT FOR BUILDING PVC FURNITURE: These 3-way, 1 inch PVC pipe fittings are made with the highest quality material allowing for a long service life. You can use these furniture grade PVC fittings to connect PVC pipes and build the DIY projects you want..
  • WIDE APPLICATIONS: These PVC fittings are designed for building PVC furniture and structure out of PVC pipe, such as a PVC structure, greenhouse, tents, shelves, shoe racks, dog enclosure, flower stands, e....
Check Stock

letsFix PVC Pipe 1/2

  • Professional PVC pipe and PVC fittings global suppliers..
  • Furniture-Grade pvc pipe – The “furniture grade” means that it has better performance than traditional plumbing pipes: ① The surface finish is higher and flawless. ②Processed from raw material particles with higher strength, the load bearing capacity and impact resistance are greatly enhanced. ③ Has better sound insulation performance. ④ There is no mark on the surface of the pipe, so that your project looks more professional. ⑤A wide range of applications, both indoor and outdoor..
  • Size Parameters – Length of each: 40″/ The total length of [10 Pack] is 33.33 Feet/ 1/2″ Schedule 40 PVC PIPE/ O.D.= 0.840″/ Wall= 0.109″/ I.D.= 0.602″..
  • Easy to Install – They usually complete the project with 3 way, 4 way, 5 way and various pvc pipe fittings. You can use them to create a pvc world and use your imagination, any project could be achieved..
  • After-sales Service – we have a mature after-sales service system to replace goods or refund unconditionally..
Check Stock

SharkBite 1/2 Inch x 100 Feet White PEX-B, PEX Pipe Flexible Water Tubing for Plumbing, U860W100

  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems.
  • minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections.
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • PEX hose is great for repairs, and easy to cut with SharkBite shears.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA.
Check Stock

SharkBite 1 Inch x 100 Feet Orange PEX Pipe, Oxygen Barrier Flexible Water Tubing for Radiant Heating, U880O100

  • PEX RADIANT TUBING: Flexible oxygen barrier pipe tubing for radiant floor and hydronic heating applications.
  • minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections.
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • PEX hose is great for repairs, and easy to cut with SharkBite shears.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA.
Check Stock