Categories

Best Screen Printing Board

INTBUYING 3 Color Screen Printing Kit T-Shirt Printing Press 4 Station Screen Printing Machine

  • Washout is one of the most important processes during screen printing. Based on the customer and market, our company R&D this washout tank furnished with water tank, automatic pressurizing water spray gun and screen frame clapboard, economical, multifunctional, convenient to use..
  • LED UV Exposure Unit （006854） Exposure size： 21x25 inch Voltage： 110v Power： 160w Note: The maximum external size of your screen frame must be within 25" x 21"x1.5". Machine size： 26x22x9 inch (67x57x23cm) Net weight： 64lb/29kg Gross weight： 79lb/36kg Packing size： 30x27x12.4 inch (77x68x31cm).
  • Height of the flash dryer could be adjusted within 5.5" * The frame & flash dryer can rotate arbitrarily in 180 Degree Features Adjustable double-spring devices are available for screen frames of different weight. Screen clamp could be moved up and down, which is suitable for screen frame within 1.2" (3cm) thickness. All-metal construction, advanced electrostatic spraying and electroplating, durable, easy to clear and no rust..
  • Screen stretching is the most important procedure to make screen. Stretchin....
Check Stock

Tianiuseen Screen Printing Kit 4 Color 2 Station Screen Printer Silk Printing Press Equipment Material Screen Printing Flash Dryer for T-Shirt DIY

  • 【4 COLOR 2 STATION SCREEN PRESS】The Silk Screen Printing Machine is used for 4 color 2 Station T-shirt overprinting.Two stations can be put at 2 angles(90° & 180°).This machine is combination structure, attached with whole set installation tools. The screen frame clamp can be moved up and down, which is suitable for screen frame within 1.2inch(3cm) thickness.THE MACHINE NEEDS TO BE FIXED ON THE TABLE BY SCREWS..
  • 【18 x 24 Inch FLASH DRYER】Baking area reaches 18"x24"(45x60cm).Crate Dimension: 34"x20"x14"(86x51x36cm).1800 Watt Heating Element - It uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area.Rotating and Adjustable Stand.With four universal wheels, easy move. Sturdy design with powder coated housing to prevent rust..
  • 【UV EXPOSURE UNIT】 UV exposure unit exposure area:20"x20", glass size:13.7"x17.7"x0.3", rubber base size:19.7"x23.6", lamp power:26W/pc (total 52W).And it can be adjusted in different heights and angles to satisfy different exposing demands.Equipped with a countdown timer to control the exposure time and switch plug....
Check Stock

4 Color 4 Station Silk Screen Printing Press Machine Screen Printer Heavy Duty DIY

  • 4 Color 4 Station Screen Printing Press. You can print onto clothing, woven fabric, metal, paper, copybook, plastic, circuit board, wood, glass, ceramic tile, leather and other plane printing substrates, which is especially suitable for small businesses and individual printing shop..
  • For skillful operator, two person could print 30-50 pieces 4 color T-shirt in one hour..
  • This press come with bracket. It is very easy to intsall and adjust the platen. Each screen frame’s fixing device is equipped with precise positioning wheel, when the positioning iron on the arm placed in positioning wheel closely, it can ensure the printing result precision . The screen layer and the pallet can rotate independently, which makes it easier for multi-color printing..
  • This machine is manual color matching printer, only need to adjust one pallet. If one of the printer arm has finished adjusting, other corresponding position will be settle down..
  • Screen clamp could be moved up and down within 2"/ 5cmm Net weight:160lb/ 72.5kg Gross weight: 177lb/ 80.5kg The dimensions will be 74*74*43inch when fully assembled..
Check Stock

Design Master DM-HDF-169 Home Decor Finish Aerosol Spray, 11-Ounce, Clear Matte

  • 【Chalk Paint Application】JAJADO chalk paste paint for silk screen stencils, screen printing Ink paint is a great way to add a chalk finish design onto your chalkboard, fabric, furniture, walls, wood, T-shirts and more.Great gifts.
  • 【Redesign Chalk Paste】Blend chalk paste together to draw your redesign color according our mixing color chart.It'll create nice soft ombre color, making silk screen transfers to create wood signs and other DIY projects.
  • 【Working on multiple surfaces】Mirrors, windows, glass, canvas, wood, painted walls, painted furniture, card decorating, plastic, craft paint, ceramic, decorative wallpaper, terra cotta, blackboard, paper, chalk board paint and more.
  • 【12 Jars Stencil Paste Set】Package come with 12 pcs chalk paste ink (Red, Blue, Yellow, Green, Lake, Orange, Purple, Pink, Brown, Black, White, Gray), 1 jar - 1.8 floz=50ml/50g, 1 Printmaking ink size: 2x2x1.5 inch.
  • 【9 Pcs Silk Screen Printing Squeegee】4 pcs Mini Squeegees size 1.57x1.97x0.15 inches, 4 pcs Large squeegees size 2.52x1.8x0.2 inch, 1 pcs rubber paint stir sticks length is 6.49 inch.Stencil Printing Starter kit is convenient to apply chalk paste or stencil Ink on transfer to make it leak to the substrate for DIY hand printing easier.
Check Stock

Vertical Type Screen Printing Washout Tank 110V Backlighting Silk Screen Washing Booth

  • type screen printing frame wash tank is mainly used in screen printing halftone exposure after washing and washing quality inspection.Rinse tank long....
  • You can put in any screen frame which side length is less than 29.5" (75cm).
  • if the frame length is larger than 29.5" (75cm) but less than 37.4"....
  • Composite construction, easy installation and operation. The machine adopts modular structure.
  • Just according to the installation drawing or....
  • In front of the cabinet has a waterproof curtain, it could avoid water splashing out. Operater can also adjust the hanging height to meet different....
  • Beside the shelf, there is a 23.2" (59cm) long , 14.5" (37cm) wide table-board. You can place some chemicals or accessory tools..
Check Stock

Techtongda 6 Color 6 Station Silk Screen Printing Press Machine Screen Printer Heavy Duty DIY

  • This is a simple 6 Color 6 Station Screen Printing Press, you can print onto clothing, woven fabric, metal, paper, copybook, plastic, circuit board,....
  • For skillful operator, two person could print 30-50 pieces 6 color T-shirt in one hour..
  • Max frame size capacity: 16"x20"(40cmx50cm) This press come with bracket. It is very easy to intsall and adjust the platen..
  • The screen layer and the pallet can rotate independently, which makes it easier for multi-color printing. This machine is manual color matching....
  • Screen clamp could be moved up and down within 2"/ 5 cm Net weight: 264 lb/ 120kg Gross weight: 287 lb/130.5kg.
Check Stock

Inkjet Transparency Paper Sheets, Anezus 50 Pack Printable Transparent Film Quick Dry Clear 8.5 x 11 Inches Transparencies Clear Paper for Inkjet Printer Screen Print

  • QUICK DRY TRANSPARENCY SHEETS Transparency film features fast-drying, helps ink dry more quickly to save your time to waiting the ink dry and less mess of file stacking.
  • CLEAR PRINTER PAPERTransparent film is clear looking, to less exposure time for screen prints and clearer overhead projector transparencies.
  • IDEAL FOR PRINTING AND CRAFTSThis versatile transparency sheets not just for charts and graphs, also can be used in screen printing, DIY crafting, cards making and bulletin board items etc..
  • INKJET TRANSPARENT FILM VALUE PACKTotally 50 transparency papers per pack, suitable for inkjet printing, craft projects, presentation and educational purposes.
  • TRANSPARENCIES SIZE Each inkjet printer transparency sheet measures 8.5* 11, thickness 4.7 mil, each transparency sheet is individually protected.
Check Stock

3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board

  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing..
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing..
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet..
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard..
  • Used with other motherboards: The material detection module uses the level tra....
Check Stock

Creality 3D Printer Part Limit Switch with Separate Package CNC for RAMPS 1.4 RepRap 3D Printer CR-10 10S,S4,S5,Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5 (Pack of 3)

  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode..
  • 2.Serial port screen mode supports two printing modes: SD card and U disk..
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET).
  • Reserve the extension port of automatic shutdown after printing (PS-ON).
  • 5.2 sets of UART serial port extension ports are reserved for DIY use..
Check Stock

RVCA Carve Black Red Gray White Screenprint Pullover Crewneck Men's Sweatshirt (XL)

  • 6 Color 6 Station Screen Printing Machine (006527)；Use it to press onto: *Knitwear *Paper&wood *Plastic *Glass and ceramic *Metal *Sign *Circuit board *Leather；Specifications Machine dimensions 190*190*110cm/74*74*43inch Pallet area 45*55cm(18*22inch).
  • 1800W Flash Dryer (006042)；Main Features Foundation is consistent with heating box ,stable, saving-space and overcoming the flaw caused by traditional “十”that easily gets knock and stuck. Easy operation: After well installed, connect the power supply and turn on the switch and then it will work automatically. With four universal wheels, easy move. Sturdy design with powder coated housing to prevent rust. US, Canada Plug standard Easy assembly. with a few bolts you have a flash that's ready.
  • UV Exposure Unit (006800)；Parameters Input Voltage of Exposure Unit: 110V Exposure Area: 19.7"x19.7" (50x50cm) Glass Size: 14.6"x18.5"x0.3" (35x45x0.8cm) Rubber Subplate Size: 19.7"x19.7" (50x50cm) Light Tubes' Powder: 26W/pc Total Powder: 52W Net Weight: 22Lb (9.7kg) Shipping Weight: 28Lb (13kg) Package Size: 21"17"12.6" (53x43x32cm).
Check Stock

Printing Calculator with 12 Digit LCD Display Screen, 2.03 Lines/sec, Two Color Printing, Adding Machine for Accounting Use, AC Adapter Included (Light Blue)

  • [PRINTING CALCULATOR LOGIC] - This is a printing calculator/adding machine and DOES NOT function like a standard desktop calculator..
  • [2022 UPDATED DESIGN] - This Printing Calculator model features a much faster circuit board and a significantly more responsive keypad, allowing you to quickly type in your calculations..
  • [CLEAR DISPLAY] - Featuring a 4 inch screen, this calculator supports up to 12 digits - allowing you to calculate large numbers at a time. The screen is also very clear and easy to read, relieving strain on your eyes..
  • [TWO POWER SOURCES] - An AC adapter is included so you never have to worry about running out of power. However, if you want to travel, this calculator is also for you. It supports 2 AA batteries (not included), giving you the option of mobility..
  • [COLOR PRINTER] - A 2-Color Ink (Blue and Red) printer within helps you organize your calculations. This calculator uses an industry standard replaceable ink roller, the IR-40T, making the ink easy to replace..
Check Stock

VEVOR Screen Printing Press 4 Color 1 Station and 4 Pieces 20x20 Inch Aluminum Silk Screen Printing Frames with White 110 Count Mesh

  • Product Specifications: 4 Color 1 Station.
  • Silk Screen Printing Frames:Size: 20x20 Inch, Quantity: 4..
  • All Metal Construction & Durability: metal construction with electrostatic spraying and electroplating.
  • With white 110 mesh counts/inch Nylon & Teflon material..
  • Spring Device Design: The special design of the spring device that adjusts the screen up and down and the ingenious cooperation of the screen printing frame makes it easier for the user to operate according to the size and weight of the screen..
  • Excellent Printing Results: The perfect combination of screen printing machine and screen printing frame enables ink and scraper to be efficiently screen printed. After the printing is finished, the screen printing screen can be cleaned by screen washing agent and reused repeatedly..
  • Wide Application: This silkscreen press and screen printing frames can be used in costume, pillowcases, woven fabric, metal, paper, copybook, plastic, wood, glass, ceramic, leather and other products which need flat printing..
Check Stock

QIDI TECH 3D Printer, X-Pro 3D Printer with WiFi Function, Dual Extruder, High Precision Double Color Printing with ABS,PLA,TPU Filament,9.1x5.9x5.9 Inch

  • ★★★★★【Friendly Reminder: There is one spool of red color PLA, one spool of white color ABS filament, please check the filament before printing and use the correct settings to print.】QIDI TECH 3D printer, equipped with the latest dual extrusion technology, occupied the overall leading position in education, engineering, design and home/hobby printing..
  • X-Pro 3D Printer Kit features conditional breakpoint printing and upgraded 4.3 inch touch screen, Smarter and easier operation.Mute printing..
  • Durable and high temperature resistance 6mm aviation grade aluminum build platform, can be heated up to 120℃. Removable curved metal plate make it more convenient to remove the model after printing, which is widely appreciated by users..
  • The QIDI TECH 3D Printer with metal platform support rod, which upgraded to 12mm, and also including upgraded parts like motor, main board, and mechanical structure, ensuring more stable printing..
  • R QIDI TECHNOLOGY provide free one year warranty..
Check Stock