Powerbuilt Harmonic Balancer Puller and Installer Tool Set, Install and Remove Kit, Cars and Light Trucks, Storage Case - 648637
- Strong and dependable enough to last a lifetime.
- Kit services: many automobiles and light trucks.
- Tool set for removal and installation of harmonic balancers that have threaded holes.
- Removal pieces: combo yoke, national fine center screw, center point piece and bolt pairs.
- Installation pieces: national fine center screw, thrust bearing, forcing nut and jaw nut.
- Adapters included: M12-1.5, M14-1.5, M16-2.0, 7/16-Inch-20, 1/2-Inch-20, 9/16-Inch-18 and 3/416.
- Kit 12 includes 22-Piece for removal and installation of harmonic balancers with threaded holes.
Check Stock
XJX Screw-Extractor Set | Easy Out Bolt Extractor Set | Multispline and Spiral Extractor Set | Perfect for Stripped Screws, Studs, Fittings, and Lugs, Left-Hand Drill Bits | 1/8" to 13/32"（25-Piece）
- 【25-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 3-in-1 screw & nut remover kit and drill bit kit.It contains 10pcs multi-spline screw extractors, 10pcs left hand HSS drill bits, 5pcs spiral screw extractors.Multiple specifications and sizes to meet your various work needs..
- 【HIGH QUALITY HSS & CR-MO】: The drill bits of this extractor set are made of high speed steel. The screw and nut extractor kit is made of chrome molybdenum steel. These two excellent materials are harder and tougher and can be used for a variety of metal fasteners. The reverse spiral groove design bends downward to provide maximum grip..
- 【HIGH CARBON STEEL DRILL BITS】: 135° angle design of the head for easier access to fasteners and improved efficiency.High speed steel, strong than cobalt bits and not easy to wear. Surface titanium nitride coating, effective anti-corrosion and anti-rust, prolong the service life..
- 【CR-MO NUT REMOVERS】: All premium industrial grade bolt extractors are tightly designed. Grip firmly, not easy to fall off, provide more torque. Easily remove damaged bolts, nuts and screws even if they are ....
Check StockRexka 10 Sets Engine Splash Shield Screws for Ford - T30 Torx Head Bolts and Grommets for Undertray Engine Fender Liner Deflector Grille for Ford Escape F-150 Edge Focus Fusion C-Max S-Max Lincoln
- Meet or Exceed OEM Specification, Made of High Quality Durable Nylon not Plastic. Usually Used Together In Air Deflectors, Splash and Heat....
- Other Names (Screw) :Emblem Screw, Deflector Screw, Fender Liner Screw, Lower Deflector Screw, Lower Shield Screw, Under Cover Screw, Front Shield....
- Other Names(Nut) :Front Deflector Retainer Nut, Side Shield Nut, Under Cover Nut, Rear Deflector Nut, Deflector Nut, Lower Shield Retainer Nut,....
- Fits the Following Cars: C-Max 2013-2018,Fusion 2013-2018, Escape 2013-2018, F-150 2015-2018, Edge 2015-2018, Escort 1985-1990 1995-2001, Focus....
- 10 pcs of T30 Torx Drive Head Self-Tapping Screw, Black Phosphate, M5 x 20mm.
- 10 pcs of Screw Grommet,Light Green Nylon.
Check Stock
WYBENZ Screw&Bolt Extractor Set and Left Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set for Damaged, Frozen,Studs,Rusted, Rounded-Off Bolts, Nuts & Screws(29PCS)
- 29Pcs Easy Out Bolt Extractor Set: Left hand drill bit set is made of cobalt, nut and ez out screw extractor kit is made of high-hardness chromium-molybdenum steel material, and the reverse spiral groove is designed to buckle downward to provide maximum grip. Made In Taiwan!.
- Save Time and Effort:The ez out extractor kit is a 3-in-1 screw & nut removal kit and drill bit kit. The stripping bolt remover and extractor easily removes damaged screws, studs, bolts and other accessories. Whether it‘s for car maintenance or daily use, it can provide you with great convenience..
- Bolt Nut extractor Size: 1/4 inch, 5/16 inch (8 mm), 3/8 inch, 7/16 inch (11 mm), 1/2 inch, 9/16 inch (14 mm), 5/8 inch (16 mm), 11/16 inch, 3/4 inch (19 mm), Contains most common sizes..
- Screw extractor set: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32". Drill bit kit: 1/8", 5/32", 3/16, 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 11/32". Each precision tool has a clear mark, screw extractor and drill bit kit Easy out rusty or damaged screws..
- WYBENZ promises that customers can enjoy our friendly customer service (just send us an email via Amazon), and a free warranty within 365 days and Free Shipping. If you have any questions, please contact us.We also need you hel....
Check Stock
WORX WA0222 40V Nitro Driveshare Pole Saw Attachment
- Specs: Description: Hybrid Trimmer Head, Arbor Sizes: M8 x 1.25 LH x 22 mm stamped #1 screw, M10 x 1.25 LH x 21 mm stamped #2 screw, M7 x 1.00 LH x 22 mm stamped #3 screw, M8 x 1.25 RH x 22 mm stamped #4 screw, 5/16"-18 UNC RH x 19 mm stamped #5 screw, M8 x 1.25 RH stamped A nut, M10 x 1.25 LH stamped B nut, M10 x 1.00 LH stamped C nut, 3/8"-24 UNF-2B RH stamped D nut, 5/16"-24 UNF-2B RH stamped E nut, M10 x 1.50 LH stamped F nut, M8 x 1.25 RH stamped J nut, 3/8"-24 UNF-2B LH stamped K nut.
- Compatible With/Replacement For: most gas, straight and curved shaft trimmers.
- Stens 1 year warranty ensures reliability and performance for every part. We're confident that our products will work flawlessly, but in a rare case that it does not, we'll replace it anytime within one year of your order..
- Stens branded parts are trusted by professional dealers to perform OEM quality repairs. The Stens name is featured on all Genuine Stens product packaging..
Check Stock
Topec 29 Piece Bolt Extractor and Drill Bit Set, Multi-spline screw extractors, Easy Out Broken Lug Nut Extraction Socket Set for Damaged, Frozen,Studs,Rusted, Rounded-Off Bolts, Nuts & Screws(29PCS)
- 【29-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 3-in-1 screw & nut remover kit and drill bit kit. It contains 9pcs nut removers, 10pcs left hand HSS drill bits, 10pcs multi-spline screw extractors. Multiple specifications and sizes to meet your various work needs..
- 【EXACT SIZE】: Screw remover kit parts have clear specifications printed on them, 9pcs nut removers size: 3/4” (19mm), 11/16”, 5/8”(16mm), 9/16”(14mm), 1/2”, 7/16”(11mm), 3/8”, 5/16”(8mm), 1/4”. 10pcs drill bit size: 13/32", 3/8", 11/32", 5/16", 9/32", 1/4", 7/32", 3/16", 5/32", 1/8". 10pcs multi-spline screw extractors size: 13/32", 3/8", 11/32", 5/16", 9/32", 1/4", 7/32", 3/16", 5/32", 1/8"..
- 【HIGH QUALITY】: The nut remover/multi-spline screw extractor are made of high hardness chrome-molybdenum steel. Reverse spiral groove design bending down to provide maximum grip force to easily remove damaged bolts, nuts, broken screws. The left hand drill is made of HHS and the head is designed with a 135° angle. which is not easily worn and has strong penetration. Surfa....
Check StockSunny Health and Fitness Chain Drive Indoor Cycling Bike Silver with Workout Cooling Towel
- Sunny Health and Fitness Chain Drive Indoor Cycling Bike Silver.
- Designed with a heavy duty crank, steel frame, and a 30lbs chromed solid flywheel.
- Transportation wheels on the bottom for easy portability.
- IN THE BOX: 1x Main Frame 2x Front Stabilizer 1x Rear Stabilizer 1x Handlebar 1x Seat Post 1x Seat Slider 1x Saddle 3x Pop-pin Knob 1x Set of Pedals 1x Set of Cranks 4x Leveler Feet 4x Oblong Cap 10x Flat Washer 4x Allen Bolt 3x Plastic Bushing 1x Square Cap 2x Phillips tapping screw 4x Hex Nut M10 1x Water Bottle Holder 2x Nylon Nut 2x Foam Grip 2x End Cap 4x Allen Bolt 4x Spring Washer 1x Set of Handle Bar Covers 1x Handlebar Post 4x Phillips Screw 2x Allen Bolt 2x Roller 1x Allen Wrench S6.
- BUNDLE INCLUDES: Sunny Health and Fitness Chain Drive Indoor Cycling Bike Silver - Workout Cooling Towel Orange.
Check StockBnineteenteam Headless Electric Bass Zinc Alloy Locking Nut with Wrench Screw
- [HIGH QUALITY MATERIAL] Our headless bass locking nut is made by high quality zinc alloy, which is resistant to wear and corrosion.
- [EQUIPPED WITH A FULL SET OF INSTALLATION EQUIPMENT] The set also provides 2 wrench and 2 installation screw to help you to install..
- [EASY TO INSTALL] Our headless bass locking nut is portable and easy to install,very convenient to use..
- [STABILITY] The headless electric bass locking nut can hold the string tightly and sturdy..
- [GOOD CUSTOMER SERVICE]If you have any details, our customer service will explain to you patiently and meticulously..
Check Stock
Mssoomm Double Nut Ball Screw DFU2005 RM2005 20mm Length 90.55 inch / 2300mm with Double Nut BK/ BF15 Standard End Machining for CNC Machine
- with double ball screw nut and with standard end machining for BK/BF15. The lead time is 7-10 Business Days except for for Chinese National Day holiday and Spring Festival.
- WARRANTY: Within 3 months receiving the ball screw, if there is any problem except for damage caused by man-made or improper operation, with the premise of choosing the proper product model and ensuring the working environment ventilatedly and tidily, we will send a new ball screw for free or give a total refund. What you need to do is to message us through Amazon.
- Double Nut Ball Screw assembles two inner-circulate nuts together, therefore reduces the backlash of ball screw. The stability is then enhanced and the accuracy is up to 5. This design is especially good for CNC machine centers.
- No stick-slip effect, low friction, low operation noise, heats up less, reduce driving power required, and make service life longer.
- Double nut ball screw model includes DFU1604, DFU1605, DFU2005, DFU2505, DFU2510, DFU3205, DFU3210, DFU4005, DFU4010, DFU5010, DFU6310, DFU8010.
- Ball screw nut, nut housing, coupling, ball screw support BK, BF, EK, EF, FK, FF and end machining service are available, please let us know.
Check Stock
Ariat Women's FR DuraStretch Flame Resistant Mid Rise Bootcut Jean, Oceanside Entwined, 29 Long
- ...rovide support in both residential and commercial structures..
- EASY TO USE: To use this lifting shore, simply set the shore in place and use the 1" steel adjustment rod to adjust the the shore. Once the shore is in place and adjusted to the desired height, tighten the screw set to lock the nut and to set the shore in place as a permanent support solution..
- SAFE & SECURE: Built with high quality steel, this lifting shore is built to be functional, long lasting, and durable. This patented design reduces the amount of friction caused when the shore is under load and increases its jacking capability. This product comes with a safety lock set screw to ensure safety..
- SPECIFICATIONS: Range of Adjustment: 55" to 80", Safe Load Capacity: 34,000 lbs, Weight: 72 lbs, Top Plate: 8"x8"x1/2", Top Plate: 4-Holes 9/16" Diameter spaced 1" OC from edges, Acme Screw: 2.875" Diameter with Approx. 4 Acme Threads per inch, Adjustment Nut: 6" Wide 401,063 Diameter.
- TRUST IN ELLIS: Ellis Manufacturing Company has been a leading manufacturer of constru....
Check StockKegco Keg Tap Coupler, 1
- The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
- This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
- Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
- This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
- Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check StockAkron Products C-3 Adjustable Floor Jack
- MINI SCREW JACK:Although the Mini Screw Jack is small in size, it is big in strength and durability..
- EASY TO USE: To make adjustments to the height of the Mini Screw Jack, Just use a pipe wrench to turn the screw to the required height, and then tighten the positioning nut..
- SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely versatile and useful in small spaces.This product includes a safety lock set screw to ensure security..
- VARIETY OF USES:Temporarily secure a weak floor or screw jacks home leveling post floor jack..
- STURDY & DURABLE:Support Jack made of heavy duty steel, more durable and sturdy..
Check Stock5/16'' Nut Driver Bit Sets 10PCS, SKZIRI 5/16 inch Nut Driver Hex Shank Quick Change Socket Nut Impact Driver Adapter Alloy Steel
- What’s in package: 10PCS 5/16 inch (8mm)Nut Driver Bits. Length:1.65inch (42mm)..
- Premium Material: 5/16'' Nut Driver Bit is made from shock-resisting Chrome Vanadium Steel for maximum durability..
- Magnet Socket: Each 5/16'' Socket end has a magnet inside, which can attract screw nuts easily, and make it easy to take the screw nuts out after unraveling..
- 5/16'' (8mm) nut drivers are most commonly used by HVAC techs. This is a basic tool set for any HVAC technician..
- 1/4" Hex Shank: Can be widely used in electric drills, electric screwdrivers, hand screwdrivers, and air drills., etc..
Check Stock
