Categories

Best Screw Couplings

Tb Woods 5J12 Coupling

  • Item - Sleeve Coupling Flanges: Sleeve Coupling Flange.
Check Stock

Westinghouse Lighting 70272 7027200 12" Lamp Pipe Kit, 1 Pack, Yellow

  • 12, all thread lamp pipe Kit, zinc plated steel, includes two: 1/8Iron pipe x 12Threaded pipe, two 1/8Iron pipe couplings.
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
Check Stock

Ruland OD21/33-AT Oldham Coupling Disk, Black Acetal, Bore, 1-5/16\ or 33.3mm OD

  • Ruland oldham couplings have a zero-backlash balanced design for reduced vibration at speeds up to 4,500 RPM. They can accommodate high amounts of parallel misalignment (up to 10% of the hub OD)..
  • Acts as a mechanical fuse stopping power transmission during a torque overload. User can combine clamp or set screw hub with inch, metric, keyed, or keyless bore for a high level of customization..
  • Made from acetal for higher torque and torsional stiffness capabilities than nylon..
  • Proprietary hub machining process for smooth interaction between the hub and disk allowing for significantly longer life..
  • Ruland oldham coupling disks are RoHS3 and REACH compliant.
Check Stock

254\ Cord Hider - Cord Cover - Delamu Wire Covers for Cords - PVC Cable Hider - Cuttable Wire Cover Hiders for Mounted TV on Wall - Cable Management Concealer Raceway - 15x L16.9 W0.95H0.55, White

  • ...etter! Install the cord covers and hide the unsightly wires for the TV on the wall right away with all the necessary parts included in the package.
  • A Completely Wire Hider Kit: Pay the same but get more raceways and elbows. Get Delamu cable cover kit, and you’ll have all to go. You’ll get 15x cable raceways, 14x couplings, 6x flat elbows, 2x inside elbows, 2x outside elbows, 2 T-connectors, 32x screws, 32x anchors, 2x tapes, 1x instruction.
  • 10 Minutes’ Installation: Only a few minutes of work makes your living room looking refreshing new! You’ll have two flexible installation ways, just choose what best suits your need. Using double-sided tape or screw hardware. Combined with the included connectors (Couplings / Flat / T / Inside / Outside Elbows), all of your cable management needs will be satisfied.
  • Paintable and Cuttable Cord Concealer: Customize it your way! We’ve made the cord concealer channels slim and sleek to perfectly blend into your home settings. You can paint the raceway to whatever color you need to match your wall and cut it to whatever length desired with a knife or hacksaw easily.
  • Messy dangling cables are unpleasant to look at and can cause tripping risk for your kids and pets. Delamu cable....
Check Stock

Aopin 7mm to 8mm Rigid Couplings Set Screw Shaft Stepper Motor, Length 25mm / 1\ Motor Coupler Connector Rigid with Screw for 3D Printer, RC Robot, Car Model Shaft, CNC Machine, DIY Encoder 2 Pcs

  • ❤Rigid Couplings Set Screw Shaft Size: 7mm to 8mm / 0.28" to 0.31". Coupling With M4 Fastening Screws. Outer Diameter: 14mm / 0.55.
Check Stock

Rocky Mountain Goods Garden Faucet Hose Extender - 6 Foot Garden Hose with Faucet Extension for Hard to Reach Areas with Secondary Faucet - Leakproof washers - Solid Brass Fittings

  • Includes 6 foot hose extender with heavy duty brass couplings.
  • Easier hose and faucet access – Simply screw on hose in hard to reach area and install other faucet end in easier access area.
  • Leakproof washers on all connections to prevent leaks.
  • 3 Year Guarantee – If any part of your hose faucet connector fails to work we will replace it.
Check Stock

2PCS 300mm Linear Motion Rod Shaft Guide & （300mm）8mm Lead Screw & 4PCS SK8 Shaft Support & 4PCS SCS8UU Bearings & 2PCS KP08 & 2PCS Flexible Shaft Couplings

  • 2PCS 300mm Linear Motion Rod Shaft Guide.
  • 2PCS KP08 & 2PCS Flexible Shaft Couplings.
Check Stock

Aopin 4mm to 5mm Red Rigid Couplings Set Shaft Stepper Motor, Length 20mm / 0.79\ Motor Coupler Connector Rigid with Screw for 3D Printer, RC Robot, Car Model Shaft, CNC Machine, DIY Encoder 4 Pcs

  • ❤Rigid Couplings Set Screw Shaft Size : 4mm to 5mm / 0.16" to 0.20". Coupling With M4 Fastening Screws. Outer Diameter: 12mm / 0.47.
Check Stock

BCZAMD V6 Heat Sink 1.75mm for 3D Extruder Head Hotend J-Head DIY Kit Remote Built-in Bowdn Tube Connector with Collet Clip

  • Use for E V6 extruder hotend, 1.75mm filament.
  • The 1.75mm universal v6 HeatSink has been designed to use unique embedded bowden couplings which makes the bowden so compact that we merged bowden and....
  • After-sales guarantee: Each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try....
Check Stock

PumpSpy Dual Pump Install Kit - Double Sump Pump Connection, Basement Water Pump Backup Y-Connector - Sump Pump Submersible Backup Connector To Single Discharge Line - Dual Pump System To 1-1/2' Line

  • ...tall a backup system to avoid what could potentially be a major inconvenience..
  • HASSLE-FREE SET UP: There’s no cutting or gluing required during installation with this dual pump backup installer kit. Everything you need to connect a back up sump pump is in the box. There’s no need to purchase a PVC pipe, elbows, couplings and cement. Say goodbye to messy, laborious installations!.
  • WHAT’S IN THE BOX: This kit contains a Y-Connector, Two (2) 1-1/2″ Threaded Silent Check Valves, Stainless Steel Clamps and Buna-N Rubber Couplings. The only thing you’ll need to put everything together is a standard screwdriver. This kit is compatible with all pumps that have a standard 1-1/2″ NPT pump discharge/output..
  • HOW TO INSTALL: Simply screw the check valves into both pumps, drop the Y-connector into the check valve boots, attach the rubber boot to the top of the Y-connector and then to your existing discharge line. Tighten all the stainless steel clamps with a screwdriver and you’re done. It’s that easy!.
Check Stock

XZT 10000PSI Digital Hydraulic Pressure Test Coupling Kit,Repair Test Tools for USA Brand Excavator (10000PSI)

  • 【13 Couplings】This Excavator Pressure Tester Kit comes with 13 different couplings, perfect compatible with Caterpillar, Hitachi, Komutsu, Daewoo, Hyundai, Kato, Kawasaki..
  • 【High-grade Silicone Oil】Our Excavator Pressure Gauges have built-in high-grade silicone oil, which will not turn yellow, has better shock resistance and higher accuracy..
  • 【High-quality Gauges】The housing of our five gauges (150PSI/1500PSI/3500PSI/6000PSI/9000PSI) is stainless steel and Polycarbonate glass, so they are sturdy, durable, impact resistant, and clear display..
  • 【Complete Kit】Comes with 13 x Couplings, 14 x Tee Connectors, 5 x 61.5'' Test Houses, 5 x Pressure Gauges, and 1 x Sturdy PP Suitcase..
  • 【Warranty】We provide 3-year warranty and 24-hour friendly customer service. Pls feel free to contact us if you have any issue about our product..
Check Stock

Mecanum Wheel with Coupling 4PCS Omnidirectional Wheels 4WD Smart Robot Car Kit Accessories 65mm Robot Kit Drive Wheel for Arduino/Raspberry Pi DIY STEM Project

  • 003cp003e65mm engineering plastic mecanum wheels (2x left, 2x right) include 2 right wheels and 2 left wheels. Each wheel consists of 9 rollers and 003cb003ecan be driven independently.003c/b003e003c/p003e.
  • 003cp003eMecanum wheels can be moved 003cb003ein any direction without changing the direction003c/b003e of rotation of the wheels. Each of the four mecanum wheels contains a series of rollers whose axis of rotation makes a 45 ° angle to the plane of the wheel.003c/p003e.
  • 003cp003eThe mecanum wheels suitable for 003cb003eLego 003c/b003ecross shafts, can also be fitted with N20 motors by installing 3mm couplings, TT motors by installing TT motor couplings, GA25-370 by installing 4mm couplings, and 5mm couplings by installing with stepper motor.003c/p003e.
  • 003cp003eThis mecanum wheels used for 003cb003eRaspberry Pi 4/3B+/3003c/b003e,Micro:bit and 003cb003eArduino Project 003c/b003ecompatible with DC motor.003c/p003e.
  • 003cp003eThe mecanum wheel made of high hardness plastic,and 003cb003elow pulsating noise003c/b003e. Omnidirectional Wheels are not easy to damage. The mecanum wheels have a long service life and no deformation.003c/p003e.
Check Stock

uxcell 3mm to 1/8 inch Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 3mm to 1/8 inch, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold....
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock