IRWIN Drill Bit, 3-Cutter, Self Feed, 2-Inch (3046010)
- Drill bits have 3 cutting edges that are hardened for durability and long life in tough materials.
- Replaceable screw-point tip pulls the drill bit fast for clean, true holes.
- 7/16-inch hex quick-change impact shank reduces slipping in standard chucks.
- IRWIN drill bits are compatible with most 7/16-inch impact drills.
Check StockMayhew Pro 37332 Screw Extractor Set 5-Piece Black
- Used for removing broken or seized screws.
- Hardened steel edges allow for easy screw removal while the fluted cutting edges cut into the screw shaft to remove the screw.
- Includes #36961 Screw Extractor D1/8″ S10-5/16", #36962 Screw Extractor D3/16″ S3/8″, #36963 Screw Extractor D15/64″ S7/16″ , #36964 Screw....
- Black oxide finish for additional rust protection.
Check StockIRWIN SPEEDBOR Tri Flute Wood Drill Bit 1/2' X 6'(3041001)
- IRWIN SPEEDBOR drill bits use a tri-flute design for faster chip ejection and less binding.
- This 1/2-inch drill bit has cutting spurs with 3 cutting edges for faster, cleaner holes.
- A full screw tip allows the drill bit to self-feed for ease of drilling.
- The grooved hex shank helps prevent slipping in the drill chuck or bit extension.
- Fits virtually any standard 1/4-inch quick-change chucks, including impact drills.
- A fast speedbor spade bit that features a Tri-Flute design with a fast chip ejection.
- Fits all standard 1/4-inch quick change chucks.
- Full screw tip allows the bit to self feed.
Check Stock
Black Bolt Gauge SAE Metric Check a Thread Size FastenerLine 901303
- 29° ACME Thread Gauge-The 29 degree stainless steel acme thread gauge is a single piece type and it is applied to measure thread and external thread tooth pitch.The acme thread gauge range:1-10TPI,the pitch:1,1-1/3,1-1/2,1-3/4,2,2-1/2,3,4,5,6,7,8,9,10.
- Suitable for-Standard gauge for check the angle of screw cutting tools,check the width of screw cutting tools and set the position of screw cutting tools.
- Material of stainless steel-This acme thread gauge is made by stainless steel.Not easy to rust and not easy to bend.You needn’t to use anti-rust oil or take any anti-rust ways.Just put the 29 degree acme thread gauge in a dry place and it won’t rust.
- Clear scales-All the scales on the acme screw gauge are laser engraving,not painting and the acme thread gauge is not the copy of laser engraving. Don’t worry about the long friction will make the scale unclear.
- Quality after-sale Service- If you are experiencing quality issues or any problems when you receive this acme thread gauge, please feel free to contact our customer service in time and let us know the issue. We offer further solution for you to your satisfaction.
Check Stock26PCS Cut-off Wheel Screw Mandrel Set, 2mm/3mm/6mm Screw Mandrel for Rotary Tools (1/8 Shank, 1/4 Shank)
- 10 PCS 2mm (Approx 5/64)Screw Mandrel 3mm( Approx 1/8) Shank.
- 10 PCS 3mm (Approx 1/8) Screw Mandrel 3mm ( Approx 1/8) Shank..
- 3 PCS 6mm (Approx 1/4) Screw Mandrel 3mm (Approx 1/8) Shank.
- 3 PCS 6mm (Approx 1/4) Screw Mandrel 6mm (Approx 1/4) Shank..
- The base mandrel is suitable for discs such as diamond cutting wheels, resin cutting wheels and small saw blades..
Check Stock
Cricket Centrix Roc-It Dog Professional Stylist 5.75” Hair Cutting Shear and 30T Thinning Scissor Duo Set
- QUALITY SHEAR SET – Centrix Roc-It Dog Shear Duo Set includes a professional 5.75" haircutting Shear and a 30T Thinning shear that removes 50% of bulk from hair. Known to be a great performing shear at an affordable price, Centrix Roc-it Dog is one of the most popular shear brands in the professional salon industry..
- DESIGNED FOR SMOOTH, EFFORTLESS CUTTING – The Precision Cast Convex Blade is designed to provide smooth, effortless cutting. The Low-Stress Offset Grip on these professional shears allow for a relaxed open hand grip for low-stress cutting and improved cutting speed..
- HIGH-QUALITY PRECISION CAST ALLOY – High-quality precision cast alloy hair cutting scissors with precision cast convex blades that offer precision cutting and extended edge life. A removable finger rest provides added support and can be easily removed..
- CUSTOM LEAF SPRING TENSION KNOB OR ADJUSTABLE TENSION SCREW – A custom leaf spring tension knob on the 5” or 5.75” shear and an adjustable tension screw on the 30T Thinner allow for customized cutting of all hair types. Tighten for fine hair, loosen for coarse hair..
- GREAT VALUE SET – Save $49.95 on this shear duo value set, regularly priced at $249.90. The ultimate shear duo for haircutting that provides smooth, ef....
Check Stock
10Pcs Screw Extractor and Left Hand Drill Bits Set, Bolt Remover Reverse Cobalt HSS Steel Drill Bit for Remove Stripped Screws and Broken Bolts
- ...y removes damaged screws, studs, bolts and other accessories..
- Unique Design: ez out bolt extractor set is designed with a 135°angle, which makes it easier to cut into the workpiece and has less axial resistance. This design can not only increase the working length of the cutting edge, but also reduce the thickness of the cutting layer, which making the cutting effect better and without damaging other working areas..
- Multi-Purpose: Simple drill extractor is multipurpose on your life. Bolt extractors that remove broken screws, whether working on wood or metal, are ideal for construction, automotive, home DIY projects or for industrial use.These extractors are excellent if you are working in a production environment and using screw head bolts..
- High and Durable Material: The left hand drills are made from cobalt fortified HSS material, which increases durability and service life.This screw extractor has strong wear resistance and clear chip removal. HSS is harder, tougher and easier to drill, turn and remove damaged screw or bolts than other materials..
Check StockGlass Cutting Tool, Rely on a Ruler 45° Angle Clamp Tile Opener, Not Easy to Damage for Tile Glass
- Use a cutter screw rod center to the rubber particle on the back of the glass or tile (Please watch the video)..
- High quality steel + high quality alloy blade, incisive and fast cutting..
- Clamp the glass or tile, then slowly tighten the cutter screw knob to cut successfully..
- Suitable for cutting objects with a thickness of 3 ~ 15mm..
- Can be used for cutting glass, tiles, vitrified tiles (Note: tempered glass cannot be cut)..
Check Stock
One Touch Battery Powered Knife
- Powerful Kebab Cutter: 2800 RPM with 80W power, this electric knife is able to slice up to 132 lb (60 kg) every 24 hours. It is constructed by stainless steel, ABS and cast aluminum alloy. Reasonable and compact structure for long-time usage..
- 2 Durable Blades: Additional serrated blade for bone cutting attached for standby application. Both blades are (100 mm) diameter in size and made of 420 stainless steel, sharp, durable and easy to clean. Small knife grinder helps the blades to stand up for years..
- Flexible Adaption: By adjusting the screw on the top, cutting thickness is allowed to be regulated from 0 to 3 in (0-8 mm) to meet your demand. Lock the thickness after regulation with side screw..
- Considerate Details: Metal blade cover protects the user from being hurt and prolongs blade service life. Protective sleeve around electric wire for carefree usage. Comfortable ergonomic designed handle, highly fits when grabbed, anti-skid and labor saving..
- Wide Application: Kebab meat cutter slicer for effectively cutting various kinds of meat and bones. Widely used in roast meat shops, restaurants, snack bars, families, etc..
Check StockJaws of Life: Stories
- Mainly used for cutting of soft and hard copper, aluminum, brass, plastic tubes, thin-walled stainless steel pipes and other thin pipes or tubes. Please note not suitable for bike seat or bike handlebar cutting, only for soft or thickness wall ≤3.8 mm tube.
- Spurtar Pipe Cutter is a Must have Steel Cutting tool for every plumbers, electricians, vehicle mechanics, homeworkers for hobby or proffesional work.
- The tube cutter has a sturdy, lightweight slide, wheel housing and large knurled screw knob for easy control of cutting pressure for clean cuts..
- Metal pipe cutting tool with adjustable cutting capacity range between 3mm to 28mm (1/8 inch to 1-1/8 inch).
- Anti-scratch electrostatic powder coating reduces the effects of static electricity during use, resistant to corrosion and rust..
Check Stock
Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\
- ...tools required,simply loosen the knurled chuck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
- 【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
- 【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame contact is not easy to roll,1.15 pounds of solid aluminum bar handle to minimize the phenomenon of warping,the handle of the frosted sense of control more to let you handle any product details with ease..
- 【LONG SERVICE LIFE】 - Weighing 1.15 pounds of solid aluminum bar handle,high-de....
Check StockAccusize Industrial Tools 5/8\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0058
- Smooth finish on each turning tool holder marked with tool holder style and shank size..
- Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
- Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
- 9pcs hex screw, Hexagon key and Aluminum fitting case..
- *** Insert kit Item#: 2988-0058INSERTS (Sold Separately on Amazon)***.
Check Stock
Ninja Supreme Professional Razor Edge Series, Barber Hair Cutting Scissors/Shears - 6' Fine Adjustment Tension Screw - Japanese Stainless Steel
- NINJA SUPREME 3 RING HAIR SHEARS: The Ninja Supreme Three Ring Handle Bevel Edge Scissor is a premium quality professional pair of hair cutting shears. State of the art style that helps to create many types of high quality cuts that stand out from the rest..
- PREMIUM QUALITY JAPANESE 420 GRADE STEEL: Stainless steel grade 420 is a high quality corrosion resistant steel. It is known to possess outstanding strength and impact resistance properties when compared with 440 grades and other hair cutting scissors. Forged Japenese high end steel. Triple tempered stainless steel holds its superior edge. It boasts a high mirror finish, durable body with a sleek look and is built to last many years..
- ULTRA SHARP SUPER CUT BLADES: The Ninja Supreme Super Cut Scissors Measure 6" from tip to hook end and 5.50" from ring to point tip. They are well-proportioned with a beveled edge for high quality polished cuts. The ultra sharp blades will not tug hair or cause split ends by cutting. The convex blades provide perfect cutting balance and stay sharp for a long time..
- ERGONOMIC 3 RING HANDLE DESIGN: The Japan ergonomic 3 ringed handle design ensures correct hand positioning and comfort. It reduces user fatigue even when used for long periods of time..
Check Stock
