Categories

Best Screw Jacks Lift Table

Torin 8 Ton (16,000 LBs) Double Ram Welded Hydraulic Car Bottle Jack for Auto Repair and House Lift, Black, ATH80802XB

  • Capacity: 8 ton (16,000 lbs), and the lift height ranges from 6.69" to 16.94".
  • Engineered with double ram lift system, providing wider lift range than common bottle jacks.
  • Equipped with a extension screw top, adjust it before actually pumping.
  • Special hydraulic oil features wide working temperature, which ranges from -13 °F to 140 °F, suitable for variety application.
  • Includes 1-year limited manufacturer warranty.
Check Stock

Sauton Coffee Table Lift Mechanism Lift up Coffee Table Hardware Black Spring Stand Furniture Hinges

  • -The lift up table mechanism made of heavy duty steel,the surface after paint plated treatment..
  • -The multiple screw hole designs, very easy and convenient to install it.Package included a pair of Black Lift Up Modern Coffee Table Mechanism....
  • -The lift top table hardware suitable for functional coffee table tea table, retractable coffee table and so on..
  • -The coffee table lift mechanism is a good idea for table, it helps to save space, optimize the living room furniture combination..
  • -The lift coffee table hardware designed with Spring Protective Aluminum tube,can protect the spring,supports slowly open and close. But does not....
Check Stock

BAOSHISHAN 6 Ton Double Ram Bottle Jack 6-1/4\ to 15-3/4\ Lifting Range Hydraulic Welded Bottle Jack Car Jack

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 6 ton bottle jack..
  • [BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/4"..
  • [SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 6 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [PARAMETER] - Rated capacity: 6 ton (12,000 lbs) | Max height: 400mm/15.75" | Min height: 160mm/6.30" | Total lift: 9.45" | Adjustable height: 60mm/2.36" (extension screw top) | Net Weight: 4.9kg/10.8lbs.
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or malfunction of the bottle jacks, please do not hesitate to contact the after-....
Check Stock

Yaheetech 2 Way Lift Top Coffee Table with Storage and Side Drawer for Living Room, 40 Inch Lift Up Center Table with 2 Hidden Compartments and Metal Frame, Easy Assembly, Taupe Wood

  • ...& urban】This coffee table strikes a clean-lined silhouette and boasts a neutral finish with weathered accents and a matte black metal frame for a thick rustic industrial appeal. The mixed elements of wood and metal make this coffee table a welcome addition to any lodge or modern farmhouse/industrial aesthetic..
  • 【Screw-in feet】The lift-top coffee table sits on four protective feet to prevent accidental scratches or scuffs during use. In case of uneven floors, these screw-in feet help level the table to the floor..
Check Stock

BESTOOL Hydraulic Welded Bottle Jack, 20 Ton (40,000 lb) Capacity, Hydraulic Jack with Anti-Leakage Design Structure, Black

  • Bottle jack 20 ton engineered using a drop forged alloyed steel construction for quality and durability.
  • Inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks.
  • BESTOOL jack is tested for safety. Built-in oil-bypass and secure valve will automatically protect jack hydraulic system when overload.Keep Red bottle jacks from being damaged and keep you safe..
  • Features a lifting range of 9-7/16" to 17-5/8" with a 20 ton (40,000 lb) capacity.
  • Has a lifting height of 5-7/8" and an adjustable screw top extension that adds an additional height of 2-3/8".
  • Glide-action pressure pump is designed to lift with minimal effort.
  • Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits,Car jack surface paint is oil-proof and anti-corrosion.Easy to clean.
  • Hydraulic bottle jack designed for residential and commercial use that can be widely used for sedans, suv, travel trailer, station wagon, mini bus.
  • Serrated, heat treated saddle provides generous lifting area and secure grip.
Check Stock

Exmark 126-7282 Jack Kit with Adapter

  • The Hi-Lift 48 inch all-cast jack is constructed with cast iron components for ultimate strength and durability. Hi-Lift Jacks are the only all-cast jacks manufactured in the world..
  • Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks.
  • Two piece handle and socket is durable and reliable.
  • Safe use information stickers, including rated load details and operating instructions, affixed to handle.
Check Stock

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • ...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
  • Install the base plate on a stable concrete slab under the area you wish to support.
  • Use the mounting holes on top and bottom plates to bolt jack to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • ...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor ja....
Check Stock

Hi-Lift Jack HL485 48\ Hi-Lift Red All Cast Jack

  • The Hi-Lift 48 inch all-cast jack is constructed with cast iron components for ultimate strength and durability. Hi-Lift Jacks are the only all-cast jacks manufactured in the world..
  • Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks.
  • Two piece handle and socket is durable and reliable.
  • Safe use information stickers, including rated load details and operating instructions, affixed to handle.
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • ...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor ja....
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • ...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has an 11,200-pound (5,080 kg) capacity.
  • Max height has a 2,500-pound (1,134 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor....
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

Torin 12 Ton (24,000 LBs) Capacity Hydraulic Welded Heavy Duty Bottle Jack, AT91203BB

  • Hydraulic bottle jack designed for residential and commercial use that can be widely used for cars, trucks, and SUV's.
  • Serrated, heat treated saddle provides generous lifting area and secure grip.
  • Features a lifting range of 9" to 18" with a 12 ton (24,000 lb) capacity.
  • Has a lifting height of 5-7/8" and an adjustable screw top extension that adds an additional height of 3-1/8".
  • Engineered using a drop forged alloyed steel construction for quality and durability.
  • Inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks.
  • Glide-action pressure pump is designed to lift with minimal effort.
  • Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits.
Check Stock