Best Screw Jacks base Plates
Fowler 52-104-025-0 Machinist Screw Jack Set
- Stability: The base of these machinist tools is 1.5” for added stability.
- Durable: Consists of a heavy steel cast base with an adjustable steel screw and a tilting swivel head with a lock nut for permanent positioning.
- Weight Capacity: The total weight capacity for the machinist jacks is 1000lbs.
- Set Includes: Two machinists jacks along with a fitted case.
Check StockChelsea Aged Bronze 1 Cable TV with Hardware
- Add a classy antique look to any room with these metal oil rubbed bronze wall plates.
- In styles and finishes that complement the most popular interior fashions.
- Lacquer protected...provides superior finish to cheaper stamped steel plates.
- Oil rubbed bronze with subtle copper hues Includes mounting screws.
- Choose from Phone Jacks, Cable (Coax) Jacks, Data (Cat 5) Jacks, Multiple & Combination Jacks.
Check StockOil Rubbed Bronze Wall Switch Plate Outlet Cover Toggle Rocker GFI Duplex Outlet (Power outlet duplex single)
- Add a classy antique look to any room with these metal oil rubbed bronze wall plates.
- In styles and finishes that complement the most popular interior fashions.
- Lacquer protected...provides superior finish to cheaper stamped steel plates, Oil rubbed bronze with subtle copper hues, Includes mounting screws.
- Inserts feature a dark brown finish that matches a variety of bronze finishes, Inserts fit inside a single rocker or decora wall plate (sold separately).
- Choose from Phone Jacks, Cable (Coax) Jacks, Data (Cat 5) Jacks, Multiple & Combination Jacks.
Check StockSulythw RV Slide Out Supports Stabilizer Jacks Heavy Duty Rust Resistant Steel Adjustable from 19'' to 47'' for 5th Wheel 5000 lbs Capacity, 4 Pack
- ...ace of mind when walking back and forth inside your motor home..
- 【EASY TO INSTALL】: From the lowest setting, slide your RV slide out stabilizers travel trailer jacks under your slide out rail then use the folding handle to raise the bracket slowly to meet the RV slide out supports bars.
- Trailer stabilizing jacks screw mechanism provides support to your slide out room when it is in use for weeks or a full season.
- It is suggested to use concrete blocks or wooden leveling blocks for campers to stabilize the RV slide out jacks on an even surface..
- 【BUILT TO LAST】: Constructed of heavy-duty steel, these RV trailer stabilizer jacks provide maximum strength and durability.
- Each camper slide out stabilizer is finished with a zinc powder-coating for longevity and resistance to rust and corrosion.
- Folding handle allows you to store your trailer slide out supports in small compartments with your other RV accessories.
Check StockDumble RV Slide Out Stabilizer Jacks – 21in-37in Travel Trailer Stabilizer Jacks Camper Jack Stands, 2 Piece Set
- ...ilizers travel trailer leveling jacks to add to your camper accessories.
- EASY TO INSTALL: From the lowest setting, slide your RV slideout stabilizers travel trailer jacks under your slide out rail then use the folding handle to raise the bracket slowly to meet the RV slideout supports bars.
- Trailer stabilizing jacks screw mechanism provides support to your slide out room when it is in use for weeks or a full season.
- It is suggested to use concrete blocks or wooden leveling blocks for campers to stabilize the RV slide out jacks on an even surface.
- CHOOSE THE PERFECT ADJUSTABLE JACK STANDS FOR YOU: This RV jack stands set includes (2) adjustable RV Slide Out Supports that can adjust from 21 inches to 37 inches in height (53.3 to 94 cm).
- Measure the distance between the bottom of your slide-out and the ground or the top of your RV leveling blocks.
- Pick the size that would fit best between this space.
Check StockDumble RV Slide Out Stabilizer Jacks – 16in-28in Travel Trailer Stabilizer Jacks Camper Jack Stands, 2 Piece Set
- ...ilizers travel trailer leveling jacks to add to your camper accessories.
- EASY TO INSTALL: From the lowest setting, slide your RV slideout stabilizers travel trailer jacks under your slide out rail then use the folding handle to raise the bracket slowly to meet the RV slideout supports bars.
- Trailer stabilizing jacks screw mechanism provides support to your slide out room when it is in use for weeks or a full season.
- It is suggested to use concrete blocks or wooden leveling blocks for campers to stabilize the RV slide out jacks on an even surface.
- CHOOSE THE PERFECT ADJUSTABLE JACK STANDS FOR YOU: This RV jack stands set includes (2) adjustable RV Slide Out Supports that can adjust from 16 inches to 28 inches in height (40.6 to 71.1 cm).
- Measure the distance between the bottom of your slide-out and the ground or the top of your RV leveling blocks.
- Pick the size that would fit best between this space.
Check StockSulythw RV Slide Out Supports Stabilizer Jacks Heavy Duty Rust Resistant Steel Adjustable from 19'' to 47'' for 5th Wheel 5000 lbs Capacity,2 Pcs
- ...ravel trailer leveling jacks to add to your camper accessories..
- 【EASY TO INSTALL】: From the lowest setting, slide your RV slide out stabilizers travel trailer jacks under your slide out rail then use the folding handle to raise the bracket slowly to meet the RV slide out supports bars.
- Trailer stabilizing jacks screw mechanism provides support to your slide out room when it is in use for weeks or a full season.
- It is suggested to use concrete blocks or wooden leveling blocks for campers to stabilize the RV slide out jacks on an even surface..
- 【DIFFERENT DESIGN】This stabilizer jack utilizes a different design which is equipped with a spring inside . When you need to adjust the height of use, pull out the handle on the side combine with the spring to adjust the height of the stabilizer easily and effectively..
Check StockUS JACK D-51126 20 Ton Bottle Jack Made In USA
- OTC's 8-Ton Bottle Jack features a rugged forged cylinder and base to ensure strength and prevent leaks, along with a chromed pump piston and ram for additional rust resistance.
- In-line design (pump mechanism centered on the cylinder) makes the jack much easier operate and manuever into position with the handle compared to offset designs.
- Specifications include: 4-15/16 inch long stroke, 7-13/16 inch minimum retracted height, 15-3/4 inch maximum height with screw extension, 3 inch long screw extension.
- 1-3/8 inch diameter saddle, 3-9/16 inch x 6 inch rectangular base.
- OTC bottle jacks will provide years of reliable service, but eventally time and use will require new seals so every OTC bottle jack includes a free, life extending, seal kit.
Check StockVIAIO Barbell Jack, Effortless Loading/Unloading Barbell & Plates,Bear at Least 1000 Pounds, Small and Portable, Durable, Perfect for Grip Plate, Weight Plate, Bumper Plate, Strength Training Plate
- [EFFORTLESS LOADING/ UNLOADING BARBELL] VIAIO dead wedge are the creative substitutes of the hard pull jacks, let you can load/ unload easily. We design them to make you easiler to change the weight plates, not waste your precious exercise time..
- [SIMPLE TO USE] VIAIO Deadlift wedges are very simple to use. Only put the deadlift wedges on the ground, then scroll the bumper plates to the deadlift wedge. It will lift the barbell 0.5 inch high from the ground. So you can easily load or unload the bumper plates..
- [MULTIFUNCTION] VIAIO bar jacks have many uses. They can be used to load/unload trap bars, Olympic barbells to perform regular or deficit deadlifts on the ground or on the boxes. And they are suitable to any plates, including bumper plate, cast iron plate, hexagonal plate, etc..
- [PORTABLE & DURABLE] Unlike the large, clumsy stiff-pull jacks, VIAIO barbell jack is small, portable. You can take them out and use them when you go to different workouts. They are the perfect fit for your gym bag, and they doesn't take up much space..
- [HIGH QUALITY MATERIAL] VIAIO deadlift wedge pairs are made of durable, stable, Nontoxic and light rubber material. We have tested them on over 1000 pounds weight. We offer 7 days * 24 hours one-to-one customer service. If yo....
Check StockLOFINDAR 12'' Acrylic Crystal Cake Stand, Back cake stand, Round Cake Stands, Metal Dessert Cupcake Pastry Candy Display for Wedding, Event, Birthday Party
- NOT flimsy !!! Pull out the rod and press hold the base plate then screw tighten it !!! If you install and feel not stable, it is because the rode is not right used. We have videos for the installation, if still have problem please contact us!.
- Premium Quality - Made of iron, heavy top quality black cake stand with acrylic pendant. Exquisite craft, welding and finishing, durable and environmentally-friendly..
- Size: The price is one stand, 11.81 inch/30cm diameter plates, all stand at 12.6 inch/32cm height..
- How to install ? Screw the center rod in to base, Place the central pillar over the screw rod,Make sure the right way up,Screw the pedestal foot onto the screw rod. Note : The screw is long enough, Please hold the base with your hand and then screw tight.
- The metal cake stand holder set is exquisite for weddings, birthday party, baby shower, anniversary, afternoon tea and any other romantic occasions, can be applied for home decoration, cakes, candies, fruits, also is an elegant choice for gifts.
Check StockAbba Patio 4Pcs Offset Umbrella Base Plastic Cantilever Base Weights Plate Set Water&Sand Filled Umbrella Base for Cantilever Offset Patio Umbrella 180lb Black
- 4 pc Weight Set for Offset Cross Base: The 4 triangular shaped black weight plates are designed to fit in a cantilever umbrella cross base and give....
- Easy to Fill: Purchase Sand and use the included plastic funnel to fill each section with dry or wet sand. Screw the cap on and you have weight for....
- 150 lbs to 180 lbs of Weight: When all 4 plates are filled with just sand the weight is approximately 150 lbs. With water added to make wet sand, the....
- Location Flexibility: By filling these weight plates and securing them on a cross base, you can put your offset umbrella in any location you want. It....
- Durable Plastic Construction: Each of the 4 black plates are made from heavy-duty plastic that are weather resistant, UV protected and waterproof.....
Check StockLOFINDAR 10'' Acrylic Crystal Cake Stand, Back cake stand, Round Cake Stands, Metal Dessert Cupcake Pastry Candy Display for Wedding, Event, Birthday Party
- NOT flimsy !!! Pull out the rod and press hold the base plate then screw tighten it !!! If you install and feel not stable, it is because the rode is not right used. We have videos for the installation, if still have problem please contact us!.
- Premium Quality - Made of iron, heavy top quality black cake stand with acrylic pendant. Exquisite craft, welding and finishing, durable and environmentally-friendly..
- Size: The price is one stand, 9.84 inch/25cm diameter plates, all stand at 8.46 inch/21.5cm height.Premium Quality - Made of iron, heavy top quality black cake stand with acrylic pendant..
- How to install ? Screw the center rod in to base, Place the central pillar over the screw rod,Make sure the right way up,Screw the pedestal foot onto the screw rod. Note : The screw is long enough, Please hold the base with your hand and then screw tight.
- The metal cake stand holder set is exquisite for weddings, birthday party, baby shower, anniversary, afternoon tea and any other romantic occasions, can be applied for home decoration, cakes, candies, fruits, also is an elegant choice for gifts.
Check StockIOUALEY 2 Pack 41mm and 43mm Tripod Quick Release Plate Camera Mounting Adapter, 2 Sizes QR Release Camera Tripod Ball Head Parts Replacement Compatible with Ambico Sunpak Kalimar Zomei Tripod Mount
- 41 mm Black Tripod Quick Release Plates: Length 45mm (1.77") x Width 41mm (1.61") x 12mm(0.47"), Bottom Size: 41mm (1.61") x 41mm (1.61"). Compatible with Ambico V-0550, V-0551, V-0552, V-0553, V-0554 (fluid type head only), Sunpak 7500 Pro 7500tm 7575, Kalimar Pro-Tech V-40 etc..
- 43 mm Black Tripod Quick Release Plates: Length 65mm (2.6") x Width 51mm (2") x 15mm(0.59"), Bottom Size: 43mm (1.69") x 43mm (1.69").Compatible with CX-444, CX-888, CX-460, CX-460mini, CX-470, CX-570, CX-690, DF-50, VCT-D580RM, VCT-D680RM, VCT-R640,Torjim 60-Inch AX60, 67", Endurax 66" ETR66, 67", UBeesize 60-inch TR60, KingJue KingJoy 60" VT-860, Victiv 72" T72, Zomei Q111, Jolican 65" H65, Mactrem PT55 tripods etc..
- Premium Material: The camera mount adapter plates is made of premium PVC material. The middle anti-twist locking screw is made of aluminum material. The surface is finely oxidized, durable and strong. With standard 1/ 4 inch screw, and the screws on the quick release mount bottom could help you install faster..
- Easy to Install: According to the card position of the Pan/ Tilt/ Zoom, you could insert the mount quick release plates directly for installation. You could adjust the slotted screw with your fingers or tools. The quick release tripod mount adapter could ....
Check Stock