Categories

Best Screw Machine Tool Holder

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

5 Packs Tool Holder for Milwaukee M18 Tools Fit for Dewalt 20V Dril Mount Holder with Screws Red

  • Electric Tool Holder perfect fit for Milwaukee M18 18V tools, also fit for the Dewalt 12V 20V tools, organize and hang your tools, save more space..
  • The electric tool holder with the 4 screw holes can be installed at any angle, upside down or placed under the shelf..
  • The hard plastic bracket is sturdy and durable, made with ABS plastic..
  • The electric tool holder has countersunk head screw holes,which can install easily and securely..
  • 5 pcs Holder, 20 pcs Screws. If you have any questions,do not hesitate to contact us.We will solve your problems within 24 hours..
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

GBJ 10pcs RCMT10T3M0 Gold + SRDCN 1616H10 5/8\ 45° Lathe Turning Holders Lathe Turning & Profiling Tool Holder for Round Carbide Inserts RCMT (SRDCN1616H10+RCMT10T3M0 YBC251)

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0001INSERTS (Coming Soon)***.
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Gudoread Pivoting Bit Tip Holder - Magnetic Screwdriver Bit Holder for Drill, Adjustable In 20 ° Rotation Mode (1, White)

  • ... organizer that allows you to organize ¼” drive hex bits easily and keeps your bits safe & secure, while letting you keep track of them without losing any – best screw bit storage!.
  • SMART ADVANCED DESIGN – With 69 holes for 1/4” drive hex bits, 3 specially designed holes hold 3/8” drive chucks and 18 clip holders for mid-size to long bits, this screwdriver bit holder gives easy access to your bits when needed. The hex bit holder’s push-button release makes removing any individual rail simple – organize like a boss with our hex bit drawer organizer!.
  • PREMIUM QUALITY – MADE IN USA from the highest grade materials, the hex bit holder is strong, impact resistant, durable, and long-lasting. The taper-lock bit holder gives your bits a secure hold and can be hung vertically or laid horizontally for best use – STATE-OF-THE-ART hex bit organizer!.
  • COMPACT BIT STORAGE UNIT – Giving you more storage in less space, the bit boss universal bit organizer helps keep your garage or workshop clutter-free and holds a wide variety of bits. The bits are organized in a unique manner allowing the screw bit holder to fit in your tool drawer – MUST HAVE tool accessories..
  • 100% SATISFACTION PROMISE – Our driver bit holder is designed to help customers kee....
Check Stock

Ten Specimen Density Set (Ten Piece/Cube/Block)

  • ☛ 1,【 What You Get 】------ In this kit, You will get 10Pcs E10 Miniature Bulb Holder and 10Pcs E10 White Bulb, In total 20Pcs .Perfect for Physics Laboratory Electricity Connection, Demos Teaching Basic Principles Of Electricity And Simple Circuit Wire Works..
  • ☛ 2, 【 Screw Type Easy for students to use】 ------ This is great for home school making and breaking a single electrical connection circuit experiments. good for teaching basic principles of electricity & how a simple circuit works. screw type binding post, If you use alligator clips you might want to temporarily remove the connector knobs..
  • ☛ 3, 【 Wide Applications】 ------ These are great for demos and project. Easy to use and great learning tool for kids. I think practicing on an education model would definitely benefit any student. these are low voltage, low current miniature bulb holder. for low voltage DC to power. 2.5 Volts, 3 amps, 6 volts max.as it has exposed uninsulated contacts..
  • ☛ 4, 【 Miniature bulb holder Good Choice 】------- The Miniature bulb holder is sturdy and well made. It works well in the hand of students. Miniature bulb holder provides stability in handling and visualization of electrical principles, screw type binding post, screw down..
Check Stock

SHARDEN Ratchet Screwdriver 13-in-1 Ratcheting Screwdriver Set Multi Screwdriver Tool All in One with Torx Security, Flat Head, Phillips, Hex, Square and 1/4 Nut Driver

  • ... screwdriver bits: T15/T20 Security Torx, 4mm/5mm/6mm Flathead, PH1/PH2/PH3 Philips, H4/H5 Hex, and SQ1/SQ2 Square. All the bits needed in one ratchet screwdriver set, reduce the number of tools you must carry.
  • 【Space Saver】Ratcheting screwdriver set stores 12 changeable tips in the handle with an integrated bit holder. It's convenient to screw off the end cap and switch the bits. The screw driver handle is 5.90" length, takes up very little space, fits into pocket, also suit for EDC, kitchen drawer, tool belt, tool box or backpack.
  • 【Humanized Design】Our screw driversets set has been professionally designed to maximize your repair capabilities. Cushion grip bi-material handle provides superb comfort, slip resistant and maximum torque. Magnetic bit holder ensures speedy and secure bit changes while the 1/4 bit holder applies to standard 1/4" bits.
  • 【Durability & Reliability】All bits are quality constructed with CRV Steel for longevity and durability. This screw driver set is covered by SHARDEN's lifetime warranty and 30 days money-back. If you have any issues, please don't hesitate to contact us, we will do our best to help every customer.
Check Stock

MagBand Magnetic Wristband For Holding Screws, Nails, Drill Bits - Strong Magnet Tool Wristbands for Men & Women

  • Have Your Tools Close At Hand! - Are you tired of going back & forth to grab a screw or nail while trying to make repairs or finish a DIY project? With our magnetic wristband, keep everything safely within reach without the added bulk of a toolbelt..
  • Super Strong Wristband Tool Holder! - 10 powerful magnets are embedded into lightweight mesh to hold small hardware for easy access. Great for home improvement, construction & auto repair. Portable & compact band that’s ideal for tight spaces!.
  • One Size Fits Most! - Its unique design, made with 1680D ballistic oxford fabric & breathable inner mesh, makes this tool wristband fit almost any wrist perfectly. Can also wrap around your bicep, forearm, or attached to your belt instead. Like a portable toolbox!.
  • Great for Gifts! - This magnetic wrist screw holder is the perfect mens gift for the Dads, husbands, boyfriends, or any handyman or woman in your life. Save time & energy with this convenient magnetic wristband!.
  • Satisfaction Guaranteed - Rest assured if you are not completely satisfied with this magnetic wrist tool holder for any reason, simply return the wristband within 90 days for a full refund..
Check Stock

Adhesive Magnetic Strip for Knives Kitchen with Multipurpose Use as Knife Holder, Knife Rack, Knife Magnetic Strip, Knives Bar, Kitchen Utensil Holder, Tool Holder for Garage and Kitchen Organizer

  • BRAND X-bet MAGNET is the first leader in the craft and DIY magnets niche. Our Bestsellers have 1000+ excellent reviews. Now we have launched our own adhesive knife magnetic strips after the numerous requests from our customers. Longtime tests proved high quality & strength of our Magnetic Knife Strip – Magnetic Tape.
  • PREMIUM Quality Material with Long Lasting 3m sticky magnetic knife holder! 2 PCs Magnetic Strips for Knives with Adhesive Backing: 1.26 Inch x 0.16 Inch x 12 Inch.
  • STRONG, DURABLE & FLEXIBLE Knife holder magnetic strips with 1250 Gauss - Ideal holding power. STRONG TESA ADHESIVE BACKING - Stronger than most brands out there!.
  • EASY TO CUT AND INSTALL magnetic knife strips. Sticky bar magnet side does not leave any marks. Adhesive on one side, flexible magnet on the other - sticks great to plastic, metal, concrete, tiles, etc. Can be used as magnet tool holder, tool rack, wall knife holder, tool organizer, kitchen utensil holder, tool rack, knives bar, holder block, magnetic garage tool, magnetic screw holder and tool stand for Garage Storage and Kitchen Organizer.
Check Stock

(Pack of 4) Angle Grinder Holder Tool Wall mount Bracket for 5inch Grinder

  • Store your Grinder vertically. One convenient, compact rest for easy access..
  • Can be wall mount via screw or weld onto metal surface.
  • Holds most 5 inches grinders. Made of 2mm steel plate in yellow chromate zinc plating finish.
  • Multi-purpose tool. Must have for home garage, machine shop or warehouse..
Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set in Fitted Box, 2387-2004

  • 7 piece indexable carbide lathe turning tool set. Shank size: 1/2 inch x 1/2 inch. Overall Length: 4".
  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
  • *** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon)***.
Check Stock