Categories

Best Screw Thread

E-Z LOK 319-4 Insert 1/4-20 Int. Coarse Thd., 3/8-16 Ext. Thd., .375 Lg., Thinwall, Steel

  • Important Parameters: Size: M6(inner diameter) x 1.0(installed pitch) x 3D(installed length=3*6mm=18mm), outer diameter: 7.6mm(Min.).
  • 7.9mm(Max.), suitable drill bit diameter is 6.3mm..
  • Function: Steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
  • Easy to Maintenance: Install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • Excellent Performance: Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance..
  • Usage Scenario: These threaded inserts are Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread. It can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
Check Stock

Thread Repair Tool Stainless Steel 20Pcs Rethreading Tap Set for Female Thread Repairing Insert Sleeve

  • The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
  • When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
  • Using thread insert to convert mm---inch screw hole, it is convenient and fast..
  • Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiators, etc.
  • Parts thread hole repair, such as injection molding machine template thread hole repair.
  • Imported equipment or machinery thread dam.
  • Easy to use,convenient to operate,saves effort and time in use..
Check Stock

100pcs Stainless Steel SS304 Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 2D Length for Helical Repair

  • Helicoil thread repair kit is easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • The steel thread inserts can effectively improve screw connection, greatly improving the reliability..
  • M8 helicoil is suitable for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
  • Helicoil m8x1.25 can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
  • Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage..
Check Stock

#4-40 x 1 18-8 Stainless Steel Vented Socket Head Cap Screw

  • Price For: Each System of Measurement: Inch Screw Industry Standards: ASME B18.3 Drive Type: Hex Socket Rockwell Hardness: B70 to B95 Basic Material: Stainless Steel Head Height: 0.112" Head Dia.: 0.183" Thread Dia.: #4 Drive Size: 3/32" Fastener Finish: Plain Vented Hole Size: 0.035" Screw Style: Socket Head Cap Screw Material Grade: 18-8.
  • Thread Direction: Right Hand Temp. Range: 250 Degrees F Screw Head Type: Vented Item: Vented Socket Head Cap Screw Min. Tensile Strength: 80, 000 psi Dia./Thread Size: #4-40 Thread Style: Partially Threaded Thread Length: 3/4" Length: 1" Country of Origin (subject to change): Multiple.
Check Stock

M12-1.75 x 50mm Zinc-Plated 12.9 Alloy Steel Socket Head Cap Screw 50 pk.

  • Price For: Each Drive Type: Hex Socket System of Measurement: Metric Dia./Thread Size: M12-1.75 Screw Style: Socket Head Cap Screw Thread Dia.: M12 Fastener Thread Type: Metric Coarse Thread Direction: Right Hand Material Grade: Class 12.9 Item: Metric Socket Head Cap Screw Vented Hole Size: Not Vented Basic Material: Steel Min. Tensile Strength: 176, 900.
  • Head Height: 12mm Head Dia.: 18mm Rockwell Hardness: C39 to C44 Thread Style: Fully Threaded Screw Head Type: Cylindrical Thread Length: 50mm Screw Industry Standards: DIN 912 Drive Size: 10mm Fastener Finish: Zinc Plated Length: 50mm Country of Origin (subject to change): Multiple.
Check Stock

8 Pack M6x50 Hanger Bolts Double Headed Bolts Self-Tapping Screw 50mm Hanger Bolts for Furniture

  • Machine Screw Thread Length: 22mm / 0.87".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture jointing. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock

uxcell M8 Hanger Bolts Length 2\(50mm) Double Headed Bolts Self-Tapping Screw 8mm Wood Joint Furniture Legs 8pcs

  • Wood Screw Thread Length: 12.5mm / 0.49".
  • Machine Screw Thread Length: 12.5mm / 0.49".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture jointing. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock

5/16 -18 x 1 18-8 Stainless Steel Vented Socket Head Cap Screw 5 pk.

  • Price For: Each Drive Type: Hex Socket System of Measurement: Inch Screw Industry Standards: ASME B18.3 Fastener Finish: Plain Thread Direction: Right Hand Temp. Range: 250 Degrees F Thread Dia.: 5/16" Length: 1" Basic Material: Stainless Steel Item: Vented Socket Head Cap Screw Min. Tensile Strength: 80, 000 psi Head Height: 0.313" Head Dia.: 0.469".
  • Screw Head Type: Vented Rockwell Hardness: B70 to B95 Screw Style: Socket Head Cap Screw Thread Style: Fully Threaded Material Grade: 18-8 Thread Length: 1" Vented Hole Size: 0.078" Drive Size: 1/4" Dia./Thread Size: 5/16"-18 Country of Origin (subject to change): Multiple.
Check Stock

80Pcs M8x1.25 Threaded Inserts Stainless Steel Spiral Helical Thread Insertion Kit

  • GOOD CONNECTION PERFORMANCE: Steel thread inserts used in low-strength materials such as aluminum and magnesium can avoid thread damage and obtain good connection performance, thereby improving connection strength and improving connection conditions..
  • WEAR RESISTANCE: Used for parts that need to be disassembled frequently, which can greatly improve the service life and wear resistance of the thread..
  • ELASTICITY: Due to a certain elasticity, the thread insert can make the load distribution on each thread uniform, eliminate the pitch and tooth deviation between the screw and the screw hole, and absorb vibration, thereby improving the thread connection strength and fatigue resistance strength..
  • PREVENT LOOSENING: Wire sleeve thread repair insert can prevent loosening of screws, especially for products requiring high safety factor..
  • EASY TO MAINTAIN: Insert the thread into a damaged screw hole, and then use the screw hole normally to avoid the loss of the workpiece..
Check Stock

Evaty 5 Pack Aluminum Alloy Metal Stand Base Holder (Silver)

  • 1pcs Thick Acrylic stand display for 510 screw thread RDA tank, 9pcs silicon anti-slip ring , the 9pcs silicone suits for different size of tank ..
  • there are 9pcs 510 screw thread for RDA tanks , 9pcs silicone anti-slip rings (3pcs in 25mm diameter , 3pcs in 22mm diameter , 3pcs in 18mm diameter ).
  • the 9 holes are with 510 thread screw , it suits any 510 thread screw tank.
  • screw the 510 RDA tank on the stand . it will not fall off , keep your tanks all standing in order .NOT in a mess ..
Check Stock

HUIZHU Acrylic Desk Holder with 510 Thread Screw for 510 RDA Tank

  • 1pcs Thick Acrylic stand display for 510 screw thread RDA tank, 9pcs silicon anti-slip ring , the 9pcs silicone suits for different size of tank ..
  • there are 9pcs 510 screw thread for RDA tanks , 9pcs silicone anti-slip rings (3pcs in 25mm diameter , 3pcs in 22mm diameter , 3pcs in 18mm diameter ).
  • the 9 holes are with 510 thread screw , it suits any 510 thread screw tank.
  • screw the 510 RDA tank on the stand . it will not fall off , keep your tanks all standing in order .NOT in a mess ..
Check Stock

1/4-20 Brass Push in Threaded Insert 0.5\ Long (50 pcs)

  • 【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
  • 【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
  • 【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
  • 【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
  • 【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..
Check Stock

Black Bolt Gauge SAE Metric Check a Thread Size FastenerLine 901303

  • 29° ACME Thread Gauge-The 29 degree stainless steel acme thread gauge is a single piece type and it is applied to measure thread and external thread tooth pitch.The acme thread gauge range:1-10TPI,the pitch:1,1-1/3,1-1/2,1-3/4,2,2-1/2,3,4,5,6,7,8,9,10.
  • Suitable for-Standard gauge for check the angle of screw cutting tools,check the width of screw cutting tools and set the position of screw cutting tools.
  • Material of stainless steel-This acme thread gauge is made by stainless steel.Not easy to rust and not easy to bend.You needn’t to use anti-rust oil or take any anti-rust ways.Just put the 29 degree acme thread gauge in a dry place and it won’t rust.
  • Clear scales-All the scales on the acme screw gauge are laser engraving,not painting and the acme thread gauge is not the copy of laser engraving. Don’t worry about the long friction will make the scale unclear.
  • Quality after-sale Service- If you are experiencing quality issues or any problems when you receive this acme thread gauge, please feel free to contact our customer service in time and let us know the issue. We offer further solution for you to your satisfaction.
Check Stock