Categories

Best Screw Thread Insert Taps

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
  • 【Checking】Check that the thread and pitch of the tap and the bolt match..
  • 【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
  • 【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
  • 【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
Check Stock

7/16-14 Oversized Big-SERT Kit cast Iron Big or Small Block Thread Repair p/n 5761E

  • This Thread Repair kit is Used to Repair or Replace Damaged or Stripped Internal Screw Threads.Suitable for engine repair and other automotive applications..
  • Sae: The kit Has Altogether 243 Pieces including insert installations, wire thread inserts, twist drill bits, thread taps, lug breaking tools ,thread gauge and adjustable tap wrench handle that allow you to have a smooth repairing experience.All Made According to Professional Standard..
  • All tools were packed in a convenient carrying case, easy and fast in collecting and placing the tools. Each accessory has its place, inserts will even be packaged in separate boxes..
  • Creates stronger internal thread in soft materials.Also come with detailed instructions..
  • Don't bother to spend a lot of money on a variety of models,all you need is our kit.Once for all..
Check Stock

SWANLAKE 166PCS Thread Repair Tool Kit,HSS Drill Helicoil Repair Kit Metric M5 M6 M8 M10 M12

  • 1.This 166pcs Thread Repair kit is for repairing damaged or stripped Internal screw threads..
  • 2.Set includes :5 installation tools,5 break pin tools,5 twist drills ,5 taps,1 hex key and 145pcs wire thread inserts (M5,M6,M8,M10,M12)..
  • 3. The installation tools in this kit is made by high-speed steel for superior handling.one HSS tap for each size, one HSS drill for each size, 2 Insert tools for each size, Thread Inserts for each size..
  • 4.The kit has 166 Pieces, all made according to professional standard.its suitable for engine repair and other automotive applications..
  • 5.It packed in a convenient steel carrying case, easy and fast in storage..
Check Stock

Allied Titanium 0077595, (Pack of 5) 1/4-20 X 1/2 inch Titanium Socket Drive Threaded Insert, 3/8-16 Ext, Grade 5 (Ti-6Al-4V)

  • This kit was a good price and contained 7 specification 14 kinds of products for use.7 sizes of 2D screw sets:M3,M4,M5,M6,M8,M10,M12.
  • Corresponding to 7 types of taps:M3,M4,M5,M6,M8,M10,M12,Total 78pcs.Can meet your needs for different specifications..
  • The tools Widely used for hand tapping taps,adjustable forward and reverse,ratchet rotation,compact and convenient,widely used in industry and life,plays a great role.The wire thread insert enjoys a reputation in manufacturing fields such as aviation,automobiles,steam turbines,electronic communications,computers,lamps,molds,mechanical equipment,radiators and semiconductor equipment..
  • Wire Thread Inserts:304 stainless steel,sturdy and durable,not easy to damage.Wire cone:Alloy steel,suitable for most metal materials and hard plastic wood etc,not suitable for materials such as stainless steel..
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair.Perfect set for the professional craftsman..
  • All the small parts are packed in a transparent plastic box with compartments, which is convenient to carry, store or reuse as a backup kit..
Check Stock

AKM 243Pc Thread Repair Kit, HSS Drill Helicoil Repair Kit SAE with Adjustable Die Wrench and Thread Gauge，1/4\ 5/16\ 3/8\ 7/16\ 1/2\ Kit

  • This Thread Repair kit is Used to Repair or Replace Damaged or Stripped Internal Screw Threads.Suitable for engine repair and other automotive applications..
  • Sae: The kit Has Altogether 243 Pieces including insert installations, wire thread inserts, twist drill bits, thread taps, lug breaking tools ,thread gauge and adjustable tap wrench handle that allow you to have a smooth repairing experience.All Made According to Professional Standard..
  • All tools were packed in a convenient carrying case, easy and fast in collecting and placing the tools. Each accessory has its place, inserts will even be packaged in separate boxes..
  • Creates stronger internal thread in soft materials.Also come with detailed instructions..
  • Don't bother to spend a lot of money on a variety of models,all you need is our kit.Once for all..
Check Stock

Orion Motor Tech 131pcs Metric Thread Repair Kit, HSS Drill Helicoil Kit mm, M5 M6 M8 M10 M12

  • This Thread Repair kit is Used to Repair or Replace Damaged or Stripped Internal Screw Threads.Suitable for engine repair and other automotive applications..
  • Sae&Metric: The kit Has Altogether 261 Pieces including insert installations, wire thread inserts, twist drill bits, thread taps, lug breaking tools that allow you to have a smooth repairing experience.All Made According to Professional Standard..
  • All tools were packed in a convenient carrying case, easy and fast in collecting and placing the tools. Each accessory has its place, inserts will even be packaged in separate boxes..
  • Creates stronger internal thread in soft materials.Also come with detailed instructions.Note:please read the listing carefully,this kit doesn't include the adjustable die wrench,if you want a die wrench you can choice our sae type:B09BMPJDB7..
  • Don't bother to spend a lot of money on a variety of models,all you need is our kit.Once for all..
Check Stock

NEIKO 04204A Hex Head Multi-Spline Screw and Bolt Extractor Set | 25 Piece Easy Out Screw Extraction | Broken Bolt remover | 1/8” to 7/8” in 1/32” Increment | Cr-Mo | Stripped Fastener Tool

  • For helical coil wire screw thread insert taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B Class High Speed Steel Screw Thread Threading Milling Taps Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock

uxcell Machine Tap 10-32 UNF Thread H2 Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-20 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 2pcs

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock