Categories

Best Screw Thread Tube

34pcs Black Pipe Post Bolt Screw Rubber Thread Protector Cover Vinyl Tube End Caps,Assorted 1/4-inch to 7/8-inch-5 Sizes

  • 34PCS– Assorted 1/4" to 1-1/2" Black Vinyl Round End Cap Cover for Pipe Plastic Tube Hub Caps Tubing Bolt Screw Rubber Thread Protector Safety Cover 6 sizes: 1/4"(10pcs), 3/8"(10pcs), 1/2"(5pcs), 3/4"(4pcs),7/8"(5pcs),Total 34pcs..
  • Slide these flexible caps on and they conform for a snug fit. Black Vinyl Round Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover.
  • The caps are 1" tall / deep for 7/8" and 13/16" tall for 1/4.
Check Stock

54pcs Black Pipe Post Bolt Screw Rubber Thread Protector Cover Vinyl Tube End Caps,Assorted 1/4-inch to 1 1/2-inch-6 Sizes

  • 54PCS– Assorted 1/4" to 1-1/2" Black Vinyl Round End Cap Cover for Pipe Plastic Tube Hub Caps Tubing Bolt Screw Rubber Thread Protector Safety Cover 6 sizes: 1/4"(20pcs), 3/8"(10pcs), 1/2"(10pcs), 3/4"(5pcs),7/8"(5pcs),1-1/2"(4pcs),Total 54pcs..
  • Slide these flexible caps on and they conform for a snug fit. Black Vinyl Round Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover.
  • The caps are 1" tall / deep for 7/8" and 1-1/2" sizes and 13/16" tall for 1/4.
Check Stock

Hard-to-Find Fastener 014973238124 Double Expansion Shields, 5/8, Piece-10

  • Product Name: Airplane Expansion Tube Anchor.
  • Package Content: 10 x Airplane Expansion Tube Anchor , 10 x Screws.
  • Plastic Anchor Size: 32 x 50 x 14mm/1.3" x 2" x 0.55"(L*W*T).
  • Screw SIze: 50 x 8mm/2" x 0.31"(L*Head Dia).
Check Stock

RLECS 2PCS M06 Circle Crossbar Metal Ceiling Light Fixture Universal Circle Cross Bars with Screws, 4 Inches

  • These mounting clips are mainly for holding T8 type LED fluorescent tubes on the wall or ceiling floor. Widely used for home, office, under-counter, outdoor, restaurant, or any other area..
  • Overall Size: 35x22x10mm / 1.38"x0.87"x0.39".
  • Made from stainless steel materials with plastic cover, with good temperature and rust resistance, long service life. Thread mounting design can help to fix the LED tube firmly..
  • Easy to use, snap the LED tube in then fix it with a screw. (Screw is not included here).
  • Please check the size of your LED fluorescent tubes before buying..
Check Stock

Manbily Gimbal Extension Pole Aluminium Tripod Centre Column Extension Rod 1/4 Thread 2 Section Tube for DJI OSMO Mobile 2 Zhiyun Smooth 4/Q Monopod DSLR Camera Phone Photo Selfies Video Vlog

  • 【Universal 1/4" to 3/8" Screw】The tripod extension rod can be auto-switched between 1/4" and 3/8" thread by pressing down the outer screw for....
  • 【Stability & Solid】This tripod center column extension tube is made of high quality CNC processing aluminum alloy,which is....
  • 【2-Section Extension Rod】The extension tube has 2 sections designed,quickly loosen the twist lock to adjust length between 10.4 inch to 17.3....
  • 【Wide Application】Aluminum alloy extension rod compatible with tripods, monopods, selfie sticks, and cellphone stabilizers.Various gimbal....
  • 【What You Get】 1 x Tripod Extension Tube. PLEASE NOT: Other accessories are Not included..
Check Stock

FOTOBETTER 2 Section Carbon Fiber Tripod Extension Tube,Tripod Center Column Tripod Extender, Gimbal Extension Pole Handheld Extension Bar Telescopic Stick Rod for Tripod/Monopod/DSLR Camera

  • The ET-C252 tripod extension tube is made of W/8 layer woven carbon. The main body is solid aluminum CNC machining and three-stage oxidation. It is light and stable and is suitable for most tripods on the market, increasing the height of the tripod and increasing the photographic field of view..
  • Tripod Extender Use 40mm extended friction plates to increase the overlap between the legs and ensure stability and continuity when the leg is stretched.
  • 1/4" & 3/8" Compatible Screw - Just by pressing, the screw on the top plate can be easily converted from 3/8" to 1/4"..
  • With 3/8" thread on the bottom is suitable for most tripods on the market and is delivered with a 1/4 conversion screw..
  • What You Get：ET-C252 Tripod Extension Tube,1/4" to 3/8" Bushing Adapters, friendly customer Service..
Check Stock

Boseen Mic Stand Extension Tube, 5/8' Female to 5/8' Male Microphone Extension Pipe for Desk Stands & Arm Stand, 2Pcs

  • Extension Tube - This extension tube extend the length of your boom arm or the height of your mic stand, which moves the connection farther and allows the microphone to be as close to you as possible for better recording..
  • Wide Application - The package includes a 5/8" male to a 3/8" female metal adapter and a rod which has a 5/8" male thread on one end and a 5/8" female thread on the other end, both together can fit the most boom arms, mic stands, shock mounts and most microphones, such as Shure SM7b, Shure MV7, Rode Podmic, Blue Yeti Snowball, etc..
  • High Quality Material - It has black powder-coated finish and it is made of aluminum alloy, which makes the tube strong and stable without losing compact and lightweight. So you don't need to worry about the microphone falling off during use..
  • Easy to Install - Just screw the entension rod and the metal adapter if you need onto your boom arm or microphone stand or other..
  • Best Service - We promise to provide timely response within 24 hours and lifelong technical guidance..
Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • Gas Can Spout Replacement kit,Suitable for most 1/2/5/10 gallon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
Check Stock

FixtureDisplays® 24-Pocket 5.5\ Wide Pocket (Fits 5x7\) Vertical Greeting Card Display Spinning Greeting Holiday Card Rack Floor Stand Pocket Size: 5.8\Wide X 8\High, 24 Pockets. 11703-Wht-NPF

  • 【6" pocket Fits 5X7" Greeting Cards】Great display rack for Christmas, Birthdays, Graduation, Valentine’s Day greeting cards, CDs, DVDs, Prints, Pamphlets, Small books....
  • 【15X15 Small Footprint 60" Tall, Takes up little space】Pockets Measurements: 6"W x 4.8"H x 1.2"D, fits cards up to 8" tall. Professionl looking for display at book stores, gift shops, coffee shops, souvenir stores, arts and crafts trade-shows, art fairs....
  • 【24 Full view pockets】6 pockets on each side. Has a pigtail sign clip on the top for a message card (cards not included). The display rack spins for easy browsing and loading..
  • 【Sturdy rack on wheels】 Steel wire and tube construction, poowder coated white finish & rests in a strong metal base. Lightweight and easy to move around with castors. Totally portable..
  • 【Full length assembly video】Trouble free assemble video: https://youtu.be/yveDpkvWQOs. Or search "11703 card rack" on youtube. Tips: Panel back lower hook sits on lower hub, upper hub fits into panel upper hook to hold it in place. Upper tube locks to lower tube with set screw. Screw works against outer tube thread, push inner tube in to lock. Don't need a nut, don't need through hole either..
Check Stock

1/4\ -20 x 1-1/2\ Hanger Bolts, 8 pack

  • Machine Screw Thread Length: 17mm / 0.67".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock

Seymour STR-662 1\ STA-LOK Repair Kit

  • Easy to use,convenient to operate,saves effort and time in use..
  • Using thread insert to convert mm---inch screw hole, it is convenient and fast..
  • The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
  • When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
  • Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiator, etc.
  • Parts thread hole repair, such as injection molding machine template thread hole repair.
  • Imported equipment or machinery thread dam.
Check Stock

The Hillman Group 491410 Hanger Bolt, 8-32 X 1-1/2-Inch , 8-Pack

  • Machine Screw Thread Length: 22mm / 0.87".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture jointing. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock

INTERTOOL Spray Foam Gun, Insulation Expanding Sealant Applicator, PTFE Non-Stick Coated Basket and Tip PT-0604

  • [Reusable Foam Dispenser]: Heavy duty stainless steel foam dispensing gun ideal for applying polyurethane insulation and sealant foam. Thoroughly clean when canister is removed for optimal performance.
  • [Less Mess and Wasted Foam]: Includes easy turn flow control knob for adjustable and precise bead size. Dispenses only the amount you need and reduces foam waste and overspray. Plus 4 tip attachments.
  • [Easy Clean Material]: PTFE non-stick coated basket connector and barrel tip makes it easy to clean off foam preventing foam curation and clogging.
  • [Twist-on Can Compatible]: Gun intended for use with twist-on foam sealant and cleaner cans, such as Great Stuff Pro 24oz screw-on canisters. Simply align the canister thread with the gun basket thread and screw on until secured. NOT compatible with straw or tube tipped canisters.
  • [INTERTOOL has YOU Covered]: We are always available to quickly resolve any issue and answer to your needs. Our community is our #1 priority.
Check Stock