Categories

Best Screw Truss

Amerock BP36767G10 Winsome Cabinet Pull, 5-1/16 in. Center-to-Center, Satin Nickel

  • 5-1/16 in (128 mm) Center-to-Center Pull.
  • Intricately crafted with precise detail for lifelong beauty and durability.
  • Includes mounting hardware: #8-32 x 1 in. Truss Head Machine Screw & #8-32 x 1-1/2 in. Truss Head Machine Screw.
  • Complete with Amerock Guardian Lifetime Guarantee against defect in material and workmanship.
Check Stock

Amerock BP36562PNSS Esquire Cabinet Pull, 8 in (203 mm) Center-to-Center, Polished Nickel/Stainless Steel

  • Finished in Polished Nickel/Stainless Steel.
  • Includes mounting hardware: #8-32 x 1 in. Truss Head Machine Screw & #8-32 x 1-1/2 in. Truss Head Machine Screw.
  • Complete with Amerock Guardian Lifetime Guarantee against defect in material and workmanship.
Check Stock

Amerock BP36650BBZ26 London Cabinet Pull, 6-5/16 in. Center-to-Center, Golden Champagne/Polished Chrome

  • 6-5/16 in (160 mm) Center-to-Center Pull.
  • Finished in Golden Champagne/Polished Chrome.
  • Includes mounting hardware: #8-32 x 1 in. Truss Head Machine Screw & #8-32 x 1-1/2 in. Truss Head Machine Screw.
  • Complete with Amerock Guardian Lifetime Guarantee against defect in material and workmanship.
Check Stock

ENGINEER PZ-58 Screw Removal Pliers Extractor Pliers (Combination Pliers), with unique non-slip jaws for quickly removal of damaged or rusted fasteners

  • Squeeze and turn crushed screws, rusted screws, fixed screws, special screws, etc.
  • [Backing] Can also be used for removing gas cans, sorting soy sauce bottles and plastic bottles.
  • International patented tip shape allows for low head screws (truss screws).
  • It has a blade so it can also be cut through wires.
  • Adopts an elastomer soft grip that is environmentally friendly and hand friendly.
  • T-shaped grip section, lighter and more resistant to twisting.
  • [Approximate Screw Removable] Tip job: Screw head diameter 0.1 - 0.4 inch (3 - 9.5 mm) (truss screw: M2 - 4 / Pan screw: M1.6 - 5) / Body jaw part: Screw head diameter 0.2 - 0.4 inch (5.5 - 10 mm) (pan screw: M3 - 5).
  • Product Specifications: Size: 6.3 x 2.1 x 0.6 inches (160 x 54 x 15 mm).
  • Cutting Capacity: Copper wire Φ0.05 inches (1.2 mm).
  • Uses: For maintenance of cars, motorcycles, equipment, bicycles, radio controls, etc.
Check Stock

Amerock | Cabinet Pull | Champagne Bronze | 7-9/16 inch (192 mm) Center-to-Center | Factor | 1 Pack | Drawer Pull | Cabinet Handle | Cabinet Hardware

  • 7-9/16 in (192 mm) Center-to-Center Pull.
  • Intricately crafted with precise detail for lifelong beauty and durability.
  • Includes mounting hardware: #8-32 x 1 in. Truss Head Machine Screw & #8-32 x 1-1/2 in. Truss Head Machine Screw.
  • Complete with Amerock Guardian Lifetime Guarantee against defect in material and workmanship.
Check Stock

Amerock | Cabinet Pull | Champagne Bronze | 8-13/16 inch (224 mm) Center-to-Center | Destine | 1 Pack | Drawer Pull | Cabinet Handle | Cabinet Hardware

  • 8-13/16 in (224 mm) Center-to-Center Pull.
  • Intricately crafted with precise detail for lifelong beauty and durability.
  • Includes mounting hardware: #8-32 x 1 in. Truss Head Machine Screw & #8-32 x 1-1/2 in. Truss Head Machine Screw.
  • Complete with Amerock Guardian Lifetime Guarantee against defect in material and workmanship.
Check Stock

Amerock | Cabinet Pull | Champagne Bronze | 5-1/16 inch (128 mm) Center-to-Center | Caliber | 1 Pack | Drawer Pull | Cabinet Handle | Cabinet Hardware

  • 5-1/16 in (128 mm) Center-to-Center Pull.
  • Intricately crafted with precise detail for lifelong beauty and durability.
  • Includes mounting hardware: #8-32 x 1 in. Truss Head Machine Screw & #8-32 x 1-1/2 in. Truss Head Machine Screw.
  • Complete with Amerock Guardian Lifetime Guarantee against defect in material and workmanship.
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

El Tornillo Y La Tuerca

  • √ [More US Models, K Kwokker Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
  • √ [More Quantity, More Economical, 651Pcs Truss Head Machine Screws, Bolts Nuts and Washer Assortment Kit] Includes: A.8-32 machine screw: Screw: 25pcs 8-32*1 1/2", 25pcs 8-32*3/4", 25pcs 8-32*1/2", 100pcs flat washers, 100pcs nuts.
  • B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2", 25pcs 6-32*3/4", 25pcs 6-32*1/2", 100pcs flat washers, 100pcs nuts.
  • √ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
  • [Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
  • √ [Come With A High Hardness Storage Box, Easy To Use And Stor....
Check Stock

MIECOO 17PCS Guitar Truss Rod Allen Wrench Set, Includes 7mm & 8mm Truss Rod Hex Box Wrenches and 4mm, 5mm, 6mm Lengthened Ball End Truss Rod Wrenches Repair Tool and Guitar Spanner Wrench

  • ... easier access to truss rod cavity and easily tighten or loosen the truss rod of your guitar..
  • 【3PCS SILVER LENGTHENED WRENCHES】set of 3 including different size: 4.0mm, 5.0mm, 6.0mm. Reach deep areas easily by using the ball end and apply higher force effortlessly by using the short end. Used to drive bolts and screws with a hexagonal head. Use for locking hexagonal screws, adjusting guitar neck truss rod efficiently, etc..
  • 【GUITAR MULTI SPANNER WRENCH】made of stainless steel & durable. Used to tighten or loosen most nuts or thumb wheels found on guitars, like output jack, control pot, pickup switch, volume control knob, tuning machine head, etc..
  • 【2PCS BALL END TRUSS ROD WRENCHES & 9PCS ALLEN WRENCHES】made of carbon steel & durable. 4mm & 5mm ball end truss rod wrenches are used to adjust the guitar neck straight, suitable for martin acoustic guitar or other guitar which couldn't reach it with a regular hex wrench truss rod adjustment. 9Pcs various guitar allen wrench gauges are suitable for most guitar bass neck, bridge, nut locking, volume knob, bridge string block screw adjustment..
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Glarks 120Pcs #8 x 5/8\ Phillips Modified Truss Head Wood Screws, Black Zinc Plated Carbon Steel Self Tapping Sheet Metal Screws Set

  • ♛【Package Includes】: You'll receive 120pcs #8 x 5/8" modified truss head wood screws in total. Sufficient quantities are enough for your different daily use at home and office..
  • ♛【High Quality Material】: Our truss head self tapping wood screws are made of high quality carbon steel, black zinc plating gives screws higher corrosion resistance and rust resistance for long service life, not easy to break or deform, and can fit different indoor and outdoor environments..
  • ♛【Sharp Tip Design】: This phillips truss head self tapping screw with sharp tip and deep thread can easily penetrate a variety of materials and achieve tight connecting, which provides better holding power to get the job done easily..
  • ♛【Easy to Use】: No need to pre-drill or drill hole, simply use self-tapping screw to rotate into the product without using nut to cooperate. It can reach a remarkable effect of connecting and fastening..
  • ♛【Wide Application】: These screws can be applied to plastic, wood and soft materials, suitable for repairing fasteners in shops, garages or household furniture. Mainly used in manufacturing, construction, engineering, machinery and other industries..
Check Stock