Categories

Best Screws For Cement Board

Simpson Strong-Tie FT18250C25 3/16\FlipToggle Anchor with 2-1/2\ Bolt, 25ct

  • ...back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
  • 【PACKAGE】--- All of toggle bolts and wing nuts are packed in a durable and sturdy Box to efficiently bear the weight of the whole package. In order to avoid the screws being scattered or lost during use, we specially package for each different type of screws for your convenience and storage. Not only give you the best product, but also the best storage system for them..
  • 【WIDE APPLICATIONS】--- Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches, what’s more, the product is highly adaptable, it can be installed quickly with a normal screwdriver..
Check Stock

CondoMounts Heavy Duty 19-Piece 90lbs NO Stud Drywall or Metal Stud Mounting Kit for TV Frame TV No Gap Mount Mounting kit.

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • FRAME TV MOUNTING KIT : Perfect for Mounting Frame TV Mount directly on drywall without the need for studs. 3/16 screws fit frame tv NO gap wall mount..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • FULL PACKAGE- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
Check Stock

Toggle Bolt HSCGIN 24PCS M4 Stainless Steel Toggle Bolt and Wing Nut Kit Round Head Butterfly Drywall Anchor Toggle Wing Nut Bolt

  • Toggle Bolt and Wing Nut Kit. Color: Silver. Material: Stainless Steel..
  • Sturdy and well-made: high quality stainless steel anchors, environmentally friendly materials. Stainless steel can be used in wet environments and will last for a long time. We offer great toggle bolt kits..
  • How to apply this kit: First, you'll need to drill a hole (large enough to go through the folded spring wings), then thread these toggle bolts through the hole. At this point the wings are released and clamped inside, then the bolts are pulled down to tighten, taking care to leave enough room for the wings to loosen. Finally, it is best to use an electric screwdriver to screw in the screws..
  • Wide compatibility: widely used in hollow substrates such as hollow brick, gypsum board, fiber cement board, wood board, etc., suitable for installing lamps, curtain rods, photo frames, coat racks, power switches and other lamps..
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • ...- Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
  • VIDEO INSTRUCTIONS & SUPPORT : Over 10 Videos to help you mount different items safely..
  • FULL PACKAGE : Hex Shank Drill bit, screws, washers are included so you DONT need to to buy them separately..
  • METAL STUD : Can be used for mounting on Metal stud walls.
Check Stock

Hitachi 18106 10-Inch Polycrystalline Diamond Dry Cutting Hardiblade Saw Blade 6-Teeth

  • More durable than traditional carbide blades.
  • Made for cross cutting fiber cement board.
Check Stock

Redneck Convent Paddleboard SUP Wall Mount Rack 2-Pack (Pair) Paddle Board, Longboard, Surfboard, Snowboard, Garage Storage Hanger Hook

  • ...d, body board, small canoe, or even ladder for indoor or outdoor storage in your garage, shop, storage room, showroom, on the side of your house, on your deck, or near your dock.
  • Frees up space on the ground with enough room to still park your car in the garage.
  • EASY INSTALLATION: Comes with installation hardware (4 screws and 4 ribbed plastic screw anchor clips) for a quick and simple mounting experience.
  • BUILT TO LAST: Constructed from heavy-duty powder-coated steel with foam padding to protect the surface of your paddleboard.
  • Will hold 2 paddleboards indoors or outdoors and will not cause bows in your board like other hanging models.
  • CONTENTS: Package includes a pair (2) of hangers and installation hardware (4 screws, 4 ribbed anchors).
  • Size of each rack is approximately 11.5 inches tall x 23.75 inches wide with 1.5-inch thick steel tube outer diameter (OD) (29.2cm x 60.3cm x 3.8cm).
Check Stock

TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8\ to 2-1/2\ Grip Range, For 3/8\-16 UNC Fastener Size (Pack of 25)

  • Practical Kit: Zinc plated steel round head is used for hanging and fixing heavy objects. It is easy to use and bring more convenience to your life.
  • Premium Material: This toggle bolt and wing nut kit is made of high quality zinc plated steel which is strong and sturdy and offers good corrosion resistance and rust resistance in bad environment like high temperature, cold weather, and high humidity areas.
  • Wide compatibility: Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches.
  • Three Sizes: We have prepared 3 sizes of toggle bolt and wing nut kit, a complete kit, for you to meet different needs in your daily life.
  • What You Get: 1/8inch: 8pcs, 3/16inch: 8pcs, 1/4inch: 8Pcs, Lenink butterfly screws anchor drywall provide you with a more convenient driling way. Please feel free to contact us if you have any problem.
Check Stock

Tape Fiberglas Cement 3inx50ft

  • Long-lasting, alkali-resistant mesh will withstand corrosive effects of the alkaline present in cement board joint finishing, lightweight concrete panel seaming and crack repair, block foundation, and reinforcement for fiber cement, and concrete stucco. Heavier fiberglass yarns for more strength than regular mesh tapes..
Check Stock

SHALL 5/16” (8 mm) Fiber Cement Siding Shear Blades Replacement Set, for Shall Electric Fiber Cement Siding Shear (SH111007AE), Clean Cut for Cement Board, Tile Board, Backer board

  • Product dimension: Left blade & right blade: 4-7/8” X 3/14’’ (12.5 cm X 1.9 cm).
  • center blade: 5-5/8’’ X 2’’ (14.3 cm X 5 cm).
  • hex bolts length: 1-7/16’’ (3.6 cm). Compatible with SHALL (SH111007AE) and other electric fiber cement siding shear that have the same structure and size of cutter head.
  • Cutting capacity: Cutting up to 5/16” (8 mm) cement board, tile board, backer board and etc. In addition, applicable for cutting cement board, hardie backerboard, shower backerboard, waterproof backerboard and so on. Multi-functional, meeting most of your cutting needs.
  • Double-cut blade: Double cut design for creating a 5/16” (8 mm) curled thin strip, delivering fast clean cut without creating extra wastes and air-borne dust, smooth as silk. Besides, this replacement’s advantages are flexibility in cutting curves, efficiency, accuracy, durability and quality finish.
  • Premium material: Blades are made of superior alloy steel, anti-rusting. Heat-treated: 55-60HRC. High strength bolts (Specification: M5, Strength: 12.9).
  • What including: 3 blades (left blade, center blade, right blade), 2 bushings, 3 head bolts.
Check Stock

48PCS 4 Size Anti Scratch Screw-on Round Black Rubber Feet Bumpers Pads W/Matching Screws & Built-in Stainless-Steel Washer Carpet Floor Protectors for Cutting Board Amps Cabinet Tables Chair Sofa

  • 【SUITABLE FOR ANY MOST FURNITURE】Our surprising rubber feet pads are great protectors for guitar amp, speaker, cabinet desk, tables, sofa, couches and electronics & appliances, also fit for cutting board, lift the board up and keeping it dry and reducing warping..
  • 【4 SIZES PADS & SCREWS 】Various size with 0.59×0.31″(15*8mm), 0.75×0.43″(19*11mm), 0.98 ×0.51″(25*13mm), 1.18×0.59″(30*15mm). Each size comes with matching screw, you do not need to find screw anymore.
  • various size for your choice to accommodate different needs for nailing on various items, easy installation by drilling pilot hole at the furniture, then screw on the pad along the drill hole by screwdriver..
  • 【GREAT VALUE PACKAGE】Each anti scratch furniture pads set includes 12PCS of each size (4 SIZES) rubber bumper pads and stainless steel matching screws for you to use, total 48PCS pads and screws, enough pads for your all home furniture use..
Check Stock

200lbs Metal Stud Wall & Drywall TV Mounting Kit for TV Mounts - Includes 4 Elephant Anchors, Titanium Drill Bit and TV Mounting Hardware

  • METAL/STEEL STUD WALL MOUNTING KIT. Complete mouting kit to facilitates secure & easy installation of TVs or other objects on metal/steel studs or drywall. Metal studs are common in home basements, above fireplaces, extensions, condominiums, home additions, apartments and commercial construction..
  • STUD NOT REQUIRED. Break strength 200lbs . The 4 Pieces of Elephant Anchors provided can be used on Gypsum board, Drywall, Tile over drywall, Plasterboard, Composite panels, Cement board, Plaster, Stucco..
  • COMPLETE KIT – One 1/2″ hex socket titanium drill bit, 4pcs of ¼ -20hollow wall toggle anchors, 4pcs of ¼-20 x 2’’ screws, 4pcs of ¼’’ washer. NO trips to Home Depot or Lowes..
  • OTHER MOUNTING USE – Wall Mounting of Shelves, Wall Mounting of Cabinets, Wall Mounting Bathroom Accessories, Wall Mounting Grab Bar, Mounting Vanity, Draperies, Curtain Rods, Blinds and Mirrors when studs are not an option..
  • NEATLY LABELED PACKAGING & MANUAL– The components in this package is separated by different use, the instruction manual is also included.
Check Stock

E-outstanding 10pcs M4x60mm Hollow Wall Anchors Molly Bolts/Metal Cavity Anchor/Cavity Fixing Anchor for Secure Drywall, Sheetrock, Plaster

  • Package included:10pcs Hollow Wall Anchor Screws. Size: M4x60mm..
  • Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and security..
  • Material: Made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items..
  • Application: Widely used in drywall, hollow block, plaster, tile, gypsum cardboard, gypsum fiberboard, fiber cement board, partition walls,etc..
  • Easy to use, high strength and hardness. Expands when screw is tightened to grip against the wall..
Check Stock

No Damage Hook - The only Hooks for Fiber Cement Board siding That Does not Require Drilling. 4 Hooks with Installation Tool Included.

  • Finally, a way to hang items on your fiber cement board siding without drilling!.
  • Installation video: https://youtu.be/6RutcQ1IBhw.
  • These hooks are made in the USA and are patent pending..
  • Hang items on your fiber cement board siding without drilling or any other damage..
Check Stock