Categories

Best Scsi Sas Server Drives

Cable Matters Internal Mini SAS to SAS Cable 1.6 Feet, 0.5m (SFF-8087 to SFF-8482)

  • Mini SAS 36 (SFF-8087) Male Connect to the Host/Controller, 4x SAS 29 connect to the Target/Devices..
  • 4x SAS 29 female with extra 4 pole power. Multiple lanes support current speed of up to 6.0 Gbps through a single cable..
  • Point-to-point SCSI makes setting up SCSI easier than ever..
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access..
Check Stock

SinLoon SCA 80 Pin to 68 50 Pin SCSI Adapter SCSI 68 Female Adapter SCSI 80 Male Adapter for Data Transfer (50/68/80)

  • Product Name: SCSI three card 68-80-50 ide SCSI hard disk adapter 68 Pin Female to 80 Pin Male to 50 pin IDE (SCSI 80 pin, 68 pin, 50 pin adapter).
  • SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 50 pin interface to 68 pin interface. In this way, 50 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
  • SCSI Three Turn Card. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
  • The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
  • Note: It's a 50 pin IDE,Only available on industrial server IDE 50-pin motherboards. not a 40 pin or 44 pin ide of an ordinary computer. It can't be used on an ordinary computer. Please pay attention!.
Check Stock

EDIMS Internal Mini SAS Cable 36 Pin Mini SAS 4i SFF-8087 Male to 4xSAS 29 SFF-8482 Female for SAS Server, Raid Card,3.3FT

  • External Mini SAS 26Pin (SFF-8088) to 4x 7Pin Sata female Cable.
  • It has an external 26-pin SFF-8088 male Mini-SAS plug (with release ring) on one end and 4x 7Pin Sata on the other.
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers, the SAS interface is backwards compatible with SATA.
  • Mini SAS guarantees performance at 3.0 Gigabits per second. This SAS cable features Mini SAS type SFF-8088 connectors and Internal SATA connectors. This cable connects a to SFF-8088 Mini SAS Controller directly to 4 SATA drives.
Check Stock

Dell 4HGTJ 600GB 15K SAS 2.5" 12Gb/s Hard Drive with 13TH Generation Tray

  • This SFF drive uses a 12Gb/s SAS (serial attached SCSI) interface and comes with a Manufacturer warranty..
  • SAS interface delivers High Data Transfer Speed of **12Gbps**.
  • 15K RPM Spindle Speed ensures Excellent Performance.
  • Offers 600GB Capacity to Store Large Amount of Enterprise Data.
  • 2.5″ FORM FACTOR – SFF – CHECK YOU SERVER CONFIGURATION FOR CORRECT FORM FACTOR.
Check Stock

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

  • Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives.
  • Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
  • Leverage hardware raid performance with this SATA multi-lane cable.
  • Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
  • Supports up to 6Gbs data transfer rate per drive.
  • DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
  • 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
  • Slim ribbon cables minimize airflow impact in a computer case.
  • Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
  • Woven mesh sheath covers half of the cable for easy routing.
  • P1 to P4 markers provide easy ID after installation.
  • Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce ....
Check Stock

YEECHUN 3.5

  • 【High Quality 】 100% brand new and replacement for DELL PowerEdge servers,it includes all the screws and hardware you need to install,we make our 14th Generation server trays with sturdy material,all items are TESTED before shipping..
  • 【PowerEdge 】 T310, T410, T610, T710, T320, T420, T620, T330, T430, T630, PowerVault MD1200, MD1400, MD3200, MD3200i, MD3400, MD3600i, MD3600f, NX200, NX300, NX3000, NX3100, NX3200, NF100, NF500, NF600..
  • 【Compatible Part Numbers 】0F238F, F238F, X968D, 0x968D, G302D, 0G302D, KG1CH, 0KG1CH,PowerEdge R310, R320, R410, R415, R510, R515, R610, R710, R810, R320, R420, R520, R720, R720xd, R820, R530, R630, R730, R730xd..
  • 【Package 】5 Pack SAS SATA Hard Drive Tray Caddy, 3 Years Warranty, Try them out for yourself, install to your server, and if you aren’t happy with the compatibility, or for any reason at all, then we’ll be more than happy to give you an immediate refund..
  • 【Universal 】Dell hard drive bay is universal, It should work with most DELL R and T series servers that are configured to use 3.5″ hotswap SAS/SATA drives.Only works with 3.5 inch SAS or SATA drives,NOT for 2.5 inch..
Check Stock

Mini SAS Cable with SATA Power, CableCreation Internal Mini SAS 36 Pin to 4 x 29 Pin Cord with SATA Power, SFF-8087 to SFF-8482 Cable, 3.3 FT

  • Please note that this Mini SAS (SFF-8643) to 4x SATA Cable, SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports. 4x7Pin SATA is the target , connect to the hard drives with SATA port.
  • Before you buy this cable , please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
  • SFF-8643: the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. Hybrid versions of these new cables will allow for a smooth transition from 6Gb to 12Gb.
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.
Check Stock

StorageTekPro LSI 9340-8i flashed to IT Mode = 9300-8i w/LSI P16 IT-Mode F/W for ZFS FreeNAS unRAID

  • The eight-port MegaRAID SAS 9240-8i, supports data transfer rates of up to 6Gb/s per port, brings new features and improved performance to entry-level server applications using up to 64 SATA or SAS devices..
  • RAID 0, 1, 5, 10, 50 and JBOD mode - Hardware RAID solution.
  • Hardware RAID solution x8 PCI Express 2.0 host interface Low-profile form factor Supports up to 64 physical devices Up to 16 physical devices in a RAID configuration Patrol read Consistency Check S.M.A.R.T error detection.
  • Solution Provided: Low-cost, green SATA+SAS RAID solution for high-density servers and workstations with the flexibility to use both SATA and SAS hard drives and solid state drives.
  • Selectable logical drive as boot drive Consistency Check Fast initialization for quick array setup Native Command Queuing Staggered spin up for SATA drives.
Check Stock

LSI 9240-8i 6Gbps SAS Raid Card, HBA FW:P20 9211-8i IT Mode for ZFS FreeNAS unRAID 2 SFF SATA RAID Controllers

  • The eight-port MegaRAID SAS 9240-8i, supports data transfer rates of up to 6Gb/s per port, brings new features and improved performance to entry-level server applications using up to 64 SATA or SAS devices..
  • RAID 0, 1, 5, 10, 50 and JBOD mode - Hardware RAID solution.
  • Hardware RAID solution x8 PCI Express 2.0 host interface Low-profile form factor Supports up to 64 physical devices Up to 16 physical devices in a RAID configuration Patrol read Consistency Check S.M.A.R.T error detection.
  • Solution Provided: Low-cost, green SATA+SAS RAID solution for high-density servers and workstations with the flexibility to use both SATA and SAS hard drives and solid state drives.
  • Selectable logical drive as boot drive Consistency Check Fast initialization for quick array setup Native Command Queuing Staggered spin up for SATA drives.
Check Stock

ANNNWZZD Internal Mini SAS Cable,SFF8087 36 Pin to SFF8087 36Pin Data Cable,Mini-SAS to Mini-SAS Cable (3FT/1M)

  • 【Kindly Reminder】Please note: this cable can ❌ Not work with SAS Driver. Internal Mini SAS 36pin SFF-8087 to (4) 29pin SFF-8482 connectors with SATA Power.
  • 【Mini SAS to SAS Cable】Mini SAS 36 pin (SFF-8087) connect to the controller, 4 x SAS connect to the HDD (Hard Disc Driver).
  • 【36 Pin to 29 Pin Cable】Mini SAS 36 pin is Host, 4 x SAS 29 pin is target, Internal mini Serial Attached SCSI x 4 (SFF-8087) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
  • 【Controller to SATA Disks】Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482).
  • 【What You Get】1 x 3.3 FT CableCreation SFF-8087 to SFF-8482 Cable. Backed with 24 Months Warranty and lifetime technical service.
Check Stock

EDIMS Mini SAS to SAS Cable Internal Breakout Cable SFF-8087 to SFF-8482 with 4X Molex Power Connectors for Raid Controller to Hard Drive 3.3FT

  • Internal Mini SAS SFF-8643 to (4) 29pin SFF-8482 connectors with power connecting a SAS controller (SFF-8643) to four SATA/SAS disks (SFF-8482).
  • Please note that Mini SAS (SFF-8643) is host, 4 SAS 29 (SFF-8482) is target, internal Mini Serial Attached SCSI x4 (SFF-8643) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
  • Before you buy this cable, Please make sure the Mini SAS (SFF-8643) on your motherboard or RAID controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
  • Mini SAS (SFF-8643) connect to the controller, 4 SAS connect to the HDD (hard disc driver).
  • 30-Day return for any reason, 18-month warranty, Lifetime Technical support and friendly customer service.
Check Stock

CERRXIAN SCSI HPDB 68 Pin Female to IDE 50 Pin Female Adapter Converter

  • Designed to convert an HPDB 68pin connection into an IDE 50pin connection for hard driver..
  • Note: This is a 50-pin IDE, not a 40-pin or 44-pin IDE, and it cannot be used in ordinary computers. It can only be used on industrial server IDE 50-pin interface motherboards..
  • Use this adapter to connect old HDD or others old devices with scsi interfaces to newer tape drives or other devices..
  • The IDE connector seat uses a high-thickness gold-plated layer, which is more conductive and more stable..
  • Suitable for disks, tapes, CD-ROMs, rewritable optical drives, printers, scanners and communication equipment, etc..
Check Stock

(2Pack) 2.5

  • This tray is compatible with all HP Proliant Gen8/Gen9 servers that use 2.5″ SAS/SATA hotswap drives.
  • This tray will not work with any HP servers that use 3.5″ drives..
  • Compatible Model Number: HP ML350p DL360e DL320e DL380e SL270s 230 Gen8 G9 Gen9.
  • This tray is as fully functional as OEM part.Please make sure that your server uses the 2.5″ drive trays before ordering this. This should also fit any other new HP servers that take 2.5″ drive trays..
Check Stock