Categories

Best Seachem Ammonia Test Kit

Carhartt Men s Lightweight Hiker SteelToe Industrial Boot Black Mesh and Synthetic 12 W US

  • POWERFUL TREATMENT: Seachem Prime is a complete and concentrated conditioner for both freshwater and saltwater fish tanks, working hard to remove....
  • REMOVER: Seachem Prime immediately and permanently removes chlorine and chloramine, successfully allowing the bio filter to remove ammonia, nitrite,....
  • DETOXIFIER: Seachem Prime effectively detoxifies ammonia, nitrite, and heavy metals found in the tap water at typical concentration levels, providing....
  • USE: Use 1 capful (5 mL) of Seachem Prime for each 200 L (50 US gallons) of new or replacement water. For best results, add Seachem Prime to new water....
  • SAFETY: In case of an emergency, the 5x dose of Seachem Prime may be used for both ammonia and nitrite. Use a ½ dose if the water temperature is >....
Check Stock

Seachem Pond Prime Water Conditioner - Chemical Remover and Detoxifier 2 L

  • CONDITIONER: Seachem Pond Prime is a complete conditioner that works to provide essential ions and stimulates natural slime coat in any pond..
  • REMOVER: Use 1/8 cup (2 tablespoons) of Seachem Pond Prime for each 600-700 US gallons to successfully remove chlorine or chloramine from your fish’s environment..
  • DETOXIFIER: Seachem Pond Prime will detoxify any ammonia or nitrite produced by fish that live in your pond. To detoxify high concentrations of ammonia or nitrite, use 1/4 to 1/2 cup for each 600 gallons..
  • USE: If you are setting up a new pond, adding, or changing water, then Seachem Pond Prime should be the first choice conditioner to create and control a safe pond environment..
  • SAFETY: To detoxify nitrite in an emergency, up to 5 times the normal dose of Seachem Pond Prime may be used. If the water temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose..
Check Stock

Seachem Pond Prime Water Conditioner - Chemical Remover and Detoxifier 20 L

  • CONDITIONER: Seachem Pond Prime is a complete conditioner that works to provide essential ions and stimulates natural slime coat in any pond..
  • REMOVER: Use 1/8 cup (2 tablespoons) of Seachem Pond Prime for each 600-700 US gallons to successfully remove chlorine or chloramine from your fish’s environment..
  • DETOXIFIER: Seachem Pond Prime will detoxify any ammonia or nitrite that live in your pond without causing a pH drop. To detoxify high concentrations of ammonia or nitrite, use 1/4 to 1/2 cup for every 600 gallons..
  • USE: If you are setting up a new pond, adding, or changing water, then Seachem Pond Prime should be the first choice conditioner to create and control a safe pond environment..
  • SAFETY: To detoxify nitrite in an emergency, up to 5 times the normal dose of Seachem Pond Prime may be used. If the water temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose..
Check Stock

Seachem Prime Fresh and Saltwater Conditioner 4 Liters with Dispenser Pump,and 10ct Pet Wipes

  • Package Include: (1) 4 Liters Seachem Prime Fresh, 1 Pump, and 10ct Pet Faves Wipes.
  • POWERFUL TREATMENT: Seachem Prime is a complete and concentrated conditioner for both freshwater and saltwater fish tanks, working hard to remove chlorine and chloramine..
  • REMOVER: Seachem Prime immediately and permanently removes chlorine and chloramine, successfully allowing the bio filter to remove ammonia, nitrite, and nitrate while they are detoxified for 48 hours..
  • DETOXIFIER: Seachem Prime effectively detoxifies ammonia, nitrite, and heavy metals found in the tap water at typical concentration levels, providing a ideal environment for your betta, tetra, or other fish..
  • USE: Use 1 capful (5 mL) of Seachem Prime for each 200 L (50 US gallons) of new or replacement water. For best results, add Seachem Prime to new water first. For exceptionally high chloramine concentrations, a double dose may be used safely. For smaller volumes, use 2 drops per gallon..
Check Stock

Seachem Zeolite Marine & Freshwater Binding Agent - Ammonia and Heavy Metals 500 mL

  • BINDER: Seachem Zeolite is a naturally occurring, highly-porous mineral that binds ammonia and heavy metals through an ion exchange mechanism..
  • REMOVER: Seachem Zeolite works in marine and freshwater to remove harmful metal ions such as lead, copper, nickel, and zinc without depleting calcium....
  • DIRECTIONS: Use 250 mL (1 cup) of Seachem Zeolite for every 200 L (50 US gallons). For smaller aquariums, the equivalent dose is 5 mL (1 level....
  • FOR BEST RESULTS: Seachem Zeolite should be rinsed before use and placed so as to maximize the flow of water through it, but not so that it tumbles....
  • SAFETY: Be sure to wash thoroughly after handling Seachem Zeolite and store this product in its original container in a cool, dry area away from food....
Check Stock

Seachem Zeolite Marine & Freshwater Binding Agent - Ammonia and Heavy Metals 4 L Grey 1276

  • BINDER: Seachem Zeolite is a naturally occurring, highly-porous mineral that binds ammonia and heavy metals through an ion exchange mechanism..
  • REMOVER: Seachem Zeolite works in marine and freshwater to remove harmful metal ions such as lead, copper, nickel, and zinc without depleting calcium....
  • DIRECTIONS: Use 250 mL (1 cup) of Seachem Zeolite for every 200 L (50 US gallons). For smaller aquariums, the equivalent dose is 5 mL (1 level....
  • FOR BEST RESULTS: Seachem Zeolite should be rinsed before use and placed so as to maximize the flow of water through it, but not so that it tumbles....
  • SAFETY: Be sure to wash thoroughly after handling Seachem Zeolite and store this product in its original container in a cool, dry area away from food....
Check Stock

Seachem Prime Water Conditioner, 2 Liter

  • The Kaytee Water Bottle Holder is the universal-fit bottle bracket that attaches to any type of cage. The Water Bottle Holder slides onto wire cages, hangs on any aquarium, or attaches to wooden walls with a screw..
  • It also detoxifies ammonia by converting ammonia into a safe, non-toxic form to be removed by the tank?s biofilter. It also detoxifies nitrite, nitrate and heavy metals found in tap water..
  • Use non-acidic Seachem Prime at start-up, tank cycling, or when adding or replacing water. Ingredients: Proprietary aqueous solution of complexed hydrosulfite salts..
  • May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal..
  • Prime your aquarium with Seachem Prime. This complete, highly concentrated conditioner for fresh and saltwater removes chlorine and chloramine..
Check Stock

Seachem Pristine Natural Waste Management - Organic Sludge and Detritus Eliminator 4L (28629)

  • WASTE MANAGEMENT: Seachem’s Pristine uses bioaugmentation, a non-chemical and natural method, to improve water quality. It provides bacteria that break down excess food, waste, and detritus in freshwater and marine systems..
  • HEALTHY ENVIRONMENT: Seachem Pristine works to reduce excess nutrients (e. g. ammonia, nitrates, and nitrites) that may fuel the growth of nuisance and disease-causing organisms, working to increase water clarity and promote overall better health for the aquatic environment..
  • GOOD BACTERIA: The bacteria species in Pristine thrive in fresh or saltwater and can utilize a wide range of organic compounds, including fats that cause unsightly films..
  • BLEND: This bacterial blend can adapt to harsh or low oxygen environments and continue to multiply and improve water conditions..
  • CARE: Shake Pristine well before use and be sure to turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons). Then use a maintenance dose of 1 capful (5 mL) per 80 L (20 US gallons) with additions of livestock or the disruption of the biofilter through cleaning or medications..
Check Stock

Seachem Stability - For Freshwater and Marine Aquariums 250ml

  • TANK STABILIZATION: Seachem Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome"..
  • TREATMENT: Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate..
  • BACTERIA GROWTH: The necessary conditions for the growth of Stability's bacterial strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the unknown death of an organism), Stability simply becomes more effective..
  • USE: Shake Seachem Stability well before use and turn off UV/ozone filter. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as the dosage is maintained for 7 days..
  • SAFE: The bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of overuse..
Check Stock

API Pond Master Test KIT Pond Water Test Kit 500-Test

  • Contains one (1) API POND MASTER TEST KIT Pond Water Test Kit 500-Test, including 6 bottles of testing solution, 3 color cards and 4 glass test tubes with cap.
  • Helps monitor water quality and prevent invisible water problems that can be harmful to fish.
  • Measures ornamental pond pH balance, Ammonia content, Nitrite levels and Phosphate content.
  • Contains six test bottles, instructions, glass test tubes and color charts for 500+ tests.
  • Use weekly for monitoring and when water or fish problems appear.
Check Stock

API POND MASTER TEST KIT Pond Water Test Kit 500-Test

  • Contains one (1) API POND MASTER TEST KIT Pond Water Test Kit 500-Test, including 6 bottles of testing solution, 3 color cards and 4 glass test tubes with cap.
  • Helps monitor water quality and prevent invisible water problems that can be harmful to fish.
  • Measures ornamental pond pH balance, Ammonia content, Nitrite levels and Phosphate content.
  • Contains six test bottles, instructions, glass test tubes and color charts for 500plus tests.
  • Use weekly for monitoring and when water or fish problems appear.
Check Stock

Seachem Stability Fish Tank Stabilizer - For Freshwater and Marine Aquariums, 16.9 Fl Oz (Pack of 1)

  • TANK STABILIZATION: Seachem Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome"..
  • TREATMENT: Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate..
  • BACTERIA GROWTH: The necessary conditions for the growth of Stability's bacteria strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the unknown death of an organism), Stability simply becomes more effective..
  • USE: Shake Seachem Stability well before use and turn off UV/ozone filter. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days..
  • SAFE: The bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of overuse..
Check Stock

AQUALUNA Aquarium Test Strips 6 in 1 for Freshwater and Saltwater- Fish Tank Test Kit Monitoring Level of pH, Nitrate, Nitrite, General Hardness, Free Chlorine and Carbonate-100 Counts

  • Marine care test kit includes all of the main kits you need to run a healthy marine aquarium.
  • Allowing you to easily monitor the nitrate, nitrite, ammonia, pH and alkalinity levels.
  • The easy-to-use tests come with simple instructions and color charts.
  • 100 Ammonia test with accuracy of 0. 02 ppm, 100 and 60 nitrate test with accuracy of 2 ppm and 0. 05 ppm.
  • 100 pH test with accuracy of 0. 2 ppm, 55 alkalinity test with accuracy of 1 dKH/0. 36 meq/L.
Check Stock