Categories

Best Seachem Tidal Filter

Seachem 437 Prime Fresh and Saltwater Conditioner - Chemical Remover and Detoxifier 1 L

  • POWERFUL TREATMENT: Seachem Prime is a complete and concentrated conditioner for both freshwater and saltwater fish tanks, working hard to remove chlorine and chloramine..
  • REMOVER: Seachem Prime immediately and permanently removes chlorine and chloramine, successfully allowing the bio filter to remove ammonia, nitrite, and nitrate while they are detoxified for 48 hours..
  • DETOXIFIER: Seachem Prime effectively detoxifies ammonia, nitrite, and heavy metals found in the tap water at typical concentration levels, providing a safe environment for your betta, tetra, or other fish..
  • USE: Use 1 capful (5 mL) of Seachem Prime for each 200 L (50 US gallons) of new or replacement water. For best results, add Seachem Prime to new water first. For exceptionally high chloramine concentrations, a double dose may be used safely. For smaller volumes, use 2 drops per gallon..
  • SAFETY: In case of an emergency, the 5x dose of Seachem Prime may be used for both ammonia and nitrite. Use a ½ dose if the water temperature is > 30°C (86°F) and chlorine or ammonia levels are low..
Check Stock

Fluval 406/407 Bio Foam Value Pack, Replacement Aquarium Filter Media

  • FLOW REGULATION: The fully adjustable flow regulation feature on the Tidal Power Filter adjusts performance to a specific aquarium volume, type, or provide an environment for fish that prefer more or less water movement or oxygenation. Adjust the dial from anywhere between 450 gallons per hour down to a gentle 90 gallons per hour..
  • SURFACE SKIMMER: The surface skimmer on the Tidal Power Filter will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank to remove floating debris..
  • ADJUSTABLE INTAKE FLOW: With Tidal’s dual intake, it pulls water in through the telescoping pipe below the surface and at the surface through the surface skimmer. Easily adjust how much flow comes from the underwater intake pipe versus the surface skimmer with the intake flow dial..
  • HEATER HOLDER: A heater can be attached to the side of the Tidal Power Filter with an optional heater clip, allowing for better dispersal of heated water throughout your tank or aquarium..
  • MAINTENANCE ALERT: When filtration media becomes clogged with detritus and affects the flow of water, the Tidal Power Filter redirects water around the filter and back into the aquarium through an outlet on the side. The redirected water then pu....
Check Stock

Seachem Flourite Black Clay Gravel - Stable Porous Natural Planted Aquarium Substrate 15.4 lbs

  • GRAVEL: Seachem Flourite Black is a specially fracted stable porous clay gravel for the natural planted aquarium. Its appearance is best suited to planted aquaria, but may be used in any freshwater aquarium environment..
  • AQUARIUM BED: Gravel modifiers such as laterite are not necessary when using Seachem Flourite Black as this product is most effective when used alone as an integral substrate bed, but it may be mixed with other gravels..
  • SET-UP: When adding water to the aquarium, fill slowly to avoid disturbing Flourite Black substrate bed. Place a bowl in the aquarium and add water directly to the bowl, allowing water to overflow softly on to the gravel bed. Initial cloudiness is normal, but to remove this simply use mechanical filtration.
  • COMPATIBLE: Flourite Black substrates will work fine with an under gravel filter and will not soften or decompose to an unsuitable state within your tank.Flourite substrates will work fine with an UGF.
  • SAFETY: Seachem Flourite Black is not chemically coated or treated, thus does not alter the pH of the water. Flourite Black is beneficial for the life of the aquarium and need not be replaced..
Check Stock

Seachem Stability Fish Tank Stabilizer - For Freshwater and Marine Aquariums 4L

  • TANK STABILIZATION: Seachem Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing....
  • TREATMENT: Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria....
  • BACTERIA GROWTH: The necessary conditions for the growth of Stability's bacterial strains encompass a very broad range. When other bacteria begin to....
  • USE: Shake Seachem Stability well before use and turn off UV/ozone filter. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a....
  • SAFE: The bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all....
Check Stock

Seachem The Bag Filter Media Bag 3 Pack

  • 3 Pack Of Seachem The Bag Filter Media Bag.
  • Welded filter bag ideal for all filtration..
  • Resistant to bleach, caustics, and acids..
Check Stock

Seachem Prime Fresh and Saltwater Conditioner - Chemical Remover and Detoxifier 16.9 fl. oz

  • POWERFUL TREATMENT: Seachem Prime is a complete and concentrated conditioner for both freshwater and saltwater fish tanks, working hard to remove chlorine and chloramine..
  • REMOVER: Seachem Prime immediately and permanently removes chlorine and chloramine, successfully allowing the biofilter to remove ammonia, nitrite, and nitrate while they are detoxified for 48 hours..
  • DETOXIFIER: Seachem Prime effectively detoxifies ammonia, nitrite, and heavy metals found in the tap water at typical concentration levels, providing a safe environment for your betta, tetra, or other fish..
  • USE: Use 1 capful (5 mL) of Seachem Prime for each 200 L (50 US gallons) of new or replacement water (each cap thread is approximately 1ml). For best results, add Seachem Prime to new water first. For exceptionally high chloramine concentrations, a double dose may be used safely. For smaller volumes, use 2 drops per gallon..
  • SAFETY: In case of an emergency, the 5x dose of Seachem Prime may be used for both ammonia and nitrite. Use a ½ dose if the water temperature is > 30°C (86°F) and chlorine or ammonia levels are low..
Check Stock

Seachem Zeolite Marine & Freshwater Binding Agent - Ammonia and Heavy Metals 500 mL

  • BINDER: Seachem Zeolite is a naturally occurring, highly-porous mineral that binds ammonia and heavy metals through an ion exchange mechanism..
  • REMOVER: Seachem Zeolite works in marine and freshwater to remove harmful metal ions such as lead, copper, nickel, and zinc without depleting calcium....
  • DIRECTIONS: Use 250 mL (1 cup) of Seachem Zeolite for every 200 L (50 US gallons). For smaller aquariums, the equivalent dose is 5 mL (1 level....
  • FOR BEST RESULTS: Seachem Zeolite should be rinsed before use and placed so as to maximize the flow of water through it, but not so that it tumbles....
  • SAFETY: Be sure to wash thoroughly after handling Seachem Zeolite and store this product in its original container in a cool, dry area away from food....
Check Stock

Matrix 2 L / 67.6 oz.

  • Filtration: Seachem Matrix Is High Porosity, Inorganic Solid Bio-Media That Provides Efficient Biofiltration For The Removal Of Nitrogenous Waste In....
  • Diameter: Measuring About 10Mm In Diameter, Each Liter Of Matrix Provides As Much Surface As 170 Liters Of Plastic Balls! Matrix Provides Both....
  • Macropores: These Matrix Macropores Are Ideally Sized For The Support Of Nitrifying And Denitrifying Bacteria, Allowing Matrix To Simultaneously....
  • Matrix May Be Placed In Any Kind Of Filter And Is Particularly Effective In A Canister Filter.
Check Stock

Seachem Zeolite Marine & Freshwater Binding Agent - Ammonia and Heavy Metals 4 L Grey 1276

  • BINDER: Seachem Zeolite is a naturally occurring, highly-porous mineral that binds ammonia and heavy metals through an ion exchange mechanism..
  • REMOVER: Seachem Zeolite works in marine and freshwater to remove harmful metal ions such as lead, copper, nickel, and zinc without depleting calcium....
  • DIRECTIONS: Use 250 mL (1 cup) of Seachem Zeolite for every 200 L (50 US gallons). For smaller aquariums, the equivalent dose is 5 mL (1 level....
  • FOR BEST RESULTS: Seachem Zeolite should be rinsed before use and placed so as to maximize the flow of water through it, but not so that it tumbles....
  • SAFETY: Be sure to wash thoroughly after handling Seachem Zeolite and store this product in its original container in a cool, dry area away from food....
Check Stock

Seachem Pond Prime Water Conditioner - Chemical Remover and Detoxifier 2 L

  • CONDITIONER: Seachem Pond Prime is a complete conditioner that works to provide essential ions and stimulates natural slime coat in any pond..
  • REMOVER: Use 1/8 cup (2 tablespoons) of Seachem Pond Prime for each 600-700 US gallons to successfully remove chlorine or chloramine from your fish’s environment..
  • DETOXIFIER: Seachem Pond Prime will detoxify any ammonia or nitrite produced by fish that live in your pond. To detoxify high concentrations of ammonia or nitrite, use 1/4 to 1/2 cup for each 600 gallons..
  • USE: If you are setting up a new pond, adding, or changing water, then Seachem Pond Prime should be the first choice conditioner to create and control a safe pond environment..
  • SAFETY: To detoxify nitrite in an emergency, up to 5 times the normal dose of Seachem Pond Prime may be used. If the water temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose..
Check Stock

Seachem Pond Prime Water Conditioner - Chemical Remover and Detoxifier 20 L

  • CONDITIONER: Seachem Pond Prime is a complete conditioner that works to provide essential ions and stimulates natural slime coat in any pond..
  • REMOVER: Use 1/8 cup (2 tablespoons) of Seachem Pond Prime for each 600-700 US gallons to successfully remove chlorine or chloramine from your fish’s environment..
  • DETOXIFIER: Seachem Pond Prime will detoxify any ammonia or nitrite that live in your pond without causing a pH drop. To detoxify high concentrations of ammonia or nitrite, use 1/4 to 1/2 cup for every 600 gallons..
  • USE: If you are setting up a new pond, adding, or changing water, then Seachem Pond Prime should be the first choice conditioner to create and control a safe pond environment..
  • SAFETY: To detoxify nitrite in an emergency, up to 5 times the normal dose of Seachem Pond Prime may be used. If the water temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose..
Check Stock

Seachem Purigen 4 Liters Model 169

  • FILTRATION: Purigen ranges in color from almost white (cream) to light yellow. Seachem Purigen is not a mixture of ion exchangers or adsorbents, but a....
  • SELECTIVITY: Seachem Purigen is an organic filtration resin that works hard to remove nitrogenous compounds and waste produced by fish, corals, and....
  • CAPACITY: Being both spherical and macroreticular, Seachem Purigen has microscopic pores that increase its usable surface area to many times that of a....
  • REGENERATION: Once Seachem’s Purigen is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn....
  • SAFETY: Some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of bleach/chlorine is....
Check Stock

Seachem Purigen 2 Liters Model 168

  • FILTRATION: Purigen ranges in color from almost white (cream) to light yellow. Seachem Purigen is not a mixture of ion exchangers or adsorbents, but a....
  • SELECTIVITY: Seachem Purigen is an organic filtration resin that works hard to remove nitrogenous compounds and waste produced by fish, corals, and....
  • CAPACITY: Being both spherical and macroreticular, Seachem Purigen has microscopic pores that increase its usable surface area to many times that of a....
  • REGENERATION: Once Seachem’s Purigen is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn....
  • SAFETY: Some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of bleach/chlorine is....
Check Stock