2 Sets of Thermos Stainless King (TM) -Compatible 16 Ounce Travel Tumbler / Mug Gaskets / Seals by Impresa Products - BPA-/Phthalate-/Latex-Free - 2 Full Replacements Per Kit
- Please Note: This gasket / o-ring / seal set fits only travel tumblers / mugs with the Wide Body and Narrow Top model (Stainless King (TM) and comparable mugs). Will Not Fit the narrow body and wide top model (Sipp (TM) models). Please view all pictures prior to purchasing.
- Ideal Replacements: Replacement gaskets / o-rings / seals for 16 ounce / oz Stainless King (TM) (and comparable model) vacuum insulated stainless steel travel tumblers and travel mugs. These do not fit any other sizes or models.
- Replace Your Lost Or Loose Gasket: Gaskets get lost periodically and get warped/worn out over time. A damaged gasket (or no gasket, at all) means a poor seal, leading to a leaky bottle. Always have a spare on hand!.
- Save Money, Easy To Install: Replacement gaskets for these lids are often hard or expensive to find - don't buy a new lid, just get a new set of gaskets. Easy-to-install - directions below. 6 gaskets per pack for 2 full replacements (3 gaskets needed per replacement).
- Made From High-Quality, Food-Safe Silicone: Our gaskets are made from high-quality, durable, food-safe silicone and are BPA-free, phthalate-free and latex-free. Please note: This is an Impresa Products (TM) aftermarket replacement product meeting or exceeding the quality of OEM g....
Check Stock
Sterling Seal 90003304GR600x24 304 Stainless Steel spiral Wound Gasket with Flexible Graphite Filler, for 3\ Pipe, Pressure Class 600#, Yellow With Grey Stripe (Pack of 24)
- Sterling Seal Style 9000 stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
- Sterling Seal Style 9000 gaskets are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
- Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
- Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
- Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock
Sterling Seal 90005304GR150X6 304 Stainless Steel Spiral Wound Gasket with Flexible Graphite Filler for 5\ Pipe, Pressure Class 150#, Yellow with Grey Stripe (Pack of 6)
- Sterling Seal Style 9000 stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
- Sterling Seal Style 9000 gaskets are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
- Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
- Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
- Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock
Sterling Seal 90005304GR300X6 304 Stainless Steel Spiral Wound Gasket with Flexible Graphite Filler for 5\ Pipe, Pressure Class 300#, Yellow with Grey Stripe (Pack of 6)
- Sterling Seal Style 9000 stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
- Sterling Seal Style 9000 gaskets are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
- Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
- Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
- Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check StockGatorade Gx Hydration System, Non-Slip Gx Squeeze Bottles & Gx Sports Drink Concentrate Pods
- 【Excellent Compatibility】 Rubber seal provides sufficient quantity and size for perfect compatibility with Gatorade Gx squeeze bottles and 30oz Gatorade Gx refillable squeeze bottles.(If you want to use rubber seal on other models of cups, please check carefully first!).
- 【Keeps it clean】Pack of up to 7 lid seals replacement gaskets for Gatorade waterbottles! Regular replacements will keep your cups looking as clean as new!.
- 【Material Safety】Each replacement seal for 30oz Gatorade Gx is made of the food-grade plastic, BPA-free, odorless, reusable, and durable..
- 【Perfect Seal】Durable and flexible gaskets provide a good seal and long service life. Easy to install and clean, perfect fit..
- 【More Trusty】If you have any questions about our replacement seal, feel freeto contact us, we'll have professional teams to solve your confuse..
Check StockAthena P400510850260 Complete Engine Gasket Kit
- Fits: Suzuki LT 250 R QuadRacer 1985-1986.
- Athena complete gasket kits feature superior quality gaskets, containing the top and bottom end gaskets needed to rebuild your motorcycle or ATV engine.
- Athena ensures they are only using the highest quality gaskets to provide a great seal every time.
- Manufactured in state-of-the-art computer controlled facilities, Athena gaskets are designed and built to meet or exceed OEM specifications.
- Athena is the OEM supplier to 60 percent of European manufacturers.
Check Stock
Sterling Seal SSI90002304GR150x12 Spiral Wound Gasket with Flexible Graphite Filler for 2\ Pipe, Pressure Class 150#, 2.75\ ID, 304 SS Windings/Graphite/Carbon Steel Outer Ring (Pack of 12)
- Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
- Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
- Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
- Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance.
- Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed.
Check StockSterling Seal SSI90002304GR600x12 Spiral Wound Gasket with Flexible Graphite Filler for 2\ Pipe, Pressure Class 600#, 2.75\ ID, 304 SS Windings/Graphite/Carbon Steel Outer Ring (Pack of 12)
- Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
- Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
- Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
- Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance.
- Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed.
Check StockSterling Seal SSI90001500304GR1500x24 Spiral Wound Gasket with Flexible Filler for 1-1/2\ Pipe, Pressure Class 1500#, 1.875\ ID, 304 SS Windings/Graphite/Carbon Steel Outer Ring (Pack of 24)
- Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
- Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
- Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
- Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance.
- Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed.
Check StockAthena (P400250850009) Complete Engine Gasket Kit
- Athena complete gasket kits feature superior quality gaskets, containing the top and bottom end gaskets needed to rebuild your motorcycle or ATV engine.
- Athena ensures they are only using the highest quality gaskets to provide a great seal every time.
- Manufactured in state-of-the-art computer controlled facilities, Athena gaskets are designed and built to meet or exceed OEM specifications.
- Maximizes power and service life in Kawasaki Dirt Bikes and offroad vehicles.
- Fits the following rides Fits: Kawasaki KX 250 1993-2000.
Check Stock12 Pack M16 Engine Oil Drain Plug Sealing Washers/Crush Gaskets 803916010 Fit Replacement for Subaru Outback Crosstrek Forester WRX BRZ Impreza Engine Oil Seals Rings Silver
- Made to specific sizes and standards to ensure a proper fit/Designed and constructed to strict engineering quality standards.
- Direct replacement gaskets and some universal gaskets available. Proper fit with the drain plug ensures a tight seal.
- Easy to install, save your money. Leak free, great value for 12 pack. Spec: ID 16mm/ OD 21mm/ Thickness 2.5 mm.
- This 16 mm / 0.63 inch oil drain plug gaskets crush washers is needed for every oil change, it helps to seal the drain plug and oil pan surfaces.
- This oil drain plug gaskets crush washers is for Subaru Outback Legacy Impreza Forester BRZ XV Crosstrek, see more vehicle details in the description part.
Check StockNRS Stampede Semi-Dry Top-Fjord-M
- 4-layer Eclipse fabric, with its proprietary waterproof-breathable barrier.
- Nanosphere DWR finish lock water out while letting moisture escape.
- The supple polyester microfiber shell allows frictionless paddling with superior resistance.
- An alternative to more constricting latex gaskets, the punch-through neoprene GlideSkin neck seal.
- Tough latex wrist gaskets seal out water, protected by self-draining volcano-style neoprene covers.
Check StockSterling Seal SSI90004304GR150x12 Spiral Wound Gasket with Flexible Filler for 4\ Pipe, Pressure Class 150#, 5\ ID, 6.875\ OD, 304 SS Windings/Graphite/Carbon Steel Outer Ring (Pack of 12)
- Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints..
- Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
- Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow..
- Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance..
- Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed..
Check Stock
