Categories

Best Seal silicon Carbide

Various Models I.D 18/20/25/28/30mmViton Seal 250 Celsius/Corrosion Resist Mechanical Seal Shaft Seal Water Pump Centrifugal Pump Water Proof (Thread Specification : 18mm)

Check Stock

Red Lion 6RLAG-3LTT LCT Gas Engine Driven Trash Pump 3-inch NPT, Black, 617038

  • GAS ENGINE DRIVEN TRASH PUMP: can handle liquid slurries containing sand, small rocks, and other debris up to 1-1/4-inches in diameter.
  • silicon carbide seal for abrasion resistance and trash applications.
  • APPLICATION: ideal for high volume water transfer dewatering applications such as emptying ditches, reservoirs, ponds, etc.
  • EASY MAINTENANCE: removable aluminum outer casing allows access to impeller for cleaning.
  • PUMP SPECIFICATIONS: 3-inch MNPT intake and discharge.
  • delivers up to 285 GPM, 75-ft. maximum head, 25-ft. suction lift, silicon carbid seal, heavy-duty roll frame.
  • ENGINE SPECIFICATIONS: 208cc, air colled 4-stroke OHV type LCT engine.
Check Stock

Pump, Grinder, 2 HP, 15a

  • Price For: Each Pump Body Material: Cast Iron Cord Length: 25 ft. Off Point: 8 GPM of Water @ 100 Ft. of Head: 9 Shaft Seal: Silicon Carbide/Double Viton Lip Motor RPM: 3450 Max Head – Pumps: 108 ft. Manufacturers Warranty Length: 3 Yr. GPM of Water @ 60 Ft. of Head: 42 HP: 2 GPM of Water @ 5 Ft. of Head: 50 Hz: 60 Input Phase AC: 1.
  • GPM of Water @ 15 Ft. of Head: 50 Max. Liquid Temp.: 140 Degrees F Max. Head: 108.0 ft. Voltage: 208/230 Amps: 15 GPM of Water @ 10 Ft. of Head: 50 Item – Grinder Pumps: Grinder Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
  • GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
  • Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM....
Check Stock

Red Lion 2In 208Cc Semi Trash Pump

Check Stock

The Roman Spring of Mrs. Stone

  • Made of green silicon carbide in a vitrified bond.
  • Long service life because of hard silicon carbide.
  • HIGH PERFORMANCE: PFERD Bench grinding wheels offer a high dimensional stability and abrasive performance for working with a large variety of materials and for many different applications.
  • COMPATIBILITY: PFERD high-quality bench grinding wheels have been adapted to the standard bench grinders on market. Telescopic bushings for mounting on almost any bench grinder spindle are integrated.
  • CARBIDE TYPE: CARBIDE type bench grinding wheels are used on hard materials, such as for sharpening tungsten carbide tools. Materials that can be worked are also glass or hardened, heat treated steels.
  • LONG SERVICE LIFE: Dressing the disc on a regular basis exposes sharp grain and maintains an even grinding area. Constantly adjust the workpiece support to the wheel diameter, gap width max. 1/8''.
  • DELIVERY KIT: 1 x PFERD Bench grinding wheel | Vitrified bond | CARBIDE type | 6'' dia. | 3/4" thickness | 1'' bore | Flat (type 1) | Green silicon carbide | 120 Grit | Max. RPM: 4,140 | EDP 61787.
Check Stock

Dremel 729-01 Carving & Engraving Rotary Tool Accessories Kit, 11-Piece Assorted Set - Perfect for Use On Wood, Metal, and Glass

  • Turn your Dremel rotary tool into a versatile carving machine with the 11-piece carving & engraving micro accessory kit..
  • Kit includes a reusable storage case and a variety of accessories to allow you to carve, etch and engrave in a variety of materials including steel, wood, plastic, glass, stone, ceramic, and more..
  • Carving/Engraving Accessories: 105 1/32" Engraving Bit (x1), 106 1/16" Engraving Bit (x1), 107 3/32" Engraving Bit (x1), 108 - 1/32" Engraving Bit (x1), 7103 5/64" Diamond Wheel Point (x1), 7134 5/64" Diamond Wheel Point (x1).
  • Sharpening/Grinding Accessories: 83142 9/32" Silicon Carbide Grinding Stone (x1), 83322 - 1/8" Silicon Carbide Grinding Stone (x1), 83702 1/8" Silicon Carbide Grinding Stone (x1), 84922 3/16" Silicon Carbide Grinding Stone (x1), 85602 13/32" Silicon Carbide Grinding Stone (x1).
  • USA-BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

MJR Tumblers Refill Grit Kit for 30 LB Rock Tumblers Silicon Carbide Aluminum Oxide Media Polish

  • 30 ounces of 60/90 Graded Silicon Carbide Grit (Step 1).
  • 30 ounces of 120/220 Graded Silicon Carbide Grit (Step 2).
  • 15 ounces of 500/600 Graded Silicon Carbide Grit (Step 3).
  • 15 ounces of 1200 Aluminum Oxide Polish (Step 4).
Check Stock

MJR Tumblers Refill Grit Kit for 25 LB Rock Tumblers Silicon Carbide Aluminum Oxide Media Polish

  • 26 ounces of 60/90 Graded Silicon Carbide Grit (Step 1).
  • 26 ounces of 120/220 Graded Silicon Carbide Grit (Step 2).
  • 13 ounces of 500/600 Graded Silicon Carbide Grit (Step 3).
  • 13 ounces of 1200 Aluminum Oxide Polish (Step 4).
Check Stock

MJR Tumblers Refill Grit Kit for 40 LB Rock Tumblers Silicon Carbide Aluminum Oxide Media Polish

  • 40 ounces of 60/90 Graded Silicon Carbide Grit (Step 1).
  • 40 ounces of 120/220 Graded Silicon Carbide Grit (Step 2).
  • 20 ounces of 500/600 Graded Silicon Carbide Grit (Step 3).
  • 20 ounces of 1200 Aluminum Oxide Polish (Step 4).
Check Stock

MJR Tumblers Refill Grit Kit for 12 LB Rock Tumblers Silicon Carbide Aluminum Oxide Media Polish

  • 12 ounces of 60/90 Graded Silicon Carbide Grit (Step 1).
  • 12 ounces of 120/220 Graded Silicon Carbide Grit (Step 2).
  • 6 ounces of 500/600 Graded Silicon Carbide Grit (Step 3).
  • 6 ounces of 1200 Aluminum Oxide Polish (Step 4).
Check Stock

MJR Tumblers Refill Grit Kit for 50 LB Rock Tumblers Silicon Carbide Aluminum Oxide Media Polish

  • 50 ounces of 60/90 Graded Silicon Carbide Grit (Step 1).
  • 50 ounces of 120/220 Graded Silicon Carbide Grit (Step 2).
  • 25 ounces of 500/600 Graded Silicon Carbide Grit (Step 3).
  • 25 ounces of 1200 Aluminum Oxide Polish (Step 4).
Check Stock

MJR Tumblers Refill Grit Kit for 18 LB Rock Tumblers Silicon Carbide Aluminum Oxide Media Polish

  • 18 ounces of 60/90 Graded Silicon Carbide Grit (Step 1).
  • 18 ounces of 120/220 Graded Silicon Carbide Grit (Step 2).
  • 9 ounces of 500/600 Graded Silicon Carbide Grit (Step 3).
  • 9 ounces of 1200 Aluminum Oxide Polish (Step 4).
Check Stock

MJR Tumblers Refill Grit Kit for 10 LB Rock Tumblers Silicon Carbide Aluminum Oxide Media Polish

  • 10 ounces of 60/90 Graded Silicon Carbide Grit (Step 1).
  • 10 ounces of 120/220 Graded Silicon Carbide Grit (Step 2).
  • 5 ounces of 500/600 Graded Silicon Carbide Grit (Step 3).
  • 5 ounces of 1200 Aluminum Oxide Polish (Step 4).
Check Stock