Categories

Best Sealing Locknut

Snowpiercer: The Complete First Season S1 (DVD)

  • 【PREMIUM CONDUIT FITTINGS】- Quantity: 5PACK，Size：3/4inch， The Flexible Conduit Connector is Constructed with Resists corrosion PVC to ensure quality and service life..
  • 【COMPLETE ACCESSORIES】-3/4-Inch 5PACK Electrical Conduit Connector,Each connector comes with a sealing washer and locknut.
  • 【SAFETY AND STURDINESS】-Resists Corrosion, Abrasion, oil, Water, Acid, Metal Shavings, and Rough Environments.
  • Outdoor, Sunlight Resistant, Direct Burial,50% Lighter Than Metallic Conduits.
  • 【EFFORTLESS LNSTALLATION】-The Liquid-Tight Conduit Connector Fits is fast,NO disassembly is required and only one person can complete you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • 【WIDE APPLICATION】-O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable,HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Check Stock

Mueller Industries 109-814 Float Valves, 0.75 Inch

  • Dual inlet thread for connecting pipe and locknut.
  • Machined flange for support against tank wall.
  • Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves.
Check Stock

1 Inch 90 Degree Nonmetallic Liquid Tight Electrical Conduit Conector Fitting, 4 Pack, UL Listed

  • Material: Nylon material, resist sea water, gasoline, alcohol ,grease and so on..
  • Performance: Flammability classification 94V-2.
  • Installation: Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • Application: Suitable for indoor/outdoor usage.
Check Stock

1 PC Tilt Cap/Gland with Seals Fit for Yamaha 200-225-250-300 HP V6 3.3L End Cap Tilt Cylinder 61A-43811-00-00

  • Sealing ring: neoprene 50. Working Temperature: -20 C to 90 C..
  • Easily installed using M25 Threads or to a mounting hole using the locknut..
Check Stock

Goulds SJ20 Vertical Deep Water Well Jet Pump, 2 HP, Single Phase, 230 V.

  • Cast iron, semi-open, non clog impeller is dynamically balanced with pump out vanes for mechanical seal protection.
  • Cast iron volute type for maximum efficiency.
  • Designed for easy installation on A10-20 guide rail or base elbow rail systems.
  • Mechanical seal with SILICON CARBIDE VS. SILICON CARBIDE sealing faces for superior abrasive resistance, stainless steel metal parts, BUNA-N elastomers.
  • Corrosion-resistant stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation.
Check Stock

FirmiBang Liquid Tight Connector 3/4 in - Non-Metallic Electrical Conduit Fittings, UL Listed PVC Conduit Fitting (Straight, 5 Pack)

  • ▲PREMIUM QUALITY - Liquid tight connectors are made of high-impact PVC, Flammability rating 94V-2, Temperature index 125 ° C. Rust and corrosion resistant..
  • ▲Easy to install - FirmiBang flexible conduit connector is safe to use and does not require any tools. you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule..
  • ▲Wide Application Range - Electrical conduit connector is suitable for indoor or outdoor use. Connects type B non-metallic liquid-tight conduits to weatherproof outlet boxes, pool and spa equipment motors, central air-conditioning units and various other electrical enclosures and hubs..
  • ▲PACKAGE - Each connector comes with a sealing washer and locknut. We have different models of liquid-tight connectors to meet your different needs..
  • ▲After-sales guarantee - If you have any question with our liquid tight connectors , Feel free to contact us. We will answer you as soon as possible..
Check Stock

OTC 1909 3-1/4" 8-Point Octagon Locknut Wrench

  • 3-1/4 inch 8-point octagon locknut wrench.
  • High strength steel resists rounding out.
  • For use with 3/4 inch square-drive manual tools only.
  • Measure from flat to flat to determine size of locknut.
Check Stock

KiWAV Tappet Valve Adjustment Wrench Tool Set Timing Chrome Vanadium Steel

  • The hand tool allows micro adjustment without disturbing the locknut which can be tightened when the correct clearance is achieved..
  • Use a 12mm wrench to hold the locknut socket while using square type driver to loosen or tighten the valve adjustment screw..
  • 8, 9mm locknut sockets and 3mm square type driver included..
  • Fits most motorcycles and ATVs with screw-type tappet adjustments..
Check Stock

NOVINO 14-1/2Dia X 19Pitch Boat Outboard Propeller for Mercruiser Alpha One Prop/Mercury Engine 135 150 175 200 220 225 250 300HP,3-Blade Aluminum 14.5dia x 19 Pitch Propeller,Replace OEM#48-832830A45

  • ... pitch Mercury/Mercruiser propeller,lower fuel consumption and great speed acceleration or rmps,,reduce the wear and tear on engine.
  • Easy Install: The propeller with hub kit Includes Flo-Torque hub kit (hub, splined hub, thrust washer, prop nut and keeper),Just remove prop locknut&locknut retainer& forward thrust washer.Then Install forward thrust washer---Insert drive sleeve into prop---Slide prop on prop shaft---Insert drive sleeve adapter--Slide locknut retainer---Install prop locknut---Insert sth to prevent spinning--Tighten prop locknut.
  • Fitment:perfect propeller replacement for 14.5x19pitch Mercury Engines 135 150 175 200 220 225 250 300HP&Mercruiser Alpha One Bravo One,detail information pls see below.
Check Stock

ISPINNER 4pcs NPT 1/2\ Nonmetallic Liquid Tight Electrical Conduit Connector Fittings, UL Listed, 94V-1, Pack of 4

  • HIGH QUALITY - These liquid tight conduit connector fittings are made of high quality nylon, resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Flammability rating 94V-1, temperature index 125℃..
  • SIZE & QUANTITY - 4 Pack of NPT 1/2 Inch.
  • EASY TO USE - Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • PACKAGE - Each connector comes standard with a O-ring and locknut..
  • WIDELY APPLICATION - It can be used for machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting and so on..
Check Stock

Hahiyo PG7 PG9 PG11 PG13.5 PG16 PG19 Nylon Cord Grip Cable Glands with Gasket Nut Securely Seal Threads Quick Install Wire Joint Connectors Black 28 PCS for Water Tight Electrical Circuits Boxes

  • Sealing ring: neoprene 50. Working Temperature: -20 C to 90 C..
  • Easily installed using M25 Threads or to a mounting hole using the locknut..
Check Stock

FIT Nylon Air Brake Nut, OD (1/4\ 10pcs 3/8\ 10pcs 1/2\ 10pcs) Brass Compression Tube Fitting, Nut (4G-FA-614 10pcs/4G-FA-616 10pcs/4G-FA-618 10pcs)

  • Heyco Liquid Tight Cordgrip Straight-Thru, NPT Hubs for Flexible Cords..
  • .170" Minimum Cable Diameter, .450" Maximum Cable Diameter, .875" Clearance Hole.
  • 1.72" Maximum O.A. Length, .62" Thread Length, .20" Wrenching Nut Thickness, .95" Wrenching Flat.
  • All nylon construction with TPE Sealing Gland resists salt water, weak acids and common solvents.
  • No Nut Included. Use Locknut 8461 (purchased separately).
Check Stock

Sigma Electric ProConnex C-560 Snap Lock AC/MC Connector 3/8-Inch, 25-Pack

  • Terminates AC or MC to a 1/2" knockout without a locknut.
  • For aluminum or steel 14/2 - 10/3 AC or MC.
  • No locknut assembly for faster installation.
Check Stock