Categories

Best Sealing Locknuts

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,，UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

Glvaner (10 Sets) M10-1.5 x 25mm Thread Length Flat Round Head Socket Head Cap Screws with Hex Locknuts 304 Stainless Steel Furniture Screws Projects

  • Package Includes: 10 Pcs M10 Screws and 10 Pcs M10 Hex Locknuts.
  • Material: 304 stainless steel (A2) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
  • Included 10 pcs free same size M10 Hex Locknuts to help save your time and money to find nuts.The locknuts are also made of 304 stainless steel and could be found seperately in our shop for your needs..
Check Stock

Performance Tool W89314 1/2-Inch Drive Wheel Bearing Lock Nut Socket Set 7-Piece

  • Hex Locknuts Sizes Contains One Each: 2-3/8", 2-1/2" and 55mm.
  • Rounded Locknuts Contains One Each: 2-1/2", 2-3/4", 2-9/16" and 2-3/8".
Check Stock

EZ-FLO 40079 Touch Flush Valve for Eljer Toilets White

  • WRENCH WIDTH: about 8cm 3.15 inch. Lever length: about 21 cm 8.3inch This Modern metal lever wrench will help your toiletcan add a new stylish touch....
  • DURABLE MATERIAL: Metal Plating Wrench + Copper Lever This is highly durable handle arm construction. It features a copper finish handle with Metal....
  • EASY INSTALLATION: Side Mount Toilet Lever Handle, suitable for TOTO Kohler Toilet Tankhe sturdy handle is durable construction and easy to install.....
  • FUNCTIONAL HARDWARE: This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread,....
  • FUNCTIONAL FOR HOMEUSE: This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread,....
Check Stock

Canopy Kit for Chandelier, 5 1/8 Ceiling Lighting Modern Steel Canopy Kit Light Fixture Cover Plate, Hook & Cord Holder for Pendant Lighting Fixtures (Brushed Nickel )

  • Canopy size 5-1/8"x 1" includes wire clasp and hook.
  • two pendants use options, you can choose to use rope, or chain are designed in 25 lbs..
  • 5-1/8"Canopy kit can be used in DIY pendant lights, chandeliers, ceiling lighting and Wall Lights replacements or updates to canopies..
  • Design: 5-1/8"Canopy can cover most Ceiling Outlets.
  • Metal Cord Holder, the current popular cord light standard.
  • Hook can directly hang chain light or other..
  • Get a new replacement with any quality problem, 24 hours online service..
Check Stock

Chain Link Fence Gate Wheel for Metal Tube Swing Gate - 6' Hot Galvanized Heavy Duty Gate Wheels for Cattle Fence Gate, Tooltriz

  • 【High support weight】An actual high-strength fence gate wheel with the capacity of 550 pounds. The wheel's width and curved rim make it adaptable to all kinds of roads, gravel road, dirt road, and cement road..
  • 【Good structure】The tire is real solid rubber with good elasticity and quiet function. Bearings are standard ball bearings, bearing capacity and service life are much higher than other bearings..
  • 【Hot-dip galvanized thick frame】The wheel frame adopts new technology, high strength, and hot-dip galvanized.
  • longer rust prevention time. In addition, the steel plate is more thikcer than ordinary products..
  • 【Standardized chain link fence parts】After a few years, it is easy to buy and find accessories if the bearing or wheel is damaged, save you money..
  • 【Stainless steel bolts with locknuts】This gate wheel adopts Stainless steel bolts and stainless steel locknuts. Therefore, there will not happen the gate wheel can't disassemble because of rust..
Check Stock

Canomo Silver Finish Make-A-Lamp Kit 3-Way with 8 Inch Harp, 2 Pieces 12" Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair…

  • Include a 3-Way turn knob socket, 8 inch silver detachable harp, 8 foot UL listed clear cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
  • Silver finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY projects and for repair and replacement of broken, tarnished or silver lamp parts..
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
Check Stock

Canomo Antique Brass Finish Make-A-Lamp Kit 3-Way with 8 Inch Lamp Harp, 2 Pieces 12" Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair

  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY projects and for repair and replacement of broken, tarnished or lamp parts..
  • Antique brass finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Include a 3-Way turn knob socket, 8 inch antique brass detachable harp, 8 foot UL listed clear cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
Check Stock

Canomo 2 Sets Lamp Making Kit Lamp Wiring Kit with 8 Inch Harp, 2 Pieces 12\ Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair, Black

  • Package Include 2 Packs: 3-Way turn knob socket, 8 inch black detachable harp, 8 foot UL listed blak cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
  • Three-Way Socket Lamp Making/Repair Kit is made of high-quality metal which ensures premium quality and a classic look. The Lamp Kit is UL and CUL safety rated for Indoor location use.
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Contains two each: 1/8-IP x 12" threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY your own lamp and for repair and replacement of broken, tarnished or lamp parts..
Check Stock

Canomo Black Finish Make Lamp Kit Lamp Lighting kit 3-Way with 8 Inch Harp, 2 Pieces 12\ Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair

  • Package Include a 3-Way turn knob socket, 8 inch black detachable harp, 8 foot UL listed black cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
  • Three-Way Socket Lamp Making/Repair Kit is made of high-quality metal which ensures premium quality and a classic look. The Lamp Kit is UL and CUL safety rated for Indoor location use.
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Contains two each: 1/8-IP x 12" threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY your own lamp and for repair and replacement of broken, tarnished or lamp parts..
Check Stock

Jmkcoz Angle Fitting Side Mount Toilet Flush Lever Handle for TOTO Kohler Toilet Tank Universal Fit for Most Toilet, Toilet Repair Handle with Nut, Copper Lever

  • ...e for TOTO Kohler Toilet Tankhe sturdy handle is durable construction and easy to install. Please note that there is no install instruction, please make sure you can install it before order for a smooth flush..
  • FUNCTIONAL HARDWARE: This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread, which can help prevent loosening over time and provides a quick installation on the front, side or at an angle on the tank, arm can be bent or cut as needed..
  • FUNCTIONAL FOR HOMEUSE: This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread, which can help prevent loosening over time and provides a quick installation on the front, side or at an angle on the tank, arm can be bent or cut as needed..
Check Stock

Superior Tool 6012 Soft Jaw Plumbing Pliers, One Size, Red

  • Soft jaws will not mar or scratch polished or plated surfaces.
  • For plastic and metal basin and sink locknuts, trap nuts and toilet spuds.
Check Stock

Shimano bike tools lock ring-tool / free hub puller

  • Tool for removing and tightening lock rings.
  • Fits Centre-Lock Disc rotors and HG cassettes.
  • Large internal diameter will fit over all axle locknuts.
  • Can be used with 3/4 inch drive torque wrench or ratchet driver.
Check Stock