Categories

Best Seamless Line Steel Pipe

IEason,Men Stainless Steel Watch Analog Quartz Movement Wrist Watches Silver B

  • Insulated copper coil line set is made in USA..
  • The 16 Ft. line set is insulated high quality copper tubing. Seamless pure copper pipe shows no leaks, which is divided into 1/4" low and 1/2" high....
  • With embossed polyethyene film, climate resistant foam, and 3/8 inch thickened insulated cotton, this three-layer insulated mini split copper line set....
  • The insulated copper twin line set has been successfully tested by Method ASTM G154. No cracking at low temperature of -40 ° F, no deformation at....
  • Package Include: insulated line set*1, wall sleeve cylinder*1, decorative wall cap*1, wall filler putty*1, non-adhesive decorative wrapping tape*1,....
Check Stock

Rodeel 24 PCS Fishing Leaders Wire with 49 Strands Tooth Proof Stainless Steel with swivels

  • Package Content:24pcs fishing wire leaders rigs.
  • Length: 25cm/0.82inch,Line Diameter: 1mm/0.04inch,Steel wire Pulling Force:40KG/88.18LB.
  • Material:High-strength stainless steel wire +hot air pipe.
  • Design - 8-ring interface ring solves the winding problem, and use hot air pipe to wrap the snap and swivel, remain stable underwater, fish loading rate is higher.
  • Lamination fishing line- 304 stainless steel 49 stranded wire，very soft and strong. The 49 strand design makes it very durable, and the 304 lamination stainless steel wire used will not rust..
Check Stock

Mofun 12" Rise Ape Hangers 1.5" Fat Bars 1" Clamp Handlebars Fits for Harley Softail Dyna Sportster XL 883 1200 1998-2013 Road Glide 1994-2023 Road King Gloss Black

  • 【Fitments】:Fit most Harley Dyna Softail Sportster XL 883 1200 & 1994-up Road King Model & 1998-2013 Road Glide.**Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide** **Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers**Can not fit model with 1.25 Handlebar Clamp below.You can ask customer service for more detail information of motorcycle model..
  • 【Specifications】:Bar Diameter: 1.5 inch Fat Bar.Center Width: 11.75 inch, Clamp Area Width: 5.4 inch & Diameter: 1 inch.Grip Area Bar Diameter: 1 inch.End Rise: 12 inch.Overall Width: 35 inch.Pullback/Sweep: 8 inch..
  • 【High Quality】:Material: Seamless steel line pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market)Finish: Powder Coated Black(Copper+Nickle+Black),High Standard Rust-Proof Plating which can be tested by salt spray 48 hours neutral..
Check Stock

SHURFLO 255-325 1/2\ Barb Swivel Nut Strainer

  • Mini "T" line strainer pipe fitting for adding filtration to a pipe line.
  • Glass reinforced polypropylene for resistance to most chemicals and dimensional stability, and stainless steel 304 screen for resistance to corrosion and extreme temperatures.
  • 1/2" female NPT threaded connection on both ends.
  • EPDM gaskets standard. FKM (viton type) available.
Check Stock

Fuel Line Plier Petrol Clip Pipe Plier Hose Pipe Disconnect Release Removal Pliers Clamps Tool

  • 【Size】：The total length approx:9”/220mm, handle length approx:4”/100mm, Maximum opening approx:2.4”/60mm. Heavy duty design, 8mm....
  • 【High quality material】：This fuel pipe plier is made of high-quality steel material, which is durable and sturdy. It is not easily damaged, has....
  • 【Useing】：Suitable for installation of automotive water pipes and removal of spring bundle. Like fuel line, gasoline pipe, urea pipe, oil pipe..
  • 【Scope of application】：The fuel hose plier has high practicality, which is a practical tool for disassembling and replacing the connections on....
  • 【Design features】：The fuel line clip release plier designed according to ergonomics principle, which is labor saving and comfortable to use.Use....
Check Stock

Hilitchi Fuel Line Petrol Clip Pipe Pliers 9 Inch Fuel Filter Calipers Fuel Line Pliers and 80 Degree Disconnect Pliers Push Pin Pliers Set (Pack of 3)

  • ✅[QUALITY MATERIAL] Our fuel line pliers are made of quality carbon steel, high strength and with PVC handle, it makes you feel more comfortable and no hand fatigue during operation. Maximum opening approx 85mm/3.35inches. Suitable for installation of automotive water pipes and removal of spring bundle. Like fuel line, gasoline pipe, urea pipe, oil pipe..
  • ✅[QUICK DISCONNECT PLIERS] Featuring with black oxidation treatment, this disconnect pliers is made of high strength carbon steel and with durable spring, it surely will ensure a smooth operation experience for you. Low-profile design with 80 degree bend allows the tool to fit between the top of the fuel tank and vehicle..
  • ✅[9” PLIERS] Fuel filter caliper also made of carbon steel, featuring with a flexible spring, you could make it to the appropriate opening you want. Maximum opening approx: 32mm/1.26in. Also, they universally fit for all automobiles, suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters.
  • ✅[NICELY-PACKED PACKAGE] This fuel line pliers kit includes a hose pipe clamp, 80 degree disconnect pliers and 9 inch fuel filter calipers. Nice and neatly packed. All of the pliers are packed in a quality leather zipper bag. Elastic straps sewn ....
Check Stock

Excalibur 9-Tray Food Dehydrator and 4 ParaFlexx Dehydrator Sheets

  • Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
  • Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
  • Meets FCC Class B and EN 55022 Class B requirements.
  • Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground pipe and line detection.
  • Constructed with a solid steel core, abrasion-resistant urethane coating, and stainless steel wear ring for durability.
Check Stock

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • ...are x 1/2" Male Pipe, 1/2" Male Flare x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
  • HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It....
Check Stock

Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black

  • ...outdoor Natural Gas or Liquid propane applications to the gas supply piping, such as fire pit gas tube, gas range pipe, water heater gas hose,Generator gas tube,Compressor gas tube,Grill gas line.etc.
  • 【Sturdy material 】- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
  • 【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, reducing the connection point and preventing gas leakage.Really convenient and 100% safety..
  • 【Installation】-High temperature resistance,Low pressure resistance,Explosion-proof and compressive material, it can be installed exposed to indoor light , or it can also be embedded in concrete, or behind the wall in dry wall systems as needed. also Suitable....
Check Stock

Pipe Cutter [1/8\ - 1 1/8\] Tube Cutter Tool for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass - Copper Pipe Cutter - Compact & Tight Space Rigid Tubing Cutter Set for Plumbing

  • HANDYMAN’S BEST FRIEND – Our tubing cutter is especially designed to assist plumbers, electricians & mechanics – whether it’s used as a screw cutter, copper cutter, steel cutter, brake line cutter or an exhaust cutter..
  • PLACE, ADJUST AND ROTATE – Cutting copper tubing has never been easier. Simply, put the tube in the slot where the blade is, adjust to the appropriate setting and rotate your tube. It’s never been this effortless to cut copper tube..
  • NOT JUST FOR COPPER – Our pipe cutting tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminium piping, PVC and iron. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • GREAT FOR SMALL SPACES – Looking for a fantastic copper pipe cutter for tight spaces? Look no further! Our small pipe cutter fits perfectly in restricted spaces. Our metal tube cutter is also great as an accurate arrow cutter..
  • EXTRA BLADE – Our mini pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confid....
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Faucet Supply Lines Connector Stainless Steel Braided Supply Hose 3/8-Inch Female Compression Thread x M10 Male Connector, 24-Inch Long x 2 Pcs (1 Pair)

  • Standard US 1/2 "internal thread, the faucet supply line connector inlet is 3/8" compression connection to the supply stop valve, its outlet is 1/2 "female iron pipe (FIP or IPS), its total length is 11-4/5". There are 6 pieces 1/2 supply line in the package..
  • The 1/2 inch faucet supply lines external and internal are made of high quality 304 stainless steel material, rust proof and corrosion proof, not easy to break, and longer service life..
  • Thick rubber gasket with a high sealing hose, can effectively prevent leakage.The 1/2 inch sink hose is woven of high strength stainless steel to ensure maximum pressure and optimal performance. Let you always avoid the unpleasant of a broken water pipe..
  • The braided faucet line connector is easy to install, flexible hose, easy to handle, sturdy stainless steel nut, plus the hose is equipped with an ABS wrench, no other tools, direct hand tightening to complete installation..
  • The 1/2 inch toilet supply line It can be compatible with most standard size faucets. Suitable for kitchen, bathroom, toilet, washbasin, water heater, toilet, hot and cold water supply, base faucet, etc..
Check Stock

OhLectric 1 Hole 1/2 Inch Pipe Strap - Reinforced Rib For Extra Strength - Zinc-Plated Steel Pipe Strap Clamp For EMT Conduit - Snap-On Installation - Pack Of 100 OL-43022

  • PREMIUM QUALITY: Quality is our foremost priority! Constructed with galvanized steel with a rigid EMT thickness, our pipe straps are sturdy, strong....
  • EXCELLENT FIT: Are you feeling irritated at using old steel pipe straps? The solution is here to make your work easier. This strap takes less time to....
  • IDEAL CHOICE: Stands for the tests of time! Engineered with innovative foldable features, it is used in fixing pipes to various supporting structures,....
  • EASY INSTALLATION: A single hole design makes it easy for the plumber or other installer to secure pipes to any surface! You can reuse our pipe strap....
  • ACCURATE SLIDE SIZE: This wide pipe strap measures ½ inch is the perfect clamp to hold EMT and IMC conduit, metal pipe, pipe, power line or cable for....
Check Stock