Categories

Best Seamless Pipe For Shipbuilding

Rule Evacuator 8000-High Capacity Submersible 12 Volt DC Utility Pump (Yellow/Black)

  • Manual hydraulic water pressure test pipeline tester..
  • Suitable for water,or hydraulic oil as a medium,for a variety of pressure vessels, pipes, valves and other pressure test, but also for hydraulic energy,to provide the required pressure.
  • for chemical, construction, plumbing, oil,coal, Shipbuilding and other industries..
  • Normal tap water pressure of 0.3MPa,high-rise residential 0.4MPa,water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa.(Tap water 0.1MPa 1KG pressure).
Check Stock

aokur DC 12V 5L Transfer Pump Extractor Oil Fluid Diesel Scavenge Suction Vacuum with Siphon Hose and Cigarette Light 60W

  • Maximum Pressure: Max. 0.8MPA，Maximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V.
  • Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.
  • Please use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump.
  • Note: If you want to connect the pump to AC power, you need to have a power converter..
Check Stock

10/2 with Ground Flat Yellow Submersible Well Pump Cable 600V (125FT)

  • Manual hydraulic water pressure test pipeline tester.Fine workmanship and good performance. Easy to use. Durable in use..
  • Suitable for water, or hydraulic oil as a medium, for a variety of pressure vessels, pipes, valves and other pressure test, but also for hydraulic energy, to provide the required pressure.
  • for chemical, construction, plumbing, oil, coal, Shipbuilding and other industries..
  • Normal tap water pressure of 0.3MPa, high-rise residential 0.4MPa, water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa. ..
  • Long working life, It is smooth operation, high efficiency, good performance. Small volume, low noise..
  • Our small pump is designed with a mini size and light weight, it is easy and convenient to use..
Check Stock

Easy to Install 2 Pack Quick Release Pin,Full 316 Stainless Steel, Top Pin, Marine Hardware, All Parts are Made of 316 Stainless Steel Durable (Color : 76mm)

  • Quick Release Pin for bimini top, boat tops and support poles, deck hinge etc.
  • All parts are made of Marine grade 316 stainless steel, Excellent seawater corrosion resistance and durable.
  • Slidable spring and drop cam for easy changing on different size bimini.
  • Can be used for stainless steel pipe clip, ship outfitting, shipbuilding etc.
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Floor Flange Trim Plate, Steel, 3/4 In

  • Price For: Each Inside Dia.: 3/4" Max. Pressure: 150 psi Pipe Type: Pipe Nipple Pipe Size (Nominal): 1/2" Seamless/Welded: Welded Outside Dia.: 3/4" Pipe Schedule: 40 Wall Thickness: 1/16" Temp. Range: -60 Degrees to 450 Degrees F Overall Pipe Length: 4" Pipe Connection Type: Threaded on Both Ends Standards: ASTM A 312 Item: Nipple.
  • Country of Origin (subject to change): China.
Check Stock

Bessey VAS-23+2K Vario Angle Strap Clamp (Pack of 2) (2)

  • 8️⃣[ Multi-purpose ]: The conduit bracket is very practical and can be used for fixing pipes, used for fixing pipes of wood, masonry, stainless steel pipes, plastic pipes, and oil, water and gas media in power hydraulic systems. Used in metallurgy, chemical industry, vehicles, petroleum, chemical industry, shipbuilding and other occasions..
  • 5️⃣[100% Satisfaction Guarantee]: Jersvimc is committed to bringing a pleasant shopping experience to all customers. If anything happens to the product, please feel free to contact us. We solve the problem for you 24 hours a day, you can replace the defective product or return it for a refund within 30 days..
Check Stock

4 Pack Quick Release Pin 1/4\ Diameter w/Drop Cam & Spring - Lanyard Prevents Loss, Full 316 Stainless Steel, Bimini Top Pin, Marine Hardware, Free Installation Screws

  • Quick Release Pin for bimini top, boat tops and support poles, deck hinge etc.
  • SIZE:1-1/2"(38mm) Long, 5/16"(7.5mm) Wide, 1/4"(6.3mm) Diameter.
  • All parts are made of Marine grade 316 stainless steel, Excellent seawater corrosion resistance and durable.
  • Spring loaded pins slidable springs with toggle pin, Help to replace different size of bimini tops easily.
  • Can be used for marine mountain seat, stainless steel pipe clip, ship outfitting, shipbuilding etc.
Check Stock

Hysagtek 6 Pcs Quick Release Pin Boat Bimini Top Pins 1/4\ Diameter w/Drop Cam & Spring, Marine Hardware, 316 Stainless Steel with Pull Ring

  • Quick release pin for boat top deck hinge or boat jaw slide clamp bracket.
  • Material -- Made of Marine grade 316 stainless steel, excellent seawater corrosion resistance and durable.
  • Size -- 53 mm/ 2.1 inches in length (ring is not included), 6 mm/ 0.24 inch in pin diameter, 32 mm/ 1.26 inches in ring diameter.
  • Practial Design -- With spring loaded ball on the needle tip, it can replace the different sizes of bimini tops easily, very useful supplies for using.
  • Main Function -- Can be used for marine mountain seat, stainless steel pipe clip, ship outfitting, shipbuilding etc.
Check Stock

Leadrise 4 PCS 316 Stainless Steel Quick Release Pin Boat Pins w/Drop Cam & Spring 1/4' x 1' Grip Lanyard,Usable Length 1', Bimini Top Pin, Marine Hardware

  • ★【DURABLE MATERIAL:】All parts are made of Marine grade 316 stainless steel, Excellent seawater corrosion resistance and durable.
  • ★【SPECIFICATIONS: 】Bimini top pins have four pieces in a pack，1/4"(6.3mm) Diameter, Usable Length: 1", Overall Length: 1.66".
  • ★【EASY TO USE: 】Quick release Bimini spring loaded clevis pins slid-able springs with toggle pin for easy changing on different size Bimini.
  • ★【WIDE APPLICATION:】Suitable for deck mount, rail mounted Bimini top hinge fittings, marine mountain seat, stainless steel pipe clip, ship outfitting, shipbuilding, etc..
Check Stock

2 Pack Quick Release Pin 1/4" Diameter w/Drop Cam & Spring, Overall Length 1.5", Usable Length 1",Full 316 Stainless Steel, Bimini Top Pin, Marine Hardware, All Parts are Made of 316 Stainless Steel

  • Quick Release Pin for bimini top, boat tops and support poles, deck hinge etc.
  • SIZE:1/4″(6.3mm) Diameter, Usable Length: 1″, Overall Length: 1.66″.
  • All parts are made of Marine grade 316 stainless steel, Excellent seawater corrosion resistance and durable.
  • Slidable spring and drop cam for easy changing on different size bimini.
  • Can be used for stainless steel pipe clip, ship outfitting, shipbuilding etc.
Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

  • 【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • 【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
  • The wall thickness of the steel pipe that can be cut:3-6mm.
  • 【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
  • 【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
  • 【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock