Categories

Best Seamless Ss Pipe

SHYLIYU 1/2HP Stainless Steel 2\ OD Pipe Submersible Bore Pump 1/2 inch Outlet Water Pump 220-240V, 60Hz, Deep Well Pump Screw Submersible Water Pump for Industrial and Home Use

  • Outlet: 1/2 inch, OD Pipe: 2 inch, suitable for well diameters of 2.5 inches and above.
  • Pump Max. head: 55m/180ft ✍ NOTE: Please confirm whether the voltage and frequency compatible with your local standards before you order and NOTE: It is prohibited to use with no water.
  • ❤ Material: stainless steel 201 pump body, outlet is SS304, motor wire is 100% copper, oil motor, screw material is SS and rubber.
  • ❤ Application: with an external hose or pipe connection (top) thread, stainless steel body. Industrial grade heavy duty, also good for home usageIdeal for village, family, farm, camping car water supply, etc.
  • ❤ Perfect for household and utility applications of transferring water from one place to another, solved the water shortage problems of surface water.
  • ❤ One year warranty（Attention: Defects due to improper use of the pump are not within the warranty) and NOTE: It is prohibited to use with no water.
Check Stock

Stainless 2.5" 90 Degree Mandrel Bend Elbow - 14GA/.078" Wall - 1.5" Leg - SS304 Stainless Steel Exhaust Elbow Piping for Car Exhaust Pipe Modified, Stair Handrail, etc - KOTVTM

  • 【Material】: SS304 Stainless Steel 90° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2.5 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, etc.
  • 【OD】: 2.5"/63mm, The outer diameter of the elbow is 2.5". Height（L): 5.51"/140mm.
  • 【Quantity】: Single Elbow. 100% brand new.
Check Stock

Steel Straight Conversion Adapter Fittins 304 SS Pipe Fitting Tube DSJ-M,YDF-LOK,LOK, Ferrule Connector 1/8'' 1/4'' 3/8'' 1/2'',3/8'',8mm Tube

  • Stainless Steel Pipe and Fitting 304 SS Pipe Fitting Tube OD to NPT Thread.
  • Thread sizes : 01: OD 9.7MM G1/8'' 02: OD 12.7MM G1/4'' 03: OD 16MM G3/8'' 04: OD 20MM G1/2''.
Check Stock

ZOEYES 4 PCS Stainless Steel Exhaust Elbow, 2.5”Mandrel Bend Elbow - Thickness 16GA/.065”Wall, SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Stair Handrail, 90 Degree

  • Parameter - 2.5”Exhaust pipe 90 degree elbow.
  • Diameter: 2.5inch, Bend Degree: 90º, Wall Thickness: 16GA/.065”, Back arc length: 6inch (These elbow exhaust pipes can be welded to 2.5”OD tube).
  • Sturdy & Durable - Our 2.5”elbow exhaust pipe made of premium SS 304 stainless steel, smooth edge and mirror polishing.
  • Not easily damage, anti-rust, anti-oxidation 2.5 exhaust pipe.
  • Easy to Install - Laser cut end make the pipe ready to weld and easy to use, the elbow exhaust will save your time and energy.
  • Wide Application - These universal exhaust pipes are suitable replacement for your car modification, stair handrail welding, or complete own custom DIY exhaust system.
  • Package List - You will get valued 4 pieces of 90 bend elbow pipes.
  • No pollution: healthy, environmentally friendly, non-toxic and non-polluting.
Check Stock

KOTVTM 2" Stainless Steel Elbow 45° Mandrel Bend Elbow - 1.5D/3" CLR Loose Radius - 16GA/.065" Wall - 2" Legs - SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Pipeline engineering, etc

  • 【Material】: SS304 Stainless Steel 45° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, Pipeline engineering, etc.
  • 【Quantity】: Single Elbow. 100% brand new.
Check Stock

Elkay Quartz Classic ELGHU3220RBK0 Black 60/40 Double Bowl Undermount Sink

  • Sink Dimensions: 32-1/2" X 20" X 10" Min. Cabinet Size: 36".
  • UNDERMOUNT INSTALLATION: Sink is installed beneath the countertop creating a seamless appearance between the sink and the countertop..
  • EASY TO CLEAN & STAIN RESISTANT: Coordinate your sink color with your décor and style.
  • IMPACT, HEAT & SCRATCH RESISTANT: Moulded from fine quartz sand to resist banging, chipping and scratches.
  • HYGIENE PROTECTION: Material's ultrafine, nonporous structure means food and liquid won't stick to surface.
  • Recommended Bottom Grids: LKOBG1617SS (large bowl), LKOBG1016SS (small bowl).
  • Recommended Drains: LKQS35BK, LKQD35BK, LK99.
Check Stock

Motorized Ball Valve- Stainless Steel Ball Valve with Full Port 9-24V DC and 2 Wire Reverse Polarity by U.S Solid 1 inch

  • RELIABLE AND SAFE- The metal components of this ball valve are made entirely of SS304 and SS316 stainless steel.
  • NPT THREADING-1” thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the....
  • 9V-24V DC- Works effectively over entire voltage range.
  • Limit switch cuts off power after valve is fully open....
  • 2 WIRE REVERSE POLARITY SETUP- Simple two wire connection, valve completely de-energizes after opening or closing.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

STAINLESS STEEL 1 CHECK VALVE for WATER WELL PUMP Pressure TANK FLOMATIC 4201SS2

  • 1" Danfoss Flomatic Stainless Steel Check Valve.
Check Stock

Walker Exhaust Mega-Clamp 33226 Exhaust Clamp

  • For long life, corrosion resistance and a sharp appearance, install the Walker Mega-Clamp.
Check Stock

45\ Aluminum Cam Bar Trailer Lock Assembly SS Mounting Hardware

  • 48" Auminum Trailer Cambar latch & hardware, Non polished finish.
  • Includes 4 - 5/16" x 2" carriage bolts & nylon nuts, washers.
  • SS hasp 2" W x 5 1/8" L, padlockable hole w/ mount bolts & camnuts.
  • Hinges & handle welded to 1" OD Sch 40 Aluminum pipe, non anodized.
  • Hinge pin of corrosion resistant material to prevent binding.
Check Stock

Stainless 2' 90° Mandrel Bend Elbow - 1D Tight Radius - 16GA/.065' Wall - SS304 Stainless Steel Exhaust Bend Pipe Exhaust Piping for Car Exhaust Pipe Elbow Modified, Stair Handrail, etc - ATOTL

  • 【Material】: SS304 Stainless Steel Exhaust Pipe 90° Elbow Exhaust Piping.
  • 【Durable】: Not easily damaged, No rust, anti-oxidation, High temperature resistance.
  • 【Parameter】: OD: 2", Bend Degree: 90°, Wall Thickness: 16GA /.065", Back arc length: 4.9 inch, (can be welded to 2 inches outside diameter pipe).
Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

  • 【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • 【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
  • The wall thickness of the steel pipe that can be cut:3-6mm.
  • 【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
  • 【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
  • 【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock