Categories

Best Seamless Steel Tube pipe

Pipe Cutter [1/8\ - 1 1/8\] Tube Cutter Tool for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass - Copper Pipe Cutter - Compact & Tight Space Rigid Tubing Cutter Set for Plumbing

  • HANDYMAN’S BEST FRIEND – Our tubing cutter is especially designed to assist plumbers, electricians & mechanics – whether it’s used as a screw cutter, copper cutter, steel cutter, brake line cutter or an exhaust cutter..
  • PLACE, ADJUST AND ROTATE – Cutting copper tubing has never been easier. Simply, put the tube in the slot where the blade is, adjust to the appropriate setting and rotate your tube. It’s never been this effortless to cut copper tube..
  • NOT JUST FOR COPPER – Our pipe cutting tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminium piping, PVC and iron. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • GREAT FOR SMALL SPACES – Looking for a fantastic copper pipe cutter for tight spaces? Look no further! Our small pipe cutter fits perfectly in restricted spaces. Our metal tube cutter is also great as an accurate arrow cutter..
  • EXTRA BLADE – Our mini pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confid....
Check Stock

Rubber Cushion Strut Clamp 1" NOM (1-1/8" OD) for Mounting Copper Piping, PEX Pipe, CVPC Tubing to Strut Channels [5 Pack]

  • [QUALITY] Zinc plated to prevent corrosion, the heavy duty steel strut clamp brackets with attached bolt and nut clamp securely over a hard rubber cushion to nearly surround the sides of a pipe or tube..
  • [PROTECTIVE RUBBER CUSHION] The hard rubber cushion protects pipe and tube by absorbing shock caused by vibration and temperature changes, reduces unwanted noise, insulates pipe and tubing from metal surfaces, and prevents galvanic corrosion..
  • [APPLICATION] Insert pipe or tube into rubber cushion inside steel strut brackets. Mount strut clamp legs to 1" NOM (1-1/8" OD) strut channels. Attach nut to bolt and tighten..
  • [CONTENTS] Each of the 5 clamps contain two heavy duty zinc plated steel half brackets with attached bolt, a nut, and protective rubber cushion..
  • [VERSATILE] Use for 1" NOM (1-1/8" OD) copper pipe, PEX pipe, CPVC tube, and other conduit tube, hose, and wire applications. Can be hung vertically and horizontally on walls and ceilings. Compatible with unistruts in 1-5/8", 7/8", 13/16" heights..
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

WGLAWL Durable Stainless Steel Tent Stove Chimney Pipe Kit Single Wall, Chimney Spark Arrestor, Fireplace Chimney Rain Caps,2.36 Inch/6cm Diameter Chimney Pipes,Camping Stove Accessories

  • MULTI-PURPOSE: This stainless steel stove flue pipe is specially designed for outdoor camping wood stoves with good heat and abrasion resistance. The flexible combination of straight pipes and elbows allows the stove to be used in more places, such as hot tents, hammock tents and RVs..
  • PRODUCT MATERIAL: Tent Stove Chimney Pipe is made of sturdy stainless steel. The stainless steel material has the characteristics of corrosion resistance, which determines the longer service life of stainless steel products. In addition, stainless steel has good high temperature resistance and can keep the product stable at high temperatures..
  • THICKEN THE CHIMNEY TUBE: the thickness of the chimney tube is 0.5mm. Compared with some easily deformable chimney pipes on the market, we use thicker pipes. The material is sturdy and not easy to deform by hand, which can ensure a longer life of the furnace tube..
  • CHIMNEY SIZE: The diameter of the chimney pipe of the camping stove is 6cm/2.36 in. Please confirm the diameter of the chimney pipe of the camping stove before placing an order..
Check Stock

AMZCNC Compact Bender Kit with Reverse Bending Attachment for 1/4 - 7/8 Tube and Pipe Bending Premium Ratcheting Tube Bender

  • 【High quality material】: The main body of the tube bender of The copper tube bending tool kit is made of stainless steel, which is pressure....
  • 【Wide range of application】: This pipe bender tool kit is suitable for pipe benders of 1/4"-7/8", applicable pipe materials: copper pipe, aluminum....
  • 【Easy to install】: The pipe bender is easy to install, easy to assemble and operate, and easy to get started. Support pipe diameter: 1/4.
  • 【Ergonomic design】: CT-999 pipe bender conforms to ergonomic design. The kit is made of 304 stainless steel, steel fiber, iron and other....
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe....
Check Stock

WADEO HVAC Repairing Tools, Air Conditioner Copper Tube Swaging Tool with Expander Drill Bit, Copper Pipe Cutter and Deburring Tool for Copper, Aluminum and Thin Stainless Steel Tube

  • Drill Bits: Made of durable and wear-resistant bearing steel, it is not easy to break, When the air conditioner is installed, These drill bits can expand the copper pipe, so you can link the two copper pipes to each other..
  • Mini Copper Pipe Tubing Cutter(1/8" - 1 1/8"): It can cut copper tube, steel pipe, stainless steel tubing, aluminium piping PVC and iron. But we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • Deburring Tool: With ergonomic handle for secure grip, the blade is mounted on the handle can be rotated 360 degrees, this tool helps to clean the top of the pipe or tube and it has a compact size which is easy to be carried to anywhere.(The blade is hidden in the pen holder).
  • Drill Bits Size: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • Package Include: 3-28mm（1/8"-1-1/8"）Tube or Pipe Cutter*1.
Check Stock

ZCEN Mini Pipe Tubing Cutter for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass

  • The main body of the pipe cutter is made of lightweight and durable aluminum castings, and the blades are made of CNC machining with most durable alloy steel..
  • Rotate the knob to clamp the tube, Revolve the tube cutter around the pipe, and tighten the clamp steadily after each turn until it is completely cut..
  • Designed for tight spaces, the height of 2 inches allows you to use it in cramped spaces on small diameter pipes..
  • Used for cutting copper, brass, aluminum, thin steel, and PVC pipes with an outer diameter of 1/8 to 1-1/8 inches (3-28 mm). It's even used as a brake wire cutter or exhaust pipe cutter..
  • If you have any quality issues with your Tube Cutter, please feel free to contact customer service for troubleshooting help, replacement, or refund..
Check Stock

Libraton Tube Cutter, Mini Tubing Cutter, Heavy-duty Pipe Cutter with Deburring Tool for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube..
  • [Mini Cutter] The mini tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • [Copper Tube Cutter] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
Check Stock

Bravex Tubing Bender Pipe Tube Bender Kit Refrigeration Ratcheting Hand Tool 1/4 to 7/8 Inch with Tube Cutter/Deburring HVAC Tool Refrigeration System Maintenance

  • Suitable Tube Sizes: 1/4“, 5/16“, 3/8“, 1/2”, 5/8“, 3/4“, 7/8”, the maximum bending angle is 90 degrees, supports reverse bend. Bends pipes in both “forward” and “reverse” configurations..
  • The pipe bender is made of 40Cr steel & 45# steel with high precision machining. The aluminum alloy tube bender heads (replaceable) are firm and durable, preventing pipe deformation. The super long handle increases the leverage, making this tool both convenient and labor-saving..
  • Comes with pipe cutter, suitable for cutting heavy and hard materials, such as thin stainless steel (thickness.
  • Also includes a deburring tool made of solid plastic structure and high-speed steel bald head. It can quickly, cleanly and easily enlarge the inner diameter of different pipes (such as copper, aluminum, PVC and stainless steel pipes)..
  • If the pipe crack when bent,try heating and cooling to soften the pipe,and it will make perfect bends. Applications：automobile maintenance, refrigerator maintenance, Hvac work, hydraulic systems, etc..
Check Stock

nuwfrog Tubing and Pipe Cutter 1/4 to 2-5/8 Inch with Extra Blade for Pipe Copper Thin Stainless Steel Tube

  • 【Efficient and convenient】 The operation of cutting Thin Stainless Steel Tube, Metal,Brass - Copper Pipe Tubing from 1/4"-2-5/8" (6-64mm) O.D. becomes more easy, clean and efficient. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • 【Fine workmanship】High-quality alloy steel grinding blades, extremely sharp.The body is made of lightweight,durable aluminum alloy casting..
  • 【Versatile】This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops..
  • 【Ergonomic design】Knob provides a firm grip. Cutting tubes become a comfortable and quick task..
  • 【EXTRA BLADE】Our pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confidence..
Check Stock

Bravex Tube Cutter 1/4\ to 2\

  • [High-quality Blade] This pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel blades. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes)..
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [100% Money-Back Guarantee] If you're not satisfied, return back to us, no-hassle refund or product replacement..
Check Stock

Senyar Exhaust Pipe Expander Tool Set, Tail Expander Kit 1‑1/18in to 3‑1/2in Steel Muffler Spreader with Storage Case

  • ...ll LCD monitors from 1-1/8 inches to 3-1/2 inches. Thin-walled tube, versatile. It is used to extend the length of the pipe proportionally so that the pipe has the same diameter instead of a cone. Please double check the part number of your item before you buy, matching information is for reference only..
  • 【Quality Steel Material】The exhaust muffler adopts a forged and heat-treated steel structure to improve strength and durability. This product includes three different expander sizes. It is used to extend the length of the pipe proportionally so that the pipe has the same diameter instead of a cone. Install the auto parts on the standard exhaust system..
  • 【Easy to Use】The pipe can be expanded with a simple wrench turning to repair and install the exhaust system. Simply choose the correct size expander for your pipe, insert it into the damaged pipe end, and turn the rotating rod of the expander until the dent is removed..
  • 【Prevent Loss】We provide a sturdy storage box, the terminal can be placed in any shelf or storage area after use, it can effectively prevent the loss of tools..
  • 【Suitable For】This tail pipe expander is suitable for all LCD monitors from 1-1/8 inches to 3-1/2 inches. Thin-walled tube, versatile. It is used to extend the len....
Check Stock

VEVOR Tube Bender, 1/2 inch Pipe Bending Capacity 180 Degrees Manual Bending, for Aluminum and Stainless Steel Pipes in HVAC, Heating Pipe System

  • 1/2" Bending Capacity: The tube bender can quickly and smoothly bend 1 mm thickness tubes. And the tool is suitable for 1/2 inch (12.7 mm) pipe diameter. Made of high-strength steel material, it is a robust tool built to last..
  • Versatile Use: The pipe bender is suitable for copper, stainless steel pipes. Universal tubing bender is used in many fields, including construction sites, pluming jobs, heating and sanitary installations, garage and vehicle repair, home improvement..
  • 180° Bending Angle: The brake line bender can easily bend the pipes from 0 to 180 degrees. A clear scale mark makes the bending angle more accurate. Bending radius: 0.6 inch/14 mm..
  • Energy-Saving Structure: The steel brake bender adopts a 16 inch/40 cm handle with an ergonomic design for effortless operation. The handle can be reversed, thus tubes won’t be reformed. Compact design allows easy carrying, lightweight but gives enough bending force..
  • Easy to Operate: Our 1/2 inch pipe bender features easy and quick operation. First, open the tube bender, place a tube. Then align the zero mark before bending and slowly pull the shoe handle to the angle you want. Finally, you will get a bent pipe..
Check Stock