Categories

Best Segment Blade Segments Blades

Delta Diamond Kick-Asphalt 8 Inch Diamond Blade, Segmented, Wet/Dry Cutting Asphalt, Green Concete, Masonry Block, and Similar Materials (8\)

  • PREMIUM DIAMOND BLADE - Kick-Asphalt uses premium diamond segments and is designed to cut asphalt, green concrete (poured within 72 hours), masonry block, and similar abrasive materials..
  • 10MM SEGMENTS - 10MM tall diamond segments maximize cutting life and provide a low cost per cut..
  • DEEP U GULLETS - This unique segment/keyslot design allows for better air cooling and chip deflection resulting in better performance..
  • SPECIFICATIONS - 8" diameter X .090 thick with a diamond-7/8" arbor. Also included is a 5/8" bushing. Fits most hand-held angle grinders and circular saws. Heat-treated high-speed steel core is guaranteed to withstand the demands of dry cutting. Expected blade life is approximately 4,000 inch feet (one inch foot = 12" length X 1" depth). The recommended operating speed is 4,500 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charg....
Check Stock

SHDIATOOL 10 Inch Wet Tile Saw Blades Cutting Ceramic Porcelain Marble Pack of 2

  • Hot-pressed diamond cutting blades with Hook Slot.
  • Arbor: 25.4mm with a 16mm reducer washer.
  • Laser cut hook slot on core steel, lower the noise, increase the sharpness of the blade.
  • Wet cutting, short time dry cutting is available and is better than regular one.
  • High quality #50/70 diamond grain and continue design segments provide low chip cutting performance.
Check Stock

Virginia Abrasives 425-07388 UV Multi-Purpose High Speed Diamond Blade (14\) Asphalt/Concrete Cutter - Wet or Dry - High Speed Cutoff - Performance Cutting Blades (14\ x .125\ x 1\/20mm DP - 10mm Segments)

  • ... Virginia Abrasives laser welded diamond blades are ideal for concrete cutting, or dry cutting, due to their high welding strength. Our laser welded diamond Blade will have a longer life span and stronger cut than brazed diamond blades as the bond between the segment and core is significantly stronger..
  • LASER WELDED SEGMENTS: Rather than sintered blades that have a shorter life and do not cut as efficiently, the Virginia Abrasives diamond saw blades are laser welded to extend the life of every saw diamond blade as well having the ability to cut faster..
  • HIGH-LEVEL PRECISION: As well as reducing the strain on the concrete structure, the high-performance nature of our diamond concrete saw blades make sure it gives it a smooth cut. For more comfort and high-speed cutting, choose our saws blades for your next project..
  • DURABLE: Virginia Abrasives diamond saw blades are highly durable compared to other types of concrete cutting blades out there. Our diamond blade is made using a circular steel cutting disc with huge 12-mm segments on the outer edge that will maintain precision and performance for a long time.
  • OUR STORY: Virginia Abrasives' roots date back to the early 1970s when a hard rock garnet mining business in the Adirondack mountains of New York. ....
Check Stock

(3 Pack, 4 1/2 inches) GRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Dry and Wet Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete, Ceramic & Kerb

  • ✔︎ CONTINUOUS RIM BLADE has a high content of soldered diamond segment that makes its ideal for cutting ceramic & ceramic tile..
  • ✔︎ TURBO BLADE - diamond blade for cutting most materials including concrete, tile, stone, ceramic, paving flag, marble, granite, brick, masonry & curb..
  • ✔︎ SEGMENTED BLADE – diamond blade has teeth with diamond segments that allow cutting stone, marble, granite, brick, masonry & paving flag..
  • ✔︎ Our blades are suitable for DRY & WET CUTTING and can SELF-SHARPEN by erasing diamond grits during operation(2 or 3 cuts on silicon/abrasive stone)..
  • ✔︎ SPECIFICATIONS: Diameter: 4 ½ Inch (115 mm), Arbor: 7/8 Inch with 5/8 Inch adapter, Cutting width: 2 mm/2.5 mm/2mm, Segment height: 10 mm/10mm/7mm..
Check Stock

Delta Diamond Cougar S 14 Inch Premium Diamond Saw Blade, .125 X 1\-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/ Rebar, Masonry, Stone, Laser-Welded Segmented (14\)

  • ...e (up to 9,000 psi) wtih rebar, asphalt, green concrete, masonry, hard stone (such as quartzite) and all similar materials..
  • USE WET OR DRY - Use Cougar S 14" diamond blades wet or dry. The center core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • PREMIUM TURBO SEGMENTS - Alternating notched turbo diamond segments cut through material with greater efficiency than all flat, smooth segments. The result is a concrete cutting blade that cuts fast and straight with minimal stress on the operator and machine..
  • SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 8,000 inch feet (inch foot=12" long cut X 1" depth)..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool ....
Check Stock

Delta Diamond Cougar S 16 Inch Premium Diamond Saw Blade, .125 X 1\-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/ Rebar, Masonry, Stone, Laser-Welded Segmented (16\)

  • ...e (up to 9,000 psi) wtih rebar, asphalt, green concrete, masonry, hard stone (such as quartzite) and all similar materials..
  • USE WET OR DRY - Use Cougar S 16" diamond blades wet or dry. The center core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • PREMIUM TURBO SEGMENTS - Alternating notched turbo diamond segments cut through material with greater efficiency than all flat, smooth segments. The result is a concrete cutting blade that cuts fast and straight with minimal stress on the operator and machine..
  • SPECIFICATIONS - 16" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 4,750 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 9,000 inch feet (inch foot=12" long cut X 1" depth)..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool ....
Check Stock

Zubastick Dental Finishing Polishing Strips Universal Kit 75 psc

  • blue-green segments for gross reduction (№ 1.050) - 25 pcs., green-yellow segments for contouring (№ 1.051) - 25 pcs., yellow-white segments for polishing (№ 1.052) - 25 pcs..
  • Thickness: blue segment - about 140 µm, green segment - about 120 µm.
  • Thickness: yellow segment - about 100 µm, white segment - about 90 µm.
Check Stock

Delta Diamond Mad Dog HS 7 Inch Segmented Diamond Saw Blade, .095 X DM-7/8\-5/8\ Arbor, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (7\)

  • PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength..
  • WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials..
  • HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades..
  • SPECIFICATIONS - 7" diameter X .095 thick with a Diamond Knockout-7/8" arbor. Preinstalled 5/8" bushing for adapting to other circular saws and grinders. The maximum safe operating speed is 8,730 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Mad Dog HS 9 Inch Segmented Diamond Saw Blade, .095 X DM-7/8\-5/8\ Arbor, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (9\)

  • PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength..
  • WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials..
  • HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades..
  • SPECIFICATIONS - 9" diameter X .095 thick with a Diamond Knockout-7/8" arbor. Preinstalled 5/8" bushing for adapting to other circular saws and grinders. The maximum safe operating speed is 6,700 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Mad Dog HS 12 Inch Segmented Diamond Saw Blade, .125 X 1\-20mm Arbor, Made in USA, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (12\)

  • PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength..
  • WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials..
  • HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades..
  • SPECIFICATIONS - Made in USA. 12" diameter X .125 thick with a 1" arbor fits most masonry saws and hand-held saws. Preinstalled 20mm bushing for adapting to other power saws. Drive pin hole for walk-behind / self-propelled saws from 8-24hp. The maximum safe operating speed is 6,300 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Cougar HS 14 Inch Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\)

  • ...gregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced ....
Check Stock

Delta Diamond Mad Dog HS 14 Inch Segmented Diamond Saw Blade, .125 X 1\-20mm Arbor, Made in USA, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (14\)

  • PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength..
  • WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials..
  • HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades..
  • SPECIFICATIONS - Made in USA. 14" diameter X .125 thick with a 1" arbor fits most masonry saws and hand-held saws. Preinstalled 20mm bushing for adapting to other power saws. Drive pin hole for walk-behind / self-propelled saws from 8-24hp. The maximum safe operating speed is 5,460 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Cougar HS 10 Inch Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .095 X DM-7/8\-5/8\ Arbor (10\)

  • ...gregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 10" diameter X .095 thick with a standard DM-7/8"-5/8" Arbor. Fits most 10" concrete saws and masonry saws. Make sure to check your saws arbor to ensure correct fitment. Max. 6,115 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free....
Check Stock