Categories

Best Selected Frequency Components

Ranjaner 1Hz-50MHz Frequency Counter Kit, DIY Module Board for Oscillator, Crystal Measure Frequency Meter Accessories

  • You can use the universal USB 5V interface power supply, can also use an external DC power supply or 9V battery..
  • The number of components is small, all straight-line components, installation and commissioning simple..
  • Addition and subtraction frequency settings for the measurement of radio transceivers and other equipment..
  • You can select the power saving mode, if the frequency is not obvious changes within 15 seconds automatically turn off the display..
  • Measurable frequency range 1 Hz -50 MHz. Can measure the oscillation frequency of most commonly used crystal..
Check Stock

CCZ Melody in Ear Monitor, Dynamic Hybrid Dual Driver in Ear Earphones 1BA+1DD HiFi Wired Headphones Musicians IEM Upgrade Deep Bass Suitable for Bass Vocals Pop Folk ACG (No MIC, Transparent)

  • ...avity, providing a more comfortable, stable and lighter experience..
  • 【OFC cable go with 2.3g singal Headphone head】 Melody headphone adopts 4 core 4N OFC cable with 0.78MM 2PIN design, giving a boost to transparency, separation, sound field, sound background, vocal and instruments.The earphone adopts lightweight components. A single earphone weighs only 2.3g, light to wear, releasing the burden of ears.At the same time, the detachable cable allows you more optional..
  • 【One year warranty】 We provide a one year warranty for our products, which means that if there is any problem with this product during this year, we will solve it for you and provide you with a satisfactory result.
Check Stock

KOOBOOK 1Set 1Hz-50MHz Frequency Counter Meter Crystal Oscillator Digital Tester Meter DIY Kit 5-Digital LED Display

  • This is a PIC microcontroller based on the frequency meter, with a crystal measurement function and programmable addition and subtraction frequency settings..
  • Five digital display, easy and intuitive, all use of in-line components, the circuit is simple and easy to produce..
  • You need to solder and assemble by yourself, all the components are directly inserted, and the wire is printed correctly according to the PCB. After welding, the signal is input with the standard signal source, and the yellow adjustable capacitor is adjusted to make the display value equal to the signal frequency..
  • The power supply can use a USB to 3.5mm power cable, or you can directly input a 5-9V DC power supply at the - and + pads..
  • It can measure the frequency range from 1 Hz to 50 megahertz (1Hz-50MHz), can measure the oscillation frequency of most common crystal oscillators, and measure equipment such as radio transceivers..
Check Stock

Sennheiser HD 650 - Audiophile Hi-Res Open Back Dynamic Headphone

  • Specially designed acoustic silk ensures precision damping over the entire frequency range and helps to reduce THD to an incredible 0.05 percent.
  • Improved frequency response is 10 39,500 Hertz ( 10 dB).
  • Highly optimized magnet systems for minimum harmonic and inter modulation distortion.
  • High power neodymium magnets deliver maximum efficiency.
  • 3.5 millimetre jack plug. Frequency response (Headphones):10 41000 Hz.
  • Lightweight aluminum voice coils for very fast transient response.
Check Stock

RF Oscillator Module, VCO 515MHz-1150MHz Voltage Controlled RF Oscillator Frequency Source Broadband Oscillator Module

  • [Strong compatibility]:For Yaesu FT-817/857/897 and other models for temperature-compensated crystal components, fully compatible with the original TCXO-9..
  • [High stability]:he frequency is 22.625MHz, which can improve the stability of the machine after replacing the original crystal. It is superior to the original module in different environments..
  • [High cost performance]:The price is only 15% of the original module, and the cost performance is extremely high..
  • [Effect is remarkable]:Actual test the frequency of the crystal is observed with a high-precision frequency meter. The original crystal frequency is deflected with a fire-baked , but this temperature-compensated crystal has no obvious change, and the effect is remarkable..
  • [Simple operation]:Turn off the power of the machine, open the cover of the machine, find the position where the temperature compensation crystal is installed. You need to unplug the ordinary crystal of the machine, then insert it according to the stitching of the machine. After installation, you can start using it without any settings..
Check Stock

Liyafy 1Hz-50MHz Crystal Oscillator Tester Frequency Counter Tester Measuring Meter Case Durable DIY Led Kit

  • High abrasion resistance, sturdy and durable, Transparent casing effectively protect the Frequency Counters body..
  • Programmable addition and subtraction frequency setting for the measurement of radio transceiver and other equipment..
  • Automatic range conversion, without human switch.
  • Can measure most commonly used crystal of oscillation frequency..
  • The power saving mode can be selected. If the frequency is not changed automatically in 15 seconds, the display will be closed automatically..
  • The power supply range is wide, which can be powered by USB interface of general motors, or 5-12v or 9V battery for external power supply..
Check Stock

Donner Beltway Looper Pedal 3 Playback Modes USB Import/Export 10 minutes Loop Pedal Unlimited Overdubs Undo/Redo

  • [3 playback modes] Compact, intuitive looper with 3 playback modes :1/2 Speed – 1/2 Speed playback, Normal – Normal playback, Reverse – Reversed....
  • [24-bit Recording and Playback] The Beltway looper offers you 24-bit high quality recording/playback and 32- bit signal processing that give you a....
  • [Type-C USB] Use a USB cable to connect Beltway looper to your computer to import/export loop phrases. Enter firmware upgrade mode, upgrade the....
  • [Undo/Redo and Overdubs] The Beltway looper supports unlimited overdubs. You can undo/redo your last recording by holding the footswitch after....
  • [Carefully Selected Components] Beltway looper is designed and built with carefully selected components to ensure the best sound quality and road....
Check Stock

FOCAL Alpha 80 Studio Monitor (Single)

  • General Size: Near-field System type: Active Configuration: 2-way Drivers Low-frequency driver: 8" Mid-frequency driver: Not applicable High-frequency driver: 1" Full-range driver: Not applicable Driver type: Polyglass Sound Frequency response: 35Hz - 22kHz Max peak SPL: 109 dB Amplifier class: AB Output power: 140W Onboard Features Input connectors: XLR, RCA Standby mode: Yes A.
  • The Focal Alpha 80 is a versatile studio monitor with quality components and design.
  • It serves beautifully in a variety of capacities, performing just as well with instrumental music as with electronic music.
  • This model comprises an 8" (21cm) woofer/ midrange speaker with a Polyglass cone loaded in a large laminar port associated witha 100W amplifier and a 1" (25mm) aluminum inverted dome tweeter (40W amplifier).
  • Alpha 80 has a frequency response of 35Hz to 22kHz (+/- 3dB).
Check Stock

Ryan's DIY Dancing Slime!

  • High-fidelity Sound System – This DIY speakers kit with many components that are much more expensive high-end systems. Perfect as rear/side surround home theater speakers for a 5.1, 7.1 or 11.1 setup..
  • 3 Way Bookshelf Speakers - Adopts three-way fourth-order speaker system reverse-phase design, with a luxurious and elegant appearance, high-end components included easy to set up and more stable excellent performance..
  • Low Frequency - 6.5-inch large-diameter mid-bass unit L6-4R. Its diaphragm is made of all-black Kevlar fibre, an ultra-light and high-strength integrated composite material, a fatigue-resistant long-stroke rubber diaphragm folding ring, a highly compliant centering support piece, a unique magnetic circuit system with phase plug design, and a large magnetic steel drive unit..
  • The mid-range unit uses a professional DN Series soft dome mid-range unit, with a high-quality diaphragm coated on the outside with a special damping material, and an independent dome mid-range unit to avoid the mid-range defect caused by the connection of the two frequency bands. The sound is sweet, natural and smooth..
Check Stock

MartinLogan Motion SLM X3 Ultra-Slim 3-Channel Passive Soundbar - Black

  • L-C-R soundbar, Slim design, Binding Posts: Push style.
  • High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
  • Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
  • Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
  • Frequency Response: 120–23,000 Hz ± 3 dB.
  • Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
  • Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
  • Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
  • Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".
Check Stock

MoCA 2.5 with 2 Gigabit Ethernet Ports - Ethernet Over Coaxial Adapter (2 Pack) | Model: TL-MC84

  • MoCA 2.5 offers actual data rates up to 2.5 Gbit/s, continues to be backward interoperable with MoCA 2.0 and MoCA 1.1, and adds MoCA protected setup (MPS), Management Proxy, Enhanced Privacy, Network wide Beacon Power, Bridge detection and TR-069 remote management..
  • Flexible frequency selection: It works at high frequency range. Frequency range is between 1125~1675 MHZ. Channels can be flexibly selected based on network condition..
  • Strong interference-proof capability: Physical layer adopts advanced ACMT mode that isOFDMA, which makes it to get strong interference-proof capability by avoiding high noise at lower frequency..
  • Advanced data link layer agreement: Link layer adopts TDMA protocol, MP2MP structure. Each device can communicate with any other one. All the adapters adopt the same TDD..
  • Absolute bandwidth supply: MOCA 2.5 adapter supports up to 3.0 Gbps throughput with low packet loss rate and low latency..
Check Stock

KZ ZSE Dual Dynamic Driver Earphones Extra Bassy in-Ear Earbuds Headphones (Without Mic)

  • Professional Acoustic Design. Pick up one of high-pitched pronunciation driver+1 low frequency driver open-train double dynamic structure.Professional Acoustic Design. Pick up one of high-pitched pronunciation driver+1 low frequency driver open-train double dynamic structure..
  • Amazing Sound Quality. 99% of the current headsets can not meet the standard of 20-45 KHZ frequency width. It’s totally beyond your imagination. Independent bass frequency dynamic driver enhances general music administrative levels and lets every beat feel a strong bass..
  • Ergonomic and chic design. Transparent cavity is made of PC resin materials. Internal components can be clearly seen..
Check Stock

Crystal Oscillator Frequency Counter Tester Meter, DIY 1Hz-50MHz Frequency Indicator Crystal Oscillator Tester Module Kit with 5 Digits Digital Tube Display Red

  • This is a frequency meter based on PIC microcontroller, with crystal vibration measurement function and programmable frequency settings..
  • With five-digit digital tube display, the measurement data display is intuitive and convenient..
  • All of them use direct-plug components. The circuit is simple, easy to make, easy to install and debug..
  • The measuring frequency range of this DIY frequency meter is 1Hz-50MHz, which can measure the oscillation frequency of most commonly used crystal oscillators..
  • Five-bit resolution (e.g. 0.0050kHz, 4.5765MHz, 11.059MHz) supports automatic range conversion..
Check Stock