Categories

Best Self Tightening Chuck

Annular Cutters Arbor, MT4 to 1-1/4\ Weldon Shank, Drill Press Extension Adapter (Morse Taper 4) for Magnetic/Radial/Bench/Lathe/Vertical Drill Machine

  • Integrated design maximizes rigidity & accuracy.
  • Integral shank is more compact than a combined drill chuck and arbor and eliminates the chuck slipping on its arbor.
Check Stock

Mophorn Lathe Chuck 4inch “C” Series Chuck Self-centering Lathe Chuck Independent 4 Jaws Mini Lathe Chuck Wood Lathe Bowl Chuck for Woodworking Chuck

  • ...re and operate. We give a universal adapter as a gift for kinds of countries to use, and the precise thread inside and texture outside make the whole looks more pretty..
  • Complete Accessories: Includes screw chuck stud. It also includes an T-shaped Allen wrench and a set of tightening levers, which give a great help to chuck installation and removal..
  • Wide Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

Mophorn Lathe Chuck 4-inch Nova Chuck Self-centering Lathe Chuck Independent 4 Jaws Mini Lathe Chuck Wood Lathe Bowl Chuck with Set of Accessories in Steel for Woodworking Chuck

  • ... store and use. We give a universal adapter as a gift for kinds of countries to use, and the precise thread inside and texture outside make the whole looks more pretty..
  • Complete Accessories: Includes screw chuck stud. It also includes an T-shaped Allen wrench and a set of tightening levers, which give a great help to chuck installation and removal..
  • Wide Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

PSI Woodworking CSCBARR52 Barracuda Insta-Change Jaw Chuck System

  • remove and replace all 4 jaws in less than a minute.
  • jaws will snap into place for a secure mount.
  • use the included jaw removal tool to pop them off the chuck body.
  • Instar-change jaw chuck system includes: barracuda chuck body, set of #2 round jaws, set of pen blank drilling jaws, woodworm screw chuck, jaw tightening key, jaw removal tool, storage case.
  • Barracuda chuck body: pre-threaded at 1" X 8TPI, weighs 4 lbs. , diameter 3. 5.
Check Stock

Chuck handtite keyless 1/2-Inch carded

  • For those that prefer traditional keyed drill chucks, these chucks offer precision and nearly unlimited mechanical advantage for tightening and loosening drill bits and tooling. These 1/32" - 5/8" JT33 Taper drill chucks have knurled grips and the chuck key is included..
  • Arbor hole tapers from .80 inches at the opening (bottom of chuck) to .78 inches 1/2" down into the arbor hole. This gives a good fit profile for getting the correct chuck for your drill press.
Check Stock

TEXALAN Woodworking Drill Chuck with 2 Morse Taper Mount 5/8 INCH

  • [Installation]: This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
  • [Packing]: Includes the 5/8 inch Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.
  • [Application]: Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
  • [Usage]: Tightens with a Chuck key for excellent grip. Removes easily with knock out bar.
Check Stock

DEWALT DCK590L2 20-Volt MAX Li-Ion 3.0 Ah 5-Tool Combo Kit

  • Power Tool Type: Cordless. 20V MAX hammer drill with patented 3-speed all-metal transmission and 1/2-inch self-tightening chuck.
  • 20V MAX reciprocating saw with key-less blade clamp allows for quick blade change.
  • 20V MAX 1/4-inch impact driver features 3 LED lights with 20 second delay to provide visibility.
  • 20V MAX LED work light delivers 110 lumens of light output.
  • 20V MAX circular saw with 6-1/2-inch carbide blade can cut 2-by-4’s at a 45-degrees angle.
Check Stock

Cordless Drill, Maxlander 20V 1/2'' Drill Set with 2.0Ah Battery and Charger, Power Drill Cordless for Concrete Wall, Wood, Metal - Variable Speed

  • ... 【Humanized Design】Equipped with built-in LED Light to make your work easier in dark or confined spaces. The Auxiliary Handle can be installed in both directions, to offer stable control and improve vibration reduction. Also have 20-position clutch for torque control to avoid stripping / over tightening screws..
  • 【Wide Applications】You can always believe powerful and excellent configuration of Maxlander hammer drill cordless. It has 3 modes: DRILL, SCREW, HAMMER, can offer a wide range of applications in various material and situation. No problem operating on wood, tile, steel, concrete, putty podwer mixing etc..
  • 【What's in the Package】1 * Maxlander cordless hammer drill driver, 1 * 20-Volt battery, 1 * 1 Hour fast charger, 5 * Twist drills for wood/steel, 3 * Woodworking flat drill, 1 * Auxiliary Handle, 1 * User manual..
Check Stock

LittleMachineShop.com 0XA Quick Change Tool Post Set for 8x12, 8x14 Lathe (4083)

  • 【EXCELLENT QUALITY】：The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
  • 【APPLICABLE WORKPIECE SIZE】：The clamping range of the lathe chuck is approx 8×8 to 23×23mm for square shaped material.Weights 1.43 pounds, and 2.5" diameter..
  • 【FREE ACCESSORIES】：We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws..
  • 【HIGH PRECISION DESIGN】：This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness..
  • 【WIDE APPLICATION】：Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market..
Check Stock

Drum Sander, Sanding Drum Set 2.35mm Shank Rotary Sander, 180-5000 Grits Rotary Sander for Stone Polishing and Woodworking Set of 10 (1200 Grit)

  • Package contains: These sanding drums include 330 pcs sanding drums (80 grains, 120 grains, 240 grains) and 12 pcs sanding drum mandrels, extra gifts 2 pcs self-tightening drill chuck and 1 pc combination wrench, totally 345 pcs in 1 set.
  • Univeral drum mandrels - 12 pcs reusable drum mandrel shanks including 3 diameters(1/2.
Check Stock

DEWALT DCK590L2 20-Volt MAX Li-Ion 3.0 Ah 5-Tool Combo Kit with Titanium Pilot Point Drill Bit Set 21-Piece

  • 20V MAX hammer drill with patented 3-speed all-metal transmission and 1/2-inch self-tightening chuck.
  • 20V MAX reciprocating saw with key-less blade clamp allows for quick blade change.
  • 20V MAX 1/4-inch impact driver features 3 LED lights with 20 second delay to provide visibility.
  • Titanium pilot point for longer bit life.
Check Stock

0.3-3.2 Clamping Grinder Chuck Key M8 for Car Garages(Short tail M8x0.75 chuck + rod set)

  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
Check Stock

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Warehouses Offices(Short tail M8x0.75 chuck + rod set)

  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
Check Stock