Categories

Best Self aligning Bearings

Brush Research 14353 Automotive Flex-Hone Kit, Silicon Carbide Abrasive, 180 Grit (Pack of 10 Different Sizes)

  • [QUALITY]- Proudly made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options..
  • [INCLUDES]- 10 Piece kit features Flex-Hone sizes: 10mm, ½, 5/8”, ¾”, 7/8”, 1”, 1-1/4”, 1-1/2” 1-3/4” and 2”.
  • [IDEAL FOR]- Silicon carbide abrasive globules in 180 grit are self-aligning and self-centering-- ideal for mild steel, stainless steel and cast iron.
  • [DESIGN]- 8” overall length with a durable stainless steel stem that can be used in any collet, chuck or similar holding device.
  • [APPLICATIONS]- refinishing brake calipers, brake cylinders, lifter bores, and u-joint yokes, bearings, bushings or any cylinder needing deburring or finishing..
Check Stock

SUCSFL 204-12 Stainless Steel Flange Bearing Unit 3/4\ Bore with Set Screw Suitable for Engines & Pump Paper Mill Off-Shore

  • The bearing comes with a stainless steel Pillow Block bearing with a set screw.
  • Solid Base /Self Aligning pillow Block Bearings.
  • Bearing Material: It is made up of premium quality 440C Stainless Steel.
  • Bearing LubricationFDA/USDA-H1 Solid Grease.
Check Stock

Boston Gear LHA2 Self-Aligning Ball Bearing, Spherical, Precision, 0.165\ Bore, Steel

  • Size - Model: 1029 (Inner Diameter=9mm, Outer Diameter=26mm, Thickness=8mm).
  • Material - Rolling Balls are made of chrome steel with good surface quality, good hardness, load capacity, and wear resistance. The cage is made of stamping steel..
  • Features - Double row, open type. ABEC1 accuracy, normal clearance..
  • Applications - Suitable for applications such as drive shafts where the shaft and housing are difficult to center and where the shaft is prone to deflection..
  • Package Content - 1 x Self-Aligning Ball Bearings.
Check Stock

Antrader Pillow Block Bearing 10mm Bore Diameter Zinc Alloy Bearing Housing KFL000 Flange Bearing Pack of 4

  • 10mm Bore Diameter self-aligning, pillow block bearing, you can adjust or replace easily..
  • Having a wide inner ring with two set screws for attaching to the shaft..
  • Widely used in various of machinery, especially in food machine..
  • Also can be used into pharmaceutical machinery, conveyering systems, film processing machinery, spin machine, printing machinery,etc..
  • Zinc-aluminum alloy housing, chrome steel insert, easy to install. Pack of 4 Antrader Flange Bearings..
Check Stock

StickerTalk B.I.B.L.E Bible Vinyl Sticker 10 inches by 3 inches

  • Gothic quik-align letters are durable and self-aligning to provide a clean, professional appearance.
  • Our gothic quik-align letters are made of pressure sensitive, matte finish B-933 vinyl, pigmented throughout for durability and fade resistance.
  • Industrial grade material resists temperature extremes, abrasion and common solvents and aggressive adhesive holds for years both indoors and outdoors....
  • The self-spacing, self-aligning diecut characters interlock to ensure perfect spacing for professional looking signs every time.
  • Keep your quik-align kits current by refilling them with ten pack replacements.
Check Stock

Magliner NPK122G2C5C Aluminum Paddle Brake Hand Truck, U Frame Extension, Loop Handle, Foam Filled 10\ Wheels, 60\ Height x 21-/2\ Wide x 20-1/2\ Depth, 500 lb. Load Capacity

  • Paddle brake hand truck with a U frame extension, loop handle, two foam-filled 10" wheels, and a 500 lb. load capacity is suitable for moving boxes and other heavy items on inclined surfaces in wet or dry environments.
  • Made of aluminum, which weighs less than steel and is resistant to rust and corrosion.
  • Paddle brake activated by self-adjusting self-aligning steel aircraft cables for even braking and gradually slowing the speed or stopping.
  • Loop handle can be gripped in different places for comfort and convenience.
  • Wheels have one-piece steel hubs and semi-precision bearings to reduce friction and help support the load.
Check Stock

NTN Bearing 1202 Double Row Self-Aligning Radial Ball Bearing, Normal Clearance, Standard Cage, 15 mm Bore ID, 35 mm OD, 11 mm Width, Open

  • Size - Model: 1029 (Inner Diameter=9mm, Outer Diameter=26mm, Thickness=8mm).
  • Material - Rolling Balls are made of chrome steel with good surface quality, good hardness, load capacity, and wear resistance. The cage is made of nylon..
  • Features - Double row, open type. ABEC1 accuracy, normal clearance..
  • Applications - Suitable for applications such as drive shafts where the shaft and housing are difficult to center and where the shaft is prone to deflection..
  • Package Content - 2 x Self-Aligning Ball Bearings.
Check Stock

ASS SAVERS - Mudder Mini - Front Fender, 32-55MM

  • PROTECT FACE AND HEADSET BEARINGS: The Ass Savers MUDDER MINI is a quick fender to protect your face and headset bearings from dirt and spray during high speed trail rides. MUDDER MINI will not protect riders from general sprays from front tire..
  • FITS ALL CROSS/GRAVEL FORKS: The MUDDER MINI will fit all gravel/cx forks with clearance for tire widths between 32 mm up to 55 mm. It will not work on a road fork with narrow clearance or for fat bikes. The correct position is about 10 mm above the tire. Aligning the position to the tire and not the fork crown increases efficiency and is made possible by our custom hook and loop straps. Make sure that the mudguard doesn't touch your down tube when turning the handlebar..
  • EASY MOUNTING WITH INNOVATIVE STRAPS: The specially designed straps have enough friction to prevent the mudguard from sliding down on a conic fork leg. However, it needs to be tighten firmly to stay up. The open ended design of the strap will allow you to adjust the length and thereby center the position of the ASS SAVERS logo on the fork leg. You can also inverse the strap if you prefer to have a no-logo appearance..
  • PRE-FOLDING DESIGN: The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior....
Check Stock

Motorcraft MM840 New Blower Motor without Wheel

  • 【FITMENT】: the Heater Blower Motor fit for 2014-2017 for Dodge Journey /2013 for Lexus ES300h /2007-2016 for Lexus ES350 /2010-2016 for Lexus GX460 /2010-2012 for Lexus RX350 /2010-2012 for Lexus RX450h /2010-2016 for Toyota 4Runner /2005-2015 for Toyota Avalon /2007-2017 for Toyota Camry /2008-2016 for Toyota Highlander /2007-2016 for Toyota Tundra /2010-2015 for Toyota Venza.
  • 【ADVANTAGE OF THE MOTOR】: Wind power strong and No noise. Adopt new technology and excellent production equipment to make products more environmentally friendly and energy-saving..
  • 【FEATURE OF THE MOTOR】: Permanently lubricated self-aligning bearings with long design life and reliable performance. This high quality blower motor is a new aftermarket replacement part built on the most stringent quality control standards..
  • 【PREFERRED MATERIAL】: Superior materials which provide maximum strength and durability. Material of rotor punching plate is silicon steel sheet. Enameled wire is used copper enameled wire..
  • 【PACKAGE INCLUDED】: 1pc aftermarket fan motor and fan cage with 1 Year WANRRTY. Please double-check the parts search above to make sure it fits your vehicle..
Check Stock

Spitfire Classic Skateboard Bearings One Size Blue

  • BUILT IN FOR EASY INSTALLATION - Fireball Dragon Built In Bearings are designed for quick and simple installation on your skateboard or longboard, with reduced slop (bearing movement) and perfect alignment, eliminating the need for separate spacers and skateboard washers.
  • INCREASE YOUR PERFORMANCE - Dragon Bearings come with our signature Labyrinth Shield to keep dirt and debris out while offering maximum lubricant retention! See image for more info.
  • PRE-LUBRICATED FOR LONGEVITY - with our Dragon ENDURE grease for maximum longevity and all weather use. These bearings are built to perform day in, day out.
  • LIFETIME BEAST GUARANTEE - for peace of mind against manufacturing defects for the life of your bearing.
  • SET OF 8 608 BEARINGS - 1 Set is enough for 4 skateboard or longboard wheels. Specs - 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle) with built-in spacer measurements of 5.1mm and a 0.65mm speed ring..
Check Stock

Ass Savers Mudder Mini Detour Clip-On Gravel Mudguard (Black)

  • PROTECT FACE AND HEADSET BEARINGS: The Ass Savers MUDDER MINI is a quick fender to protect your face and headset bearings from dirt and spray during high speed trail rides. MUDDER MINI will not protect riders from general sprays from front tire..
  • FITS ALL CROSS/GRAVEL FORKS: The MUDDER MINI will fit all gravel/cx forks with clearance for tire widths between 32 mm up to 55 mm. It will not work on a road fork with narrow clearance or for fat bikes. The correct position is about 10 mm above the tire. Aligning the position to the tire and not the fork crown increases efficiency and is made possible by our custom hook and loop straps. Make sure that the mudguard doesn't touch your down tube when turning the handlebar..
  • EASY MOUNTING WITH INNOVATIVE STRAPS: The specially designed straps have enough friction to prevent the mudguard from sliding down on a conic fork leg. However, it needs to be tighten firmly to stay up. The open ended design of the strap will allow you to adjust the length and thereby center the position of the ASS SAVERS logo on the fork leg. You can also inverse the strap if you prefer to have a no-logo appearance..
  • PRE-FOLDING DESIGN: The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior....
Check Stock

BESTOOL Gimbal Bearing Puller | Mercruiser Alignment Tool | OMC Heavy Duty Bearing Puller for OMC/Mercruiser Alpha/Alpha one/Bravo

  • STURDY & DURABLE:This puller alignment tool is made of solid pieces of steel. It can be a lifetime tool that will last longer..
  • WEAR PREVENTION:This gimbal bearing tool supports proper alignment that prevents wear on the bearing, drive, and coupler..
  • ALIGNMENT CHECK:Our bearing installer puller can be used to check engine coupler alignment with the gimbal bearing and drive..
  • EASY TO USE:After assembling, the seal bellow expander tool works just as well as the one-piece tools, which can save space in this way..
  • VARIOUS APPLICATION: This GIMBAL bearing puller tool will remove bearings on Mercruisers, OMC, and Cobra Bell Housings..
Check Stock

Johnson Level & Tool 40-6200 Magnetic Sheave Alignment Laser, Red, 1 Laser

  • DECREASED VIBRATION: This Johnson Magnetic Sheave Laser is designed to offer a high accuracy level ranging from +/- 1/6 in. to 10 ft. It is made to decrease vibrations on pulleys and sheave systems, helping minimize wear on belts and motor bearings..
  • SECURE FITTING: The alignment level tool features rare earth magnets that ensure a secure attachment to ferrous metals, allowing quicker and safer set up. The strong magnets offer accurate alignment for reduced noise and abrasion..
  • COMPACT SIZE: Featuring three laser targets, the magnetic aligning tool easily adjusts to various width sheaves for versatility. The compact size of the tool also makes it easy to use on sheaves with a small diameter..
  • APPLICATION: This sheave laser has a red laser wavelength of 635nm+/-10nm to quickly check height and flatness of gear box and motor mounting plates. It is also suitable for various alignment jobs on sprockets, rollers and other plant equipment..
  • PRODUCT SPECIFICATIONS: This Red Sheave Alignment Kit is powered by 2 "AAA" alkaline batteries (included) and has a battery life of up to 10 hours. It comes packed in a hard case for protection and easy carrying..
Check Stock