Boston Gear LHSSE8 Self-Aligning Ball Bearing, Spherical, Precision, 0.500\ Bore, Stainless Steel

  • Self-aligning, self-lubricating bearing for applications using linkages for accommodating misalignment under heavy radial or thrust loads.
  • Heat-treated SAE 52100 steel-plated balls for resistance to corrosion and wear.
  • 410 stainless steel housing for resistance to corrosion.
  • Self-lubricating PTFE liner and lubrication groove on OD for durability and efficiency.
  • Maximum static radial load of 13,600 lbs.
Check Stock

General Motors 12643668, Engine Crankshaft Thrust Washer

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

UCT202-010T NTN New Ball Bearing Take Up

  • Take-up block with spherical roller bearing insert for use with a Rexnord center pull frame.
  • Cast-iron housing and self-aligning steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing take-up block for maximum strength and rigidity.
  • Fixed-type bearing with a single setscrew locking collar for secure attachment to a cylindrical shaft.
  • Metal clearance seal for no speed or temperature limitations, and no frictional drag.
Check Stock

Boston Gear LHB12 Self-Aligning Ball Bearing, Spherical, Precision, 0.750\ Bore, Aluminum Bronze

  • Self-aligning bearing for applications using linkages for accommodating misalignment under heavy radial or thrust loads.
  • Heat-treated SAE 52100 steel-plated balls for resistance to corrosion and wear.
  • Aluminum bronze housing for resistance to corrosion.
  • Lubrication groove on OD for durability and efficiency.
  • Maximum static radial load of 30,000 lbs.
Check Stock

Clevite TW-678S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite TW-473S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Steelbody 7 feet 45 lb. Olympic Weight Bar with Machined Bar Sleeves – Black – STB-75

  • PREMIUM QUALITY MATERIAL – Made from heavy-duty commercial-grade solid steel for heavy-duty durability. This bar won’t warp or bend even when used with heavy weights!.
  • TOUGH CONSTRUCTION – This weight bar can hold up to 1,500 lbs. Perfect for bench presses, squats, deadlifts, and other Olympic weight exercises..
  • TEXTURED GRIP – Features an ultra-precision machine-knurled grip. This allows for a solid hold on the bar even when it’s wet..
  • PRECISION THRUST BEARINGS – The bar sleeve contains precise thrust bearings to reduce the friction between weight plates and the bar by providing a free rotation which offers a better workout experience..
  • IWF STANDARD – Specially designed to meet IWF (International Weightlifting Federation) standards. Ideal for use in weightlifting competitions..
Check Stock

Rannb 51202 Thrust Ball Bearing Axial Ball Thrust Ball Bearings 12mm x 32mm x 15mm - Pack of 3

  • 【Material】The 51202 Thrust Ball Bearing is made of Chromium Steel (GCr15),durability and resistance to deformity under loads..
  • 【Dimension】Bore Diameter : 15mm/0.59".
  • 【Application】Designed for low speed operation and axial loads only..
  • 【Easy to Use】The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections..
  • 【Package Content】3pcs x 51202 Thrust Ball Bearing.
Check Stock

MRC R4AFF Small Ball Bearing, Double Shielded, No Snap Ring, Inch, 1/4\ ID, 3/4\ OD, 27000 rpm Max RPM, 261 pounds Static Load Capacity, 632 pounds Dynamic Load Capacity

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

10 Sets Thrust Needle Roller Bearings with Washers 0.75 Inch Bore 1.25 Inch OD Industrial Bearing with Nice Load Carrying Capacity and Stiffness NTA1220 2TRA Thrust Needle Roller Bearing

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

Electric Spine Massager Adjusting Corrector Gun, Spine Chiropractic Correction Tool for Lower Cervical Spine Thoracic Lumbar with 4 Massage Heads (White)

  • The CAT EX Chiropractic Adjusting Tool - thrust adjustment device for physicians.
  • Designed for greater reliability and increased durability and offers greater thrust than traditional adjusting tools.
  • CAT EX is a high thrust device with a maximum rated output of 52 pounds of force.
  • Perfect solution for clinicians trained in and performing Sacro Occipital Technique (SOT) adjusting.
  • Chiropractic alignment tool features precision components and sleek design for smoother, easier operation..
Check Stock

Allstar ALL90055 Roller Bearing Style Camshaft Thrust Button for Big Block Chevy Timing Cover

  • Camshaft thrust button fits big block Chevy engines.
  • Machining of the cam sprocket may be required.
  • Cam buttons limit lateral movement of the camshaft in engines without cam thrust plates, and reduce friction for free horsepower.
  • Manufactured from quality steel material and high quality roller needle bearings.
Check Stock

PULSAR 6.6 Duramax LLY Turbo Rebuild Kit Billet Compressor Wheel 2004.5-2005

  • 5 Axis CNC milled, machined from Solid, make more aggressive blades design possible,Spool up faster, Lower EGTs and More Boost!.
  • 360º thrust bearing vs. stock 270º thrust bearing enhances turbochargers durability..
  • Fits 2004.5-2005 Chevy/GM 6.6L Duramax LLY Garrett GT3788VA Turbo ONLY.
  • BE AWARE this compressor wheel doesn't fit LB7 LBZ turbos.
Check Stock