Categories

Best Self clinching Standoff

Aexit M10 Zinc Power Fastening Tool Parts & Accessories Plated Self Clinching Rivet Nut Fastener 10pcs for 1mm Nailer Replacement Parts Thin Plates

  • Package Content: 10pcs x Self Clinching Nut.
  • Overall Size: 17x9mm/0.67"x0.35"(Max.OD*H).
Check Stock

(5000 pcs) 1/4\-28 X 3/4\

  • Self clinching studs are designed to become permanent fixtures of the parts they are installed onto..
  • Forcing the clinching ring into softer material causes it to deform and lock into the shank..
  • Pressed into a drilled or punched hole with an arbor press or a similar pressure tool..
Check Stock

Aexit M6x10mm Zinc Power Fastening Tool Parts & Accessories Plated Flush Head Self Clinching Threaded Studs Nailer Replacement Parts Fastener 50pcs

  • Package Content: 50(+/-2%)pcs x Self Clinching Studs.
  • Thread Size: (Approx)M6x8mm/0.24"x0.3"(D*L).
  • Head Size: (Approx)8x2mm/0.3"x0.08"(D*T).
Check Stock

(6000pcs) 1/4-20X5/8 Flush Head Self-Clinching Studs Steel, Zinc Plated

  • Self clinching studs are designed to become permanent fixtures of the parts they are installed onto..
  • Forcing the clinching ring into softer material causes it to deform and lock into the shank..
  • Pressed into a drilled or punched hole with an arbor press or a similar pressure tool..
Check Stock

100pcs Steel Self Clinching Studs (TSC6) 0.206X#6-32X0.3125

  • Self clinching studs are designed to become permanent fixtures of the parts they are installed onto..
  • Forcing the clinching ring into softer material causes it to deform and lock into the shank..
  • Pressed into a drilled or punched hole with an arbor press or a similar pressure tool..
  • Stainless steel significantly improves resistance to tarnishing or corrosion..
Check Stock

WeldingStop Standoff Guide 9-8281 for Thermal Dynamic Cutmaster 38/52/82/102/152 Plasma Cutter SL60 SL100 Torch Consumables

  • The Standoff Guide 9-8281 used for Drag cutting.
  • the Standoff Guide 9-8281 need work with shield cap 9-8218.
  • The Plasma Standoff Guide can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Standoff Guide can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • The standoff guide are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

Csdtylh 320Pcs M3 Motherboard Standoffs&Screws&Nuts Kit Hex Male-Female Brass Spacer Standoffs Laptop Screws for DIY Computer Build Electronic Projects Raspberry Pi Circuit Board etc.

  • 【HIGH QUALITY】Packaged included 320pcs M3 motherboard standoffs and screws. The M3 standoff kit is very good value, which has a wide selection of standoffs and connectors.The M3 laptop screws kit has nice brass finish with quality threads.The motherboard standoffs fit nicely, thread cleanly and the variety in this m3 standoff kit is more than enough for all of the components in your DIY build..
  • 【GOOD ASSORTMENT】The M3 standoff kit is a very nice assortment of brass standoffs and all neatly organized in a compartment box. All the threads in the M3 computer screws kit are correctly sized, clean, and burr free.The m3 standoff kit box holding all the motherboard screws pieces is a good bonus to keep all motherboard standoffs organized in their own compartment..
  • 【EASY TO USE】The M3 standoff kit is a great kit with a lot of options. The M3 standoff kit are simple to work with, yet usable. The M3 motherboard standoffs and screws kit is easy to adjust the selected step or rise. The motherboard standoffs are easy to install and durable to use, too..
  • 【MUTIPURPOSE】 The motherboard standoffs kits are versatile. If you are a DIY computer builder, a little M3 standoff kit box of these motherboard standoffs and screws is essential. The motherboard scre....
Check Stock

WeldingStop 9-0090 Standoff Guide for Thermal Dynamics Consumables SL40 Plasma Torch Consumables Cutmaster 42/12+ Plasma Cutter 1pc

  • Plasma consumable type: SL40 plasma standoff guide.
  • Plasma Standoff Guide Model Number: 9-0090.
  • The SL40 plasma standoff guide can fit Thermal Dynamics Cutmaster 42 ( 1-5130-1, 1-5130-2, 1-5131-1, 1-5131-2) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0090 standoff guide can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The 9-0090 standoff guide are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

20 Pcs M3 Aluminum Standoff Column Spacer for RC Multirotors (20mm, Black)

  • ★ 240 Pieces brass standoff kit: the brass standoff kit come with screws, nut, standoff, applies to many area, appropriate to meet you different needs..
  • ★ Durable material and long use life: All standoffs are made of durable brass, which strong, anticorrosive, compact and portable..
  • ★ Size: M2.5 Brass female to female length is 6 mm, 10 mm, 15 mm, 20 mm.
  • The screw thread is M2.5/ (2.5 mm), the thread pitch is 0.5 mm.
  • ★ Easy to install: the standoff kit is very useful small tools, they are very easy to install, and bring a lot of convenience to your life.
  • ★ Package includes: 240 pieces M2.5 standoff kit, the plastic box is durable in any way..
Check Stock

Electronics-Salon Black Nylon Round Spacer Assortment Kit, for M3 Screws, Plastic.

  • Nice combination: you will receive 8 stainless steel standoff screws sets, including 8 standoff screws, 8 screws, 8 Expansion screws, nice combination and sufficient quantity can meet your demands and replacements.
  • Appropriate size: the size of this advertising standoff mount is approx. 1/2 x 3/4 inch, proper size is easy to use and will bring you a satisfactory using experience, please confirm the size before purchasing.
  • Reliable to use: the metal standoff hardware is made of stainless steel, which ensures strength and lightweight on the basis of lightweight and easy to use, rustproof, scratch-proof and corrosion-resistant, support for you to use for long-lasting usage.
  • Wide range of application: these wall sign mounting hardware are good choice for company, office, store, shops, bedroom, such as glass sign, acrylic sign, acrylic plate, acrylic picture frame indoor and outdoor advertising boards, photo.
  • Easy to install: install the plastic expansion tube into the wall and fix the standoff screw with screw, the contact surface between the screw and the product is protected by rubber.
  • Please note that screws require a screwdriver to assist the mounting of the standoff screw.
Check Stock

E3-8-ST Steel Tubular Rivet, 3/16\ Diameter X 1/4\ Length, Oval Head (.375 Dia. X .060), ZINC Finish (Pack of 100)

  • Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched..
  • Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole.
  • Rivets can also be used with a rivet cap to improve appearance of clinched end..
  • Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward..
Check Stock

Pelopy Sign Standoff Screws Advertising Screws Stainless Steel Wall Standoff Mounts Glass Acrylic Nail 8 Pieces 1 x 1 Inch

  • Standoff screws: the screws size is about 25 x 25 mm/ 1 x 1 inch (Diameter x Length), screw thread length is about 3/ 4 inch (19 mm), please confirm the size before purchasing.
  • Durable: the standoff nail is made of stainless steel, which ensures strength and lightweight on the basis of lightweight and easy to use, rustproof, scratch-proof and corrosion-resistant, support for you to use for long-lasting usage.
  • Easy to install: install the plastic expansion tube into the wall and fix the standoff screw with screw, the contact surface between the screw and the product is protected by rubber pad.
  • Warm notice: screws require a screwdriver to assist the mounting of the standoff nails.
  • Rang of use: the wall standoffs screws are good choice for company, office, supermarkets, store, shops, markets, bedroom, such as glass sign, acrylic sign, acrylic plate, acrylic picture frame indoor and outdoor advertising boards, photo.
  • Quantity: package includes 8 pieces of 1 x 1 inch sign holder standoff screws, 8 pieces screws and 8 pieces wall anchors, each standoff screw has 2 pieces rubber cushion to protect your signs.
Check Stock

Litorange 240 Pieces M2.5 Male Female Hex Brass Spacer Standoff Screw Nut Threaded Pillar PCB Motherboard Assortment Kit

  • ★ 240 Pieces brass standoff kit: the brass standoff kit come with screws, nut, standoff, applies to many area, appropriate to meet you different needs..
  • ★ Durable material and long use life: All standoffs are made of durable brass, which strong, anticorrosive, compact and portable..
  • ★ Size: M2.5 Brass female to female length is 6 mm, 10 mm, 15 mm, 20 mm.
  • The screw thread is M2.5/ (2.5 mm), the thread pitch is 0.5 mm.
  • ★ Easy to install: the standoff kit is very useful small tools, they are very easy to install, and bring a lot of convenience to your life.
  • ★ Package includes: 240 pieces M2.5 standoff kit, the plastic box is durable in any way..
Check Stock