Categories

Best Sensor Cable

HiLetgo MEGA2560 ATmega2560-16AU Sensor Shield Sensor Expansion Board V2.0 with Bluetooth SD Card APC220 Wireless RF Ultrasonic Sensor Communication Interface

  • This MEGA Sensor Shield V2.0 dedicated sensor expansion board assembly market a variety of advantages in one of the expansion board design, PCB Immersion Gold processing technology..
  • Board not only all digital and analog interface to the steering gear line order form extended out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 wireless RF module communication interface, and RB URF v1.1 ultrasonic sensor interface, independent expansion a more easy and convenient..
  • For beginners, do not have to worry about cumbersome and complex circuit connection, will simplify this circuit sensor expansion board in the true sense, it can often be easily connected with the sensor..
  • A sensor requires only a general 3P sensor cable (regardless of digital cable and analog cable), complete the circuit connection, the preparation of the corresponding program downloaded to MEGA controller reads the sensor data, or receive wireless module back pass data through the arithmetic processing, the final easy to complete your own interactive works..
  • Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers..
Check Stock

OEM TE Connectivity/Corcom Brand F6946, Cable Assembly Cord Set 2.29m 3 POS Power to 3 POS Power M-F (1 Items)

  • Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks... but what if we could take the buttons, levers and joysticks out of the equation and control it with our muscles?.
  • The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin..
  • By inserting the pin to its housing and placing a sensor pad into the electrode snap, you can stick the reference cable to a separate section of the body such as a bony portion of the elbow or a nonadjacent muscle near the targeted muscle where the built-in reference pin is unable to reach..
  • Note: Reference cable only. A MyoWare 2.0 Muscle Sensor board will need to be purchased separately..
  • One end of the MyoWare 2.0 Reference Cable has a crimped pin with a tab. This is meant to be inserted into its respective pin housing on the MyoWare 2.0 Muscle Sensor. The tab will lock the pin in place. The other end has a snap pin to connect to a sensor pad. The cable is about 3 inches long..
Check Stock

Fluke FLUKE-805/ES External Vibration Sensor with 90 Degree Head High-Power Magnet Rugged Mil-Spec Connector and 7 Coiled Cable.

  • Low-profile 90-degree sensor body allows the sensor to get into tight spots.
  • Rugged, coiled cable minimizes dangling, while stretching to more than 7Ft when needed.
  • Powerful "U" shaped magnet mount creates a firm connection to flat, or curved measurement surfaces.
  • Rugged, sealed cable Connector with strain Relief tail reduces cable wear .
  • Removable sensor magnet to allow for direct attachment to a sensor mounting pad, or Threaded Hole on a piece of equipment.
Check Stock

AcuRite Wind Sensor Extension Atlas Weather Station White

  • Upgrades your AcuRite Atlas Weather Sensor for optimal placement of the anemometer and wind vane for the most accurate readings.
  • Includes 30 feet of cable to extend wind sensors higher up a pole than the body of the weather sensor.
  • Easy setup - included cable connects directly into your sensor.
Check Stock

NPET Cat Fountain PIR Motion Sensor Switch for Pet Fountain

  • 【Sensor】 NPET External Sensor for Water Fountain for Cat and Dog. Range of detection: approximately 3 m. Induction angle: cone angle of 180°..
  • 【Optional Function】 Combined with the infrared sensor module, it detects that an object is approaching or moving, and the water dispenser will....
  • 【High stability】About 3m detection distance. Extended time range: 15s-5min, adjustable stop time. The default setting is to stop working after the....
  • 【Small size and easy to install】 Accessories include screws and a sticker. You can choose the appropriate installation method according to your....
  • 【USB socket】 USB jack wiring method for easy connection. 1.2m input cable, and 0.3m output cable.The total cable length is 1.5m..
Check Stock

Innovate Motorsports 3884 LC-2 Lambda Oxygen Controller Kit Cable 3 ft Sensor Cable

  • LC-2: Complete Lambda Cable Kit (3 ft.). Includes: LC-2 Controller, LSU4.9 Wideband O2 Sensor, 3 Ft. Sensor Cable (Overall length 5 ft.), 1"....
  • Ability to calibrate O2 sensor for maximum accuracy.
  • Integrated dual-color status LED (Green/Red).
  • Two configurable linear 0-5v analog outputs.
  • Wideband O Compatible with ALL fuel types.
Check Stock

Fpxnb 2 Pcs Replacement Motion Sensor Bars for Wii & WiiU Game Console, Wired Infrared IR Ray Sensors (Pack of 2)

  • EXTRA-LONG CABLES: We provide a 7.2ft Cable for the sensor to ensure that it is long enough to reach out your console.
  • SENSITIVE AS THE ORIGINAL: Not only looks like the original sensor bar, but also works great as the originals.
  • COMPATIBLE WITH WII & WIIU: Wired Infrared Sensor Bars, perfect for Wii and Wii U consoles.
  • EASY TO SET UP: Take the sensor bar out of the box, place it on your TV, and plug the cable in your console and there you go.
  • 2 PACK WITH GREAT CUSTOMER SUPPORT: Each set has 2 Sensor Bars in 9.4 inches and 2 Stands with adhesive for you to set up the sensors. Great Customer Service. No need to worry about the quality.
Check Stock

Sensor Bar for Wii/Wii U Console by QAQBOYS Wired Infrared IR Signal Ray Sensor Replacement IR Ray Motion Sensor Bar Include a Stable Stand

  • 【Quick Easy Install】 Take the sensor bar out of the box, place it on your TV, and plug the cable in your console and there you go..
  • 【Comes with a stand】The motion sensor comes complete with a clear stand. It with adhesive for easy attachment to TV, monitor or any smooth surface without worrying about over stretching the cable..
  • 【Professional Customization】 Wired infrared sensor bar compatible with Wii and Wii U consoles, motion plus controllers and other Wii controller addons..
  • 【Extra Long Cables】 We provide a 7.2ft Cable for the sensor to ensure that it is long enough to reach out your console..
  • 【Attentive service】 If you have any questions when purchasing and using this item, you can always consult us, we provide 24 hours a day, 7 days a week..
Check Stock

Stemedu 5PCS RCWL-0516 Motion Detection Sensor, Microwave Radar Sensor Switch Module for Ar duino ESP8266 Nodemcu Wemos for Animals Detector, Detection Distance 5-7m, Better Than HC-SR501

  • Material: The surface of Weibo sensor is made of flame-retardant frosted plastic shell, which is resistant to high temperature, impact, stability and interference..
  • Connecting cable: It is made of high-quality radar special connecting wire material and made of PVC pentoxide raw material, which brings you great security..
  • Sensor: It adopts a new generation of portable four-core plug-and-play connector. The fixed module base adopts an adjustable sensing direction scheme. When the sensor detects an object, the indicator light can be accurately illuminated at the output end..
  • Scope of application: It is widely used in some public places, such as automatic doors, elevators, such as supermarkets, ATMs, airports, etc..
  • Installation method: Put the sensor device in the proper position, please completely clear the residue when processing the cable hole. After opening the hole, uncover the mounting plate and fix the signal cable on the automatic door. Fix it with screws and connect the sensor to the power supply. use..
Check Stock

Hydor Smart Level Auto Top Off System with Pico Pump 70 GPH 1.6 LB

  • Smart Level easily and safely manages the water level of aquariums and sump due to evaporation.
  • Versitile ATO System (auto top off)! Can be used for any size auarium or sump.
  • Dual Alarm with Light and Sound to alert any malfunctioning.
  • The sensor is insensitive to surface movements of the water.
  • Magnet-suction cup support mount for sensor ensure proper positioning. Adhesive cable clip included to manage 6.5 foot long sensor cable.
Check Stock

Vividia VQ-3910 Handheld 3.9mm (0.15\) Diameter 2.4\ LCD Screen Borescope Inspection Camera

  • Image Sensor: 300000 Color CMOS sensor. Monitor: 2.4″ full color LCD (Resolution: 320×240)..
  • Focal Range: 30~80mm. Horizontal Viewing Angle: 60°. Easy to use, lightweight, handhold design..
  • Waterproof camera head & cable meet IP67 standard (the monitor is NOT waterproof). Illumination: 4 white LED lights with adjustable brightness..
  • Can add extensions to the unit for a longer cable. Powered by 4x AA batteries..
  • Semi-flexible cable length: 100cm (3.3ft).
  • Flexible cable and camera head outer diameter: 3.9mm . 4 LED lamps brightness can be adjusted..
Check Stock

Replacement-Charging-Charger-Rechargeable-Massagers DC Cable USB Cord - 2.5mm 2 Pack

  • In The Box: 1*USB Single-Port Wall Charger and 1*5 Foot Micro USB Cable..
  • Compatible devices: simple human 8" Round Sensor Makeup Mirror, 5" Round Sensor Makeup Mirror..
  • Parameters: USB single port, input AC 100-240V~50/60Hz 0.3A, output DC 5V/2A, maximum 10W, with multiple protections for overcurrent, overcharge,....
  • Rugged and Durable: Micro USB cable is made of environmentally friendly flame retardant PCV material on the outside, which makes the cable have....
  • Applicable Scenarios: The 5ft/1.5m Micro USB cable is ideal for home, office, and travel..
Check Stock

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet

  • IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
  • Blue LED in IR Receiver bulb verifies the signal transmission.
  • Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
  • Route the infrared remote control extender cable out of sight with a wall mounted TV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • Simple installation of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
  • Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
  • 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.
Check Stock