Categories

Best Sensor Compatibility

Furnace Flame Sensor Replacement for Goodman 0130F00010 B11726-06 1 Pack

  • Compatible: the charming furnace heating sensor designed for gas HVAC systems, total length of the flame sensor is 3.7 inch.
  • Function: the furnace flame sensor is safely designed to detect flame, if the sensor does not detect flame, it shuts the gas valve off, preventing raw....
  • Easy to install: great replacement for Goodman furnace manufacturing 0130F00010 sensor, keep your home warm and comfortable.
  • Usage: when your flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety, replace the old....
  • Note: please check the compatibility with your previous part and appliance's model before ordering this replacement part.
Check Stock

Furnace Flame Sensor Replacement for Goodman 0130F00010 B11726-06 4 Pack

  • Compatible: the charming furnace heating sensor designed for gas HVAC systems, total length of the flame sensor is 3.7 inch.
  • Function: the furnace flame sensor is safely designed to detect flame, if the sensor does not detect flame, it shuts the gas valve off, preventing raw....
  • Easy to install: great replacement for Goodman furnace manufacturing 0130F00010 sensor, keep your home warm and comfortable.
  • Usage: when your flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety, replace the old....
  • Note: please check the compatibility with your previous part and appliance's model before ordering this replacement part.
Check Stock

Liantinxu 234-4797 O2 Oxygen Sensor Downstream Replacement for Accord 2.4L 2003 2004 2005 2006 2007

  • Note:Please check your vehicle compatibility,the reference number, size and position are correct.especially the plug interface part..
  • Fit Vehicles:Replacement for Accord 2.4L 2003 2004 2005 2006 2007..
  • Advantage: Liantinxu Oxygen Sensor features stainless steel housing,double protection layer, aluminum oxide trap layer, ptfe filter and precoated....
  • Installation: Direct replacement with OE parts, easy replacement, fast..
  • Location: Bank 1 Sensor 1=Upstream Right/Rear.
Check Stock

Zooz 700 Series Z-Wave Plus Temperature | Humidity XS Sensor ZSE44. Hub Required (Sold Separately). Compatible with SmartThings, Hubitat, and Home Assistant (Z-Wave JS).

  • TEMPERATURE SENSOR: Monitor air temperature in every room to get the most of your smart thermostat (sold separately). Make your home more comfortable with precise data sent by this smart sensor. Z-Wave hub required (sold separately, scroll down for compatibility)..
  • HUMIDITY SENSOR: Increase the air quality of your bedroom or home office with humidity level reports you can use to trigger your smart humidifier (sold separately). Stay in full control of the environment you spend the most time in..
  • DISCREET & SECURE: Enjoy the minimal design of this device and extra small size that will help it blend into any interior. It comes with the 700 series Z-Wave chip offering longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication..
  • OUTDOOR BRACKET AVAILABLE: The sensor is coated with rubber oil protecting it against corrosion and water leak damage. You can mount the sensor outdoors under eve (no direct sunlight or rainfall) with the recommended mounting bracket (sold separately, ask Zooz about it)..
Check Stock

Watts Premier WP367010 Sensor Valve for Watts Hot Water Recirculating Pump (0955800), Plain

  • SPECIFICATIONS: 1/2 inch MPT connections on the Sensor Valve.
  • COMPATIBILITY: The WP367010 Sensor Valve is only for use with Watts Instant Hot Water Recirculating System. It is not designed to be used with a dedicated return line to the water heater.
  • EASY INSTALLATION: Easy to install with no additional pumps needed. Additional sensor valve for branched hot water lines.
Check Stock

ismartgate Wireless Waterproof tilt Sensor. Compatible with sectional and tilt Garage Doors. Requires ismartgate hub.

  • STATUS, TEMPERATURE AND BATTERY ALERTS: The ismartgate waterproof wireless sensor will monitor the status of your sectional or tilt garage door as well as outside temperature and battery condition. Receive real time alerts on phone or via email through ismartgate access, homekit or google home app..
  • COMPATIBILITY: wireless sensor compatible only with ismartgate PRO and ismartgate LITE universal Wi-Fi garage controllers. Not stand-alone..
  • WIRELESS SENSOR: easy to install since no cables are required! Simply put provided batteries inside sensor, place and stick sensor on the top panel of your garage door and through ismartgate access app link sensor to your ismartgate Wi-Fi controller. 30ft (10m) wireless range..
  • WATERPROOF: The ismartgate wireless tilt sensor is waterproof, so it can also be used in garages with some exposure to weather..
  • NO INTERFERENCE: this sensor works at a 2.4Ghz frequency range, which is different than frequency used by remote controls or LED lights..
Check Stock

Blast Motion Replacement Wireless Sensor Charger | for use Golf, Baseball & Softball Sensors (900-00052)

  • COMPATIBILITY: This replacement charger is compatible with all Blast Motion Sensors (Not Included)..
  • HOW TO USE: To start the charging process connect the black Wireless Charger and the cable connection. Once the cable is connected to the Wireless Charger and the blast logo is facing up, the charging process can begin..
  • EASY TO USE: When the sensor is placed on the charger an audio tone will sound. There are 3 indicator lights on the charger:.
  • LED LIGHT INDICATORS: Red LED – The charger is not active (the sensor is not on charger or the sensor is fully charged). Blue LED – The sensor is charging. Green LED – The sensor is completely charged..
  • CHARGING TIME: A full charge takes 60 min. Once the sensor is charged you can see the battery level on the top right of the app. When the sensor is showing less than 20% battery level or the sensor LED starts to blink red, a charge is needed.
  • PACKAGE CONTAINS: Wireless Charger, 1m Micro USB Cable..
  • Included components: wireless charger, micro USB charging cable.
Check Stock

Air Fuel Ratio Upstream O2 Oxygen Sensor 234-9040 Replacement for 2003-2007 Honda Accord 2.4L

  • 【ments】Interchange Part Number:234-9040Position: Upstream Oxygen Sensor Oxygen Sensor Replacement for Honda Accord and Replacement for more vehicle vehicle model (Please match your vehicle model at the left top) ".
  • 【Specsification】 Length (Sensor to Lead)：440mm (17.32 inch) Wires: 4,Oxygen Sensor - Detect oxygen content in the exhaust gases to optimize emissions, improve engine performance and fuel efficiency ,Direct plug-in replacement, easily to install.
  • 【Safety】Constructed from durable material that is corrosion and abrasion resistant, ensures long-time work stably under high temperature and extensively tested during manufacturing to product quality and reliability.
  • 【Notes】 To avoid you buying the wrong item, please check the description and compatibility chart carefully before your purchasing.
Check Stock

Replacement RTD Temperature Sensor Probe Compatible with Louisiana Pellet Grill& Country Smoker Grills Replace Part 50151

  • COMPATIBILITY - Temperature sensor replacement for Louisiana Grill Series& Country Smoker Series (TIP: Please check spade connector style).
  • REPLACE OEM PART - Smoker tempe sensor replace original accessories 50151, comes with 1pc screw and nut..
  • GRILL THERMAL SENSOR SIZE - 2" Internal Grill Sensor, 36" stainless steel wire allows use with the control board..
  • USEFUL TIPS - To avoid temp probe damaged, do not place probe in water, wires rolled up in a large, loose coil during storage..
  • FRIENDLY SERVICE - If you have any questions, please contact us through Amazon Messenger..
Check Stock

HomeSeer HS-DS100+ Z-Wave Plus Door/Window Sensor

  • 3 in 1 Zwave Sensor: Door and window sensor, temperature sensor and humidity sensor 3 in 1. Protect your home by detecting accidental opening/closing of doors, windows, cabinets and drawers. Check the battery level of the device, temperature and humidity through the app..
  • Safe and Reliable: Built-in Z-Wave 700 series, Z-Wave Plus V2, faster wireless speed, longer battery life and longer range than Z-Wave 500 series. SmartStart included, with standard S2 security features, is not only easy to install (auto-recognition via a quick scan of a QR code), but also secure..
  • Long-Life Battery: This smart sensor is powered by a CR2450 battery (battery included, no need to bring your own). The lifespan is 3 years. The sensor’s power saving mode extends battery life compared to other sensors..
  • Customized Events: Personalize how your Z-Wave devices talk to each other: when the front door is opened in the evening, automatically turn on the welcome lights. When a backdoor is opened unexpectedly, trigger a Z-Wave alarm siren..
  • Z-Wave Hub Compatibility: This z-wave door sensor works with certified Z-Wave gateways, Fibaro, SmartThings, Vera..
Check Stock

Polar Unisex Adults' M460 Integrated GPS Altitude Tracker with Heart Rate Monitor, Black, One Size

  • Integrated GPS, barometer & GPS based gradient and heart rate via chest sensor..
  • 3rd party compatible-Strava, Training Peaks & 3P Power Meters. Also features Strava Live Segments..
  • Complete Bluetooth smart sensor compatibility..
  • User selectable training views. NEW H10 sensor with improved accuracy. Includes Fitness & Orthostatic Tests..
Check Stock

EWK 22mm 7/8 Inch O2 Oxygen Sensor Flex Head Wrench Removal Tool

  • 【 Flexible Operation 】Goes into narrow space and odd angles with the unique contour handle. EWK oxygen sensor removal tool works around the exhaust and gets to places ordinary wrenches won't. Easy to remove or install the hard-to-reach and stuck O2 sensors..
  • 【 Extra Leverage 】Swiveled head helps create extra leverage in narrow areas. The 22mm oxygen sensor wrench helps getting additional clearance during the job. Effortlessly turns the removal job into a breeze..
  • 【 Slotted Design 】 Get to the O2 sensor from the side to prevent damaging the wire or the sensor. Keeping the wire harness attached by getting to the sensor from the side instead of from the top..
  • 【 Great Compatibility 】EWK O2 sensor remover is designed to work on 7/8″(22mm) O2 sensors. Compatible for Ford contours, 4.6L, 5.4L Ford modular engines. Covers most vehicles on the market..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

TSL1401CL Linear Sensor 128X1 Linear CCD Camera Sensor Ultra Wide Angle Lens 120 Degree Black and White Line Tracking Module

  • BASIC SPECIFICATIONS: With sensitivity pure tones , field cut and signal output, circuit board output switch (can be directly passed through the microcontroller).
  • MULTIPLE OUTPUTS: The linear magnetic sensor switches has signal output indication, single signal output, active low signal output.
  • IDEAL CHOICE: This linear magnetic sensor switches is ideal for temperature control, proximity switches, alarm detection or rotate encoders.
  • WITH SENSITIVITY: Universal sensor module with potentiometer to adjust the sensitivity of the sensor, provides analog and digital output.
  • HIGH COMPATIBILITY: With A3141 chipset, 49E linear effect sensor, LM393 dual differential comparator, potentiometer, 2 LED and 6 resistors, fully compatible with standard microcontrollers.
Check Stock