Best Separated Cutting Machine
Atomstack A20 pro Laser Cutter and Engraver Machine by UESUIKA, 130w Diode Laser Engraving Machine with Air Assist Kits, 20W Optical Power, Easy Assembly, Eye Protection Fixed Focus Compressed Spot
- ...aser focus area to 0.08*0.1mm, which's focus spot area is 1/3 of other lasers.
- the wood laser engraver can take into account precision engraving and high-energy cutting at the same time.
- 【Easy to Install】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup is about 30 minutes.
- 【Operational Safety】The panoramic filter glass protective cover filters 97% of ultraviolet laser damage and Goggles will protect your eyes.
- the emergency stop button can be used in the event of an unexpected situation.
Check StockMOOER Groove Loop X2 ultimate Guitar Looper Pedal Stereo mono looper and drum machine combo pedal with 14 save slots, 140 minutes loops 121 Drum Grooves, Editor Software
- ...r and flexible with the ability to toggle count-in mode on/off and an automatic mode that detects and begins the looper once an instrument signal is detected..
- Easy to use with TIME STRETCH function allows users to change the speed of playback without affecting the pitch. Audio playback and drum machine audio can be separated into two different outputs.
- Groove Loop X2 packs in a huge variety of drum grooves separated by 11 different genres, each with 11 different variations that can be easily selected with the included GENRE and PATTERN knobs..
- Drum machine tempo can be set manually by Tap Tempo or when used in combination with the Looper, tempo will be automatically detected while playing..
- Groove Loop X2 edition of the Groove Loop also adds many requested features such as split stereo inputs and outputs. Looper and Drum machine can also be split to two different outputs for added flexibility.
- Audio playback and drum machine audio can be separated into two different outputs. Three different recording mode: Count-in mode. automatic mode and normal mode..
Check StockAtomstack A5 M50 pro Laser Cutter and Engraver Machine by UESUIKA, 5-5.5W Optical Power, Diode 40w Laser Engraving Machine with Independent Control Terminal, Quadruple Lens Compression Fixed Focus
- ..., anytime without the restriction of a computer..
- 【Perfectly compatible system】A5 M50 pro laser engraving machine can be compatible with LaserGRBL or LightBurn. You can also use the Atomstack APP to control it on your phone..
- 【Assembly is quite easy】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup was about 30 minutes..
- 【Quality Assurance and After - Sale Service】We have a professional customer service team. We provide the customers a year warranty , parts replacement and permanent technical support. Your concerns are answered within 24 hours. We are so confident that you will love this laser engraver..
Check StockZUZUAN Glass Cutter 2mm-20mm, Upgrade Glass Cutter Tool, Pencil Style Oil Feed Carbide Tip for Glass Cutting/Tiles/Mirror/Mosaic
- ✅【Larger Cutting Scope】Glass cutter has 3 different sizes of cutting head, suitable for the thickness of 2-6mm/6-12mm/12-20mm of all kinds of glass, mirrors, etc.
- ✅【Upgraded Cutter Head】 The cutter head is made of high quality hard alloy material, with higher hardness and sharper and smoother cutter head, ensuring neat cutting plane and smooth operation.
- ✅【Easy to Use】 Non-slip durable alloy handle, accord with human body engineering design, reduce the wrist fatigue. When the pressure is applied, the automatic oil point system keeps the wheel lubricated every time cutting, making the cutting head more smooth and sharp (no glass cutting oil is contained in the package).
- ✅【Wide Use】 Glass cutter is suitable for all types of glass, DIY, Mosaic, tile, mirror, painted glass cutting and home cutting ideal tool.
- ✅【Usage】When cutting glass, hold the glass cutter according to the pen-holding posture, the glass cutter is 45° with the cutting plane, and aim at the target with one knife gently.
- After finishing, tap the edge of the glass with the metal head of the handle along the scratches, and see cracks in the scratches. Gently break the glass to both sides with your hands, and the glass can be separated.
Check StockNutrifaster Cutter Plate For N350 And N450 Model 108
- Fiber & Juice Separated: Designed with 5-grade gear transmission for less power consumption, driven by heavy duty motor. Juice and dregs are separated....
- Improved Efficiency: 2800 RPM powerful machine. Three stainless steel rollers crushes fruits and vegetables to perfect result. 0.7" (18 mm) large....
- Convenient Cleaning: Stainless steel juicing net inside the juice extractor. 80° scientific blade tooth won't let fiber remain easily. Net can be....
- Considerate Design: Two tough buckles link machine body and lid tightly without leakage. Heavy duty base lowers center of gravity and ensures more....
- Wide Application: Commercial juice extractor, easily juices various kinds of fruits and vegetables according to your own need. Large opening allow....
Check StockCricut Variety Pack(1 StrongGrip, 1 LightGrip, 1 StandardGrip) Adhesive Cutting Mat 12
- Works with the Cricut explore machine, Cricut expression machine, and Cricut expression 2 machine.
- One 12" x 12" standard grip adhesive cutting mat, one 12" x 12" light grip adhesive cutting mat, and one 12" x 12" strong grip adhesive cutting mat.
- Recommended materials for standard grip adhesive cutting mat: cardstock, pattern paper, embossed cardstock, iron-on, and vinyl.
- Recommended materials for light grip adhesive cutting mat: printer paper, thin cardstock, vellum, construction paper, and vinyl.
- Works with the Cricut Explore machine, Cricut Expression machine, and Cricut Expression 2 machine.
- One 12" x 12" StandardGrip adhesive cutting mat, one 12" x 12" LightGrip adhesive cutting mat, and one 12" x 12" StrongGrip adhesive cutting mat.
- Recommended materials for StandardGrip adhesive cutting mat: Cardstock, Pattern paper, Embossed cardstock, Iron-on, and Vinyl.
- Recommended materials for LightGrip adhesive cutting mat: Printer paper, Thin cardstock, Vellum, Construction paper, and Vinyl.
- Recommended materials for StrongGrip adhesive cutting mat: Thick cardstock, Glitter cardstock, Magnet material, chipboard, Poster board, and Fabric with stiffenerDescriptionCRICUT CUTTING MAT 12X12 VARITY 3 PACK.
Check StockSeparatec Men s Underwear Bamboo Rayon Comfortable Breathable Dual Pouch Trunks 3 Pack M,Navy Blue/Maroon/Olive Green
- Bamboo Rayon Fabric: Made of bamboo rayon men's underwear trunks are super comfortable,highly breathable and instant moisture-wicking.
- Patented Separated Pouch Design:Keep man's intimate areas comfortably separated, no constraint,no embarrassed adjustment.Dual pouch construction....
- Breathable Window Panel: The breathable barrier can separate the pouch into the front pouch and the lower pouch. Each part of your anatomy has its own....
- Basic Underwear For You: Made from breathable fabric and built with comfortable and elastic waistband,which is a perfect choice as daily wear,simple....
- No Riding Up Construction: 2.5 inches perfect leg cutting keeps material from riding, let you experience full day hassle-free wearing.
Check StockDelta Diamond Ripper Pro 4 1/2-Inch by .375' Concrete Crack Chaser Diamond Blade, Laser-Welded, V-Shaped Cut for Concrete Repair (4.5' X .375')
- Ripper Crack Chasers deliver high cutting performance and long life at an affordable price..
- They may be used wet or dry for cutting, routing and cleaning cracks in concrete. The cracks can then be filled with epoxy..
- Use for cutting cured concrete, green concrete, masonry, stone and similar materials..
- Specs are 4-1/2" X .375" cutting width X 7/8"-5/8" Arbor. Fits most hand-held grinders and saws..
- This diamond blade is a top-quality product and has a lifetime warranty with free return shipping. If it ever breaks, warps, cracks or shows any indication of a material defect (being used for its intended purpose), or if the bond between the diamond segment and the steel core becomes separated at any time, it will be replaced free of charge!.
Check StockDelta Diamond Brick Boss 14 Inch Diamond Blade, 1\-20MM Arbor, Wet/Dry Cutting Brick, Pavers, Stone (14\)
- ...mond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stockhynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)
- Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
- Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
- 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
- CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check StockInvisible Man
- A small investment can make a huge improvement in the cutting performance of your machine.
- Getting the best cutting performance from your Prestige Pro machine can be as simple as changing the PR standard cutting pad.
- This PR Standard Cutting Pad measures 9 7/8" x 18"..
- The many significant advantages of the extended length of this PVC vinyl Cutting Pad are an increased work surface, the ability to shuttle multiple dies through the machine for quicker cutting and for easy registration of ClearCrop Dies..
- Cutting pads need replacement generally after 4-6 months.
Check StockWananfu Pre-Separated Empty Capsules 00 Vegetarian, 1000 Count in Resealable Bags, Compatible with Capsule Filling Machine 00
- TIME AND MONEY SAVING - Our pre-separated gelatin capsules 00 set you free from hassle of opening up every single capsule. That saves you 40 minutes for making every 1000 capsules..
- FOR CAPSULE FILLING MACHINE - Size perfectly fits for capsule filling machine 00. Less than 1% damage rate..
- HIGH QUALITY - Over 30 yrs of capsules munufacturing experience. Strict quality control. Pure ingredients which are pharmaceutical grade HPMC (derived from vegetable cellulose) and purified water. No preservatives and additives. Allergen and gluten free. Free of GMOs, sodium lauryl sulfates, ethylene oxide or sulfites..
- PERFECT PACKAGING - Capsule caps and bodies are separated packed with labeled resealable bags. And both of them are in a resealable bag..
- SATISFACTION GUARANTEED - If you are not satisfied with your purchase, please contact us and we will do our best to make it right..
Check StockCuttlebug Cutting Plate B 6'X13'-
- Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting..
- Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
- The see-through PC plastic allows easy placement of materials for a precise die cut..
- Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
- The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock