Categories

Best Septic Alarm Float Switch

DEVMO Mini Indicator Vertical Water Level Sensor Stainless Steel 45mm Float Switch

  • ★This is a Mini stainless steel float switch,contains no mercury..
  • ★This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device..
  • ★This Mini float switch is a simple structure,easy installation liquid level controller.It does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperature can be used in any environment..
  • ★Light weight and simple working principle,high reliability..
  • ★The versatility of this vertically monted sensor means that it can be installed either at the top or base of your tank,depending on whether you wish to detect the water`s rise or fall..
Check Stock

Supplying Demand CP230 SPCP230 HVAC Condensate Pump 230V with Audible Alarm

  • This pump is designed to remove condensate from AC systems, condensing furnaces and boilers, ice machines, drinking fountains, and coolers. These pumps incorporate an audible alarm, and an overflow switch that can be used to shut down the system..
  • Motor Horsepower: 1/10 HP | Voltage:208 / 230 VAC | Watts: 75 W | Amperage: .72 A | Frequency: 50 / 60 Hz | Motor Overload Protector:Yes | Height Total: 7.25" | Length Total: 11.25" | Width Total:5" | Tank Capacity: 1/2 Gal. | Discharge: 3/8" Barb | Maximum Temperature: 110° F | Alarm Sound Level: 80 dB.
  • 22 feet of standard lift @ 10 GPH | Independent NC safety switch & motor switch | Suitable for acidic condensate | 1/4" quick connect terminals | 3 terminals provided for easy connection.
  • Independent NO audible alarm switch rated @ 80 dB | Specially designed leak-free motor and safety float | 3/8" rubber ball check valve.
  • Vibration absorbing feet | Metal side mount tabs, 11.5" on center | 3 inlet holes | 6 foot power cord included.
Check Stock

Briidea Hi-Lo Sump Pump Controller with Dual Float Switch and Overload Protection (White)

  • Compatible with all Sump pump and Utility pump(.
  • With adjustable position dual float switch, you can turn on/turn off your pump levels from 1/2'' to 20' effectively and precisely according to your actual needs, extends your pump life.
  • The dual float switch sensor is made of 304 stainless steel and is not affected by mineral or water debris. It has strong corrosion resistance and never needs to be cleaned.
  • Our pump controller can completely overcome the shortcomings of the traditional mechanical float switch which is prone to mechanical failure. Long life and small size,no moving parts in pit ensures reliability and is used in various application scenarios, stable and safe.
  • With smart button design, you can manually turn your pump on or off when needed! Sounds an alarm when pump is not working correctly，helps prevent water damage.
Check Stock

Zoeller 57-0001 M57 Basement High Capacity Sump Pump, 1 Pack, Stainless Steel

  • 3/10 HP pump for residential sump pits or septic tanks.
  • Automatic model with integral float switch.
  • Performance: 43 GPM at 5' TDH, shut-off: 19.25' TDH.
  • All cast iron construction with stainless steel guard and handle.
Check Stock

Supplying Demand CP115 SPCP115 HVAC/R Condensate Pump with Alarm 1/10HP 115VAC

  • High quality pump designed to remove condensate from AC systems, condensing furnaces and boilers, ice machines, drinking fountains, and coolers. These pumps incorporate an audible alarm, and an overflow switch that can be used to shut down the system..
  • Applications include HVACR, ice machines, drinking fountains, and coolers..
  • 22 feet of standard lift at 10 GPH | Independent NC safety switch & motor switch | Suitable for acidic condensate | 1/4 inch quick-connect terminals | 3 terminals are provided for easy connection | Independent NO audible alarm switch rated at 80 dB.
  • Specially designed leak-free motor and safety float | 3/8 inch rubber ball check valve | Vibration absorbing feet | Metal side mount tabs, 11-1/2 inches on center | 3 inlet holes | 6 foot power cord included.
  • Alarm Sound Level: 80 dB | Maximum Temperature: 110° F | Tank Capacity: 1/2 gallon | Discharge: 3/8 inch | Barb. Frequency: 60 Hz | Motor Overload Protector: Yes | Amperage: 1.45 A | Watts: 80 W | UL Listed: Yes | Motor Horsepower: 1/10 HP | Voltage: 115 VAC | Dimensions: 5 inches wide x 11-1/4 inches long x 7-1/4 inches tall.
Check Stock

Acquaer 1/3 HP Submersible Sump Pump,3150 GPH Cast Iron Sewage/Effluent Pump with Integrated Snap-action Float Switch for Septic Tank,Basement,Flooding Area

  • 【POWERFUL SEWAGE PUMP】Voltage:115V/60Hz.
  • 【AUTO/MANUAL OPERATION】 With integral snap-action float switch for automatic operation.
  • Activates when water reaches float switch,auto off when water drops down. Automatic work, no need to manually start..
  • 【BUILT-IN OVERLOAD PROTECTION 】 Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut off automatically to protect the motor..
  • 【CAST IRON CONSTRUCTION】 Acquaer sewage pump built by cast iron, provides superior reliability and it has corrosion resistant coated avoid corrosion effectively..
  • 【GOOD COMPATIBILITY】Equipped with reinforced engineered non-clogging vortex impeller and 1-1/2'' NPT discharge, capable of passing 1/2" diameter solids. Ideal for use in residential sewage, basement and septic tank..
Check Stock

Superior Pump 92060 Sump Alarm System with 15-Foot Tethered Float Switch

  • Monitors liquid levels in sump and sewage basins, holding tanks and other water applications.
  • Non-corrosive NEMA enclosure, rated for indoor use.
  • 9 Volt battery backup, battery not included.
  • 87 Decibel alarm horn with low battery chirp.
  • Comes complete with alarm, 15 foot float switch and mounting clip.
Check Stock

Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump …

  • 1/2 HP pump for residential sump pits or septic tanks.
  • Automatic model with integral float switch, 1½" discharge, passes 1/2" solids.
  • Performance: 72 GPM at 5' head, shut-off: 23' TDH.
  • All cast iron construction with stainless steel guard and handle.
Check Stock

Wayne WSSM40V 1/2 hp Combination Primary and Backup Sump Pump System

  • 120 volt primary pump - 1/2 hp pumps up to 4200 gph at 0'.
  • Tested to 1 million cycles* (Primary only). Integrated vertical float switch with solid, leak free polypropylene float for automatic operation, 9 inch ON level and 4 inch OFF level.
  • Primary pump's top suction design filters debris and minimizes clogging.
  • Alarm system, with status indicator lights, lets homeowner know when back-up system is active.
  • Designed for 15" diameter or larger sump basins.
  • 12 volt back-up pump pumps up to 3300 gph at 0'.
Check Stock

BioCube Size 29 & Size 32 Replacement Pump

  • Type: 2PCS M16 Water Level Sensor, Switching voltage (Max): 110V DC.
  • Float level switch is a kind of liquid level control device with simple structure, no external power supply, no complicated circuit, convenient to use. Has the advantage of smaller size and longer service life than mechanical switch..
  • Mainly used to sense the liquid level in a tank to turn on/off a pump, an indicator , an alarm or other device..
  • 2 Way optional to install as normally closed/open switch according to your needs..
  • Suitable for hydroponics, saltwater , freshwater , gardening, aquariums for power control, pet bowls, fish tanks, filtration, heating etc..
Check Stock

Acquaer 1/2HP Submersible Sewage/Effluent Pump, Cast Iron, 115V 6000 GPH Automatic Tethered Float Switch, Sump Pump for Septic Tank, Basement, Residential Sewage, 2'' NPT Discharge

  • Great Performance: 1/2 HP submersible sewage ejector pump features efficient an oil-filled split capacitor motor with high flow. It can pump up to 6000 GPH or lift water up to 27ft vertically, perfect for residential sewage and septic systems. It can work in harsh environments and offer long service life.
  • Auto/Manual Operation: Adjustable mechanical float switch automatically turns on/off the pump depending on water level in sump basin or septic pit. Standard 10' power cord with piggy-back plug allow automatic operation of this electric sewage pump. DO NOT lift the pump by the power cord or it will be damaged permanently.
  • Durable & Clog-resistant Design: This heavy-duty dirty water pump is equipped with rugged cast iron casing, reinforced engineered non-clogging vortex impeller and 2'' NPT discharge, capable of passing 2" diameter solids. As a waterproof effluent pump, it's ideal for basements or below grade installations.
  • Overheat Protection: Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut off automatically to protect the motor. Fully immerse the pump before startup and prevent it from freezing in cold winter.
  • Wide Applications: Designed for residential and co....
Check Stock

Acquaer 1/2HP Submersible Sewage/Effluent Pump, 6000 GPH, Cast Iron, Automatic Tethered Float Switch, 115V Sump Pump for Septic Tank, Residential Sewage, Basement, 2” NPT Discharge

  • Great Performance: 1/2 HP submersible sewage ejector pump features efficient an oil-filled split capacitor motor with high flow. It can pump up to 6000 GPH or lift water up to 27ft vertically, perfect for residential sewage and septic systems. It can work in harsh environments and offer long service life.
  • Auto/Manual Operation: Adjustable mechanical float switch automatically turns on/off the pump depending on water level in sump basin or septic pit. Standard 10′ power cord with piggy-back plug allow automatic operation of this electric sewage pump. DO NOT lift the pump by the power cord or it will be damaged permanently.
  • Durable & Clog-resistant Design: This heavy-duty dirty water pump is equipped with rugged cast iron casing, reinforced engineered non-clogging vortex impeller and 2” NPT discharge, capable of passing 2″ diameter solids. As a waterproof effluent pump, it’s ideal for basements or below grade installations.
  • Overheat Protection: Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut off automatically to protect the motor. Fully immerse the pump before startup and prevent it from freezing in cold winter.
  • Wide Applications: Designed for residential....
Check Stock

Acquaer 3/4HP Submersible Sewage/Effluent Pump, Cast Iron, 115V 6400 GPH Automatic Tethered Float Switch, Sump Pump for Septic Tank, Basement, Residential Sewage, 2'' NPT Discharge

  • Great Performance: 3/4 HP submersible sewage ejector pump features efficient an oil-filled split capacitor motor with high flow. It can pump up to 6400 GPH or lift water up to 29ft vertically, perfect for residential sewage and septic systems. It can work in harsh environments and offer long service life.
  • Auto/Manual Operation: Adjustable mechanical float switch automatically turns on/off the pump depending on water level in sump basin or septic pit. Standard 10' power cords with piggy-back plug allow automatic operation of this electric sewage pump. DO NOT lift the pump by the power cord or it will be damaged permanently.
  • Durable & Clog-resistant Design: This heavy-duty dirty water pump is equipped with rugged cast iron casing, reinforced engineered non-clogging vortex impeller and 2'' NPT discharge, capable of passing 2" diameter solids. As a waterproof effluent pump, it's ideal for basements or below grade installations.
  • Overheat Protection: Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut off automa....
Check Stock