Categories

Best Serial Data Transmission

Dorhea 3PCS BLE 4.0 Bluetooth Module AT-09 for Ardu-ino CC2540 CC2541 BLE Serial Wireless Module Compatible with HM-10

  • The master-slave module has three functions of transparent transmission, remote control and PIO acquisition. It can be switched and set through the AT command set. It is easy to use the same as the Bluetooth serial port module you have used before, without changing the PCB and the lower computer program..
  • Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
  • Support UART/I2C interface, and support SPP Bluetooth serial port protocol, has the advantages of low cost, small size, low power consumption, high sensitivity of sending and receiving, etc., only need to be equipped with a few peripheral components to achieve its powerful functions..
  • This module is mainly used in the field of short-distance data wireless transmission. It can be easily connected to the Bluetooth device of the PC, or the data between the two modules can be intercommunicated..
  • When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
Check Stock

HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane.
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid..
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g..
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect..
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices..
Check Stock

AYA DB9 (9-Pin) Female to DB25 (25-Pin) Male Serial Null Modem Cable (6Ft)

  • This cross wired serial/null modem cable features one DB9 female and one DB25 male connector, allowing you to connect a serial printer to a 25-pin serial port, or transfer files from PC to PC via serial connection..
  • Our line of null modem serial cables allows two DTE or DCE devices to communicate with no conflict in data transmission..
  • Designed with a rugged, overmolded construction that provides added strain relief and a solid connection.
  • Pinouts: 1-4+5 2-2 3-3 4-6 5-7 6-20 7+8-8 9-22 G-G.
Check Stock

DORHEA 5PCS DHT22 AM2302 Digital Temperature and Humidity Sensor, AM2302 Temp Humidity Monitor Sensor Replace SHT15 SHT11 for Raspberry Pi

  • DHT22 main chip is AM2302 high sensitive temperature humidity sensor. Single-bus digital signal output, bidirectional serial data..
  • 4 Pins Sequence Number: Pin1-VDD(Power 3.3V-5.5V).
  • Pin2-SDA, serial data interface, two-way interface.
  • The DHT22 is a reliable sensor for determining temperature and humidity. The output is serial as a digital bit sequence.The sensor is ideal to monitor the room climate or to build a weather station..
  • Each AM2302 sensor is calibrated in a very accurate humidity calibration room. The calibration coefficients are stored in OTP memory in the form of programs that the calibration coefficients are invoked within the sensor during signal processing..
  • Single-wire serial interface, the system integration becomes simple and quick. Ultra-small size, low power consumption, signal transmission distance up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications. Products are 4-pin single row pin package, easy to connect..
Check Stock

Portserver Ts 2PORT RS-232 Serial to Ethernet Device Server

  • Increased wireless speed, improved reliability and extended transmission range with dual band 802.11n.
  • Lantronix SmartRoam technology provides seamless mobile connectivity and improved reliability.
  • Enterprise-level security options including AES, SSL, SSH and EAP for data encryption and authentication.
  • Simple device set-up, configuration and monitoring with powerful, industry-standard management tools (web, CLI, XML), Lantronix DeviceInstaller, QuickConnect, and WPS support.
  • Offers high performance Ethernet or wireless connectivity for remote access.
  • Provides bullet-proof security by offering robust data encryption and authentication options including AES, SSH, and SSL..
  • Provides control of serial communication on connected devices and the flexibility to have data globally available..
Check Stock

Comidox 5PCS WS2812 5050 RGB 8 LEDs Light Strip Driver Board 8 Channel Built-in Full Color-Driven Development Board Black for Arduino

  • 5050 high-brightness LED, built-in control chip, only need one IO port to control multiple LEDs. High-brightness LED, high brightness consistency..
  • Chip built-in shaping circuit, signal distortion will not accumulate, stable display..
  • There are connection interfaces at both ends, which can be directly plugged in. The serial connection interface can complete data reception and decoding through one signal line..
  • Three primary colors 256 levels of brightness adjustment, 160,000 color true color display effect, scanning frequency is not less than 400Hz / S. Data transmission and transmission speed up to 800Kbps..
  • When the refresh rate is 30 frames/second, the number of consecutive steps in the low-speed cascade mode is not less than 512 points..
Check Stock

HiLetgo Smallest SIM800L GPRS GSM Breakout Module Quad-Band 850/900/1800/1900MHz SIM Card Slot Onboard with Antenna 3.7~4.2V

  • Mini GSM / GPRS breakout board is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission..
  • The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode..
  • It communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands..
  • AT command interface with "auto baud" detection..
  • TTL serial port for serial port, you can link directly to the microcontroller.
Check Stock

PUSOKEI Desktop Computer Mainboard for Intel G41M LGA775, G41M LGA775 Series Computer Motherboard,6 Channel Audio,2xDDR3/PCIE X16/USB3.0/SATA/IDE/RJ45/COM/VGA/Pci

  • PCI+PCI‑E 16X: This industrial motherboard supports expansion cards such as network adapters, sound cards, and hard disks of PCI+PCI‑E 16X port..
  • Stable Capacitor Filtering: This industrial motherboard provides more stable capacitor filtering and performance..
  • 5 PCI Ports: This industrial motherboard possesses 5 PCI ports to meet various expansion needs..
  • Data Transmission: This industrial motherboard provides VGA expansion pin, LPT print port and COM serial port for data transmission..
  • Wide Application: This industrial motherboard supports 2 x DDR3 memory, 4 x SATA hard disk port, suitable for industry, industrial control equipment..
Check Stock

Hayes Accura H08-15328 Data/Fax Modem - Serial - 1 x RJ-11 Phone Line, 1 x RS-232 Serial - 56 Kbps

  • ITU-T V.92, ITU-T V.90, ITU-T V.34 Modulation.
Check Stock

C2G 52184 Serial RS232 DB9 Null Modem Cable with Low Profile Connectors M/F, In-Wall CMG-Rated, Black (6 Feet, 1.82 Meters)

  • Provides serial connections where CMG rating is required for in-wall installation.
  • Audio/Video installations in educational and commercial settings often require in-wall rated cable.
  • Our CMG-rated line was specifically engineered to meet this requirement while overcoming common challenges faced by installers in these environments.
  • Low-Profile connectors (1.25 in total depth) save valuable space in the gang box.
  • The rounded shape accommodates smaller monitor mounts so that the cable can be easily hidden from view..
  • Specifically designed to support RS-232/Serial communications, this cable is fully shielded to prevent unwanted EMI/RFI interference.
  • The transmit and receive signals are crossed to ensure proper data transmission..
  • Connector 1: Low Profile DB9 Male Connector 2: Low Profile DB9 Female.
Check Stock

SATA Card 8 Port, PCIE to SATA 3.0 Controller Expansion Board with Low Profile Bracket, SATA3.0 Interface Expansion Card for Windows 7/8/XP/10

  • 【PCI-E to SATA 3.0 expansion card】Use with SATA3.0 data cable for best results. with 8 x SATA3.0 interfaces expansion interface..
  • 【SATA Controller】Compatible with SATA6G, 3G and 1.5G hard drives. Fit for Windows 7/8 / XP / 10 Fit for Ubuntu support system, PCI-E 1X 2X 4X 8X 16X interface..
  • 【Serial ATA 3.0】Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
  • PCI-Express v2.0 compatible, backward compatible with PCI-Express v1.0..
  • 【AHCI1.0 Mode and IDE Mode】Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching, and hot plug..
  • 【6.0 Gbit/s / 3.0 Gbit/s / 1.5 Gbit/s Transmission】Supports communication speeds of 6.0 Gbit/s, 3.0 Gbit/s and 1.5 Gbit/s.
  • supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i..
Check Stock

QIVYNSRY 3PACK SATA Cable III 3 Pack 6Gbps Straight HDD SDD Data Cable with Locking Latch 50cm 18 Inch for SATA HDD, SSD, CD Driver, CD Writer, White

  • ★Data High-speed Transmission:only 5 seconds to transfer a 1GB file..
  • ★Cost-effective 3 Pack Combo: 3 Pack White SATA 3 cable is a cost effective way to provide replacement or spare for different SATA systems or for RAID configuration..
  • ★SATA 3 cable is designed to connect motherboards and host controllers to internal Serial SATA hard drives and DVD drives, quickly upgrading your computer for expanded storage..
  • ★6 Gbps Fast Data Transfer: The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II..
  • ★Secure Connection: Locking latch on each end of the cable to ensure secure connections for fast and reliable file transfer. What You Get: QIVYNSRY SATA 3 cable x3, 18-month warranty and lifetime friendly customer service..
Check Stock

TECHTOO 4 Port Professional FTDI CHIP USB to Serial RS232 DB9 Adapter Converter Serial Cable 9-Pin Male to Male with Thumbscrews

  • HOW IT WORKS: TECHTOO USB to Quad Port RS232 DB9 Serial Adapter is Designed for Connecting to Serial Devices Such As DB9 Equipped Serial Modems, ISDN Terminal Adapters, Digital Cameras, Label Writers, Palm PCs, Barcode Scanners, PDAs etc Through USB port with 1Mbps Data Transfer Rate.
  • CONNECTORS: With Standard USB Type A Male to Standard 9-pin DB9 RS-232 Serial MALE Connector with Hexnuts.
  • CONDUCTOR & SHIELDING: Tinned Copper Conductor and Triple Shielding Ensure the Best Data Transfer Rate. Powered by USB Port, No External Power Adapter Required. Simple Installation, Plug & Play after One Time Driver Installation ( Product come with a Driver CD ).
  • CHIPSET & SUPPORTED OS: FTDI FTDI232RL Chipset for Widest Possible Stablity and Compatibility with Windows (10/8.1/8/7XP), Mac, Linux, etc. Support Almost All Serial COM Port.
  • 12 Month WARRANTY: USB 2.0 to Serial (9-Pin) DB-9 RS-232 Converter Cable is Backed with 12 Month Warranty and Customer Service Support.
Check Stock