Categories

Best Serial Shield

Genuine OEM Honda HRR2166PDA HRR2166VKA Walk-Behind Lawn Mowers Rear Safety Shield KIT

  • PLEASE VERIFY THE CORRECT PARTS FOR YOUR ENGINE/EQUIPMENT BEFORE SUBMITTING YOUR ORDER - IF YOUR ENGINE IS NOT LISTED IN THE DESCRIPTION, PLEASE....
  • FOR PARTS LOOK UP, PLEASE PROVIDE SELLER WITH THE FOLLOWING INFOS: ENGINE/EQUIPMENT'S MODEL, CODE TYPE AND SERIAL/FRAME NUMBER.
  • GENUINE OEM Honda (HRR2166PDA) (HRR2166VKA) Walk-Behind Lawn Mowers REAR SAFETY SHIELD KIT.
  • USE FROM FRAME SERIAL # MZCG-8000001 to MZCG-8199999 *****.
Check Stock

Genuine OEM Honda HRR2165VXA HRR2166VXA Walk-Behind Lawn Mowers Rear Safety Shield KIT

  • PLEASE VERIFY THE CORRECT PARTS FOR YOUR ENGINE/EQUIPMENT BEFORE SUBMITTING YOUR ORDER - IF YOUR ENGINE IS NOT LISTED IN THE DESCRIPTION, PLEASE....
  • FOR PARTS LOOK UP, PLEASE PROVIDE SELLER WITH THE FOLLOWING INFOS: ENGINE/EQUIPMENT'S MODEL, CODE TYPE AND SERIAL/FRAME NUMBER.
  • GENUINE OEM Honda (HRR2165VXA) (HRR2166VXA) Walk-Behind Lawn Mowers REAR SAFETY SHIELD KIT.
  • USE FROM FRAME SERIAL # MZCG-7800001 to MZCG-8199999 *****.
Check Stock

WayinTop 20x4 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter (Yellow Green/2004)

  • 【20x4 LCD Display】With this shield, you can display whatever you want by programming the for Arduino board. Therefore, this is a perfect choice to make your project more interesting and vivid! Totally display 20 characters in one row, 4 rows can display 80 characters..
  • 【IIC Interface Adapter】No need to buy the adapter extra, this kit contains a IIC/I2C/TWI Serial Interface Adapter, with witch you can start your project at any time..
  • 【Easy to Use】 Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line). Address of the module: 0x27.
  • 【Support IIC Interface】It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
  • 【Widely Applications】LCD display module based on the popular controller, works great with for Arduino and other micro-controllers..
Check Stock

Superbat SDI Cable BNC Cable 3G/6G/12G (Belden 1694A)，10FT/15FT/30FT/50FT/100FT/200FT,Supports HD-SDI/3G-SDI/4K/8K，SDI Video Cable Precision Video Cable(1Pcs)

  • Specifications: Both ends BNC male (plug) | Connector: Gold plated | Impedance: 75 Ohm | Cable Type: Belden 1694A.
  • 18 AWG|Standard Definition SD-SDI (270 Mbps, ST 259) HD standard HD-SDI (1.483 Gbps, ST 292)3G-SDI (2.97 Gbps, ST 424) 6G-SDI (5.94 Gbps, ST 2081) 12G-SDI (11.88 Gbps, ST 2082).
  • BELDEN 1694 PRECISION SERIAL DIGITAL VIDEO COAXIAL CABLE: features exceptionally low attenuation and a 4.5 GHz Bandwidth in an RG6 type coax cable. Featuring RG-6/U type, 18 AWG solid .040" bare copper conductor, Gas-injected FHDPE - Foam High-Density Polyethylene + tinned copper braid shield (95% coverage tinned copper braid combined with Duofoil foil/poly/foil 100% shield), PVC - Polyvinyl Chloride..
  • Is suitable for HDTV and professional SDI applications: Supports HD-SDI, 3G-SDI, component, composite, MADI, WORD CLOCK, SYNC, etc.This shielded coaxial cable is compatible with a wide variety of popular software, including Blackmagic, AJA, Grass Valley, Evertz, Marshall, Cobalt Digital, Atomos, Postium, AVID, and Decimator. Our HD-SDI cable is great for use in HD-serial digital video transfer,HDTV upgrades, broadband facilities, and other applications with HD-SDI video..
  • Never worry about any security problems. We are confident in the quality of our cable and will....
Check Stock

Superbat SDI Cable BNC Cable 3G/6G/12G (Belden 1694A)，10FT/15FT/30FT/50FT/100FT/200FT,Supports HD-SDI/3G-SDI/4K/8K，SDI Video Cable Precision Video Cable(1Pcs)

  • Specifications: Both ends BNC male (plug) | Connector: Gold plated | Impedance: 75 Ohm | Cable Type: Belden 1694A.
  • 18 AWG|Standard Definition SD-SDI (270 Mbps, ST 259) HD standard HD-SDI (1.483 Gbps, ST 292)3G-SDI (2.97 Gbps, ST 424) 6G-SDI (5.94 Gbps, ST 2081) 12G-SDI (11.88 Gbps, ST 2082).
  • BELDEN 1694 PRECISION SERIAL DIGITAL VIDEO COAXIAL CABLE: features exceptionally low attenuation and a 4.5 GHz Bandwidth in an RG6 type coax cable. Featuring RG-6/U type, 18 AWG solid .040" bare copper conductor, Gas-injected FHDPE - Foam High-Density Polyethylene + tinned copper braid shield (95% coverage tinned copper braid combined with Duofoil foil/poly/foil 100% shield), PVC - Polyvinyl Chloride..
  • Is suitable for HDTV and professional SDI applications: Supports HD-SDI, 3G-SDI, component, composite, MADI, WORD CLOCK, SYNC, etc.This shielded coaxial cable is compatible with a wide variety of popular software, including Blackmagic, AJA, Grass Valley, Evertz, Marshall, Cobalt Digital, Atomos, Postium, AVID, and Decimator. Our HD-SDI cable is great for use in HD-serial digital video transfer,HDTV upgrades, broadband facilities, and other applications with HD-SDI video..
  • Never worry about any security problems. We are confident in the quality of our cable and will....
Check Stock

StarTech.com PCI Express Serial Card - 16 DB9 RS232 Ports - Low + Full Profile - Multiport Serial Adapter - PCIe Serial Card (PEX16S550LP)

  • Add 16 RS232 serial ports (DB9) to your low or full-profile computer through a PCI Express slot.
  • This 16-Port PCI Express Serial Card provides high-speed PCIe serial card with 16 DB9 RS232 ports from a single PCIe slot.
  • Multiport serial adapter card enables high-speed serial communication with data transfer rate up to 921.6 Kbps.
  • Compliant with PCI Express 1.0a/1.1 and compatible with 1x/2x/4x/ 8x/16x PCIe bus.
  • PCIe serial card / Multiport serial adapter card / Serial PCIe card / Serial expansion card / 16 port serial card / pci serial port / pcie serial card / PCI serial card / pci e serial card / pci express serial card.
Check Stock

KEYESTUDIO Pico IO Prototype Expansion Board for Raspberry Pi Sheild DIY Kit

  • The Keyestudio Pico IO prototype expansion board works with the Raspberry pico board..
  • It can expand IO ports of the pico board..
  • There are two IIC ports, a serial communication interface , three analog ports and six digital ports..
  • This sensor board simplifies the circuit and makes it easy to connect with commonly used sensors. You can stack a Raspberry Pi pico board onto this shield..
  • KEYESTUDIO Technical Support - If there are any problems during use, please feel free to contact us and we will respond quickly to technical support..
Check Stock

DollaTek SIMCOM SIM900 GSM GPRS Quad-Band Modules 2G Development Shield Board for R3 Mega with Antenna

  • Quad-Band 850/900/1800/1900 MHz - could work on GSM networks in all countries around the world, work with Uno Mega.
  • Embedded TCP / UDP stack - allows you to upload data to a Web server | RTC supported | selectable serial port | Jac speakers and headphones.
  • Note: This is a new version (64M version), SMS support MMS: Multimedia message and Short Message Service - so it is possible to send small amounts of data over the network (ASCII or raw hexadecimal).
  • The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
Check Stock

Outdoors & Spares Drive Wheel Replaces T o ro 119-0311 205-360 Self propelled Lawn Mower Front Drive Wheels 8' 20330 20339 20350 20370 20954 137-4832 2 Pack

  • Replaces 119-0311, 137-4832,115-2878 Drive Wheel.
  • Fits models:T o ro 20330 serial no. 311000001-311999999, 20331 serial no. 311000001-312999999, 20339 serial no. 31400000-499999999, 20350 serial no. 311000001-311999999, 20351 serial no. 311000001-311999999, 20370 serial no. 312000001-316999999, 20371 serial no. , 20377 serial no. 316000001-499999999, 20378 serial no. 312000001-499999999, 20954 serial no. 311000001-499999999 and 20959 serial no. 315000001-499999999.
  • Fits Models: T o ro 20330, 20331, 20339, 20350, 20351, 20370, 20371, 20377, 20378 and 20954 22" Recycler mowers.
  • Fits: T o ro 20001, 20003, 20005, 20007, 20008, 20009, 20012, 20013, 20014, 20016, 20017, 20018, 20019, 20031, 20041, 20047, 20049, 20051, 20064, 20066, 20067, 20068, 20070, 20071, 20073, 20074, 20075, 20076, 20079, 20086, 20089, 20094, 20096, 20098, 20110, 20112, 20113, 20655, 20656, 20658.
  • Wheel Size 8" Hub offset 3/4" Bore size 1/2".
Check Stock

DTECH 6 Feet USB to RS232 DB9 Female Serial Adapter Cable Windows 11 10 8 7 Mac Linux Serial to USB 2.0 (PL2303 Chip)

  • RS232 USB to serial female adapter cable allows any PC to connect serial devices and programs that communicate through COM ports.
  • DB9 Serial cable to USB adapter is designed for connecting Serial devices such as DB9 equipped PCs, routers, GPS, Programming machine, barcode scanners, label writers, serial modems, digital cameras, card readers, palm PCs and digital organizers, etc.
  • 6ft USB to serial cable with standard USB Type A Male to standard 9-pin DB9 Female RS-232 serial connector.
  • USB to RS232 adapter is with Prolific PL-2303 Chipset for widest possible compatibility with Windows 11, 10, 8, 7, XP, Vista, 2000, 98, MacOS8 or higher, Linux 2.4.0 and later, and other platforms..
  • Note that the interface is 9-pin RS232 Female socket, please make sure that your serial device with a 9-pin Male Port before purchasing this USB to serial port adapter with Prolific PL2303 chipset (NOT FTDI chip).
Check Stock

HiLetgo 2.2 Inch ILI9341 SPI TFT LCD Display 240x320 ILI9341 LCD Screen with SD Card Slot for Arduino Raspberry Pi 51/AVR/STM32/ARM/PIC

  • Durable hard PCB board and SD card socket, ideal for 5110 interface.
  • 2.4 inch TFT LCD shield without touch panel, fast to operate.
  • Support Serial SPI Mode, Interface 4-Wire SPI, Need 4 IOs from your MCU only.
  • Support a variety of microcontroller IO connection, professional and practical.
  • 5V compatible, use with 3.3V or 5V logic.
Check Stock

champion Commercial or Household Juicer Blank : White

  • Champion Juicer Blank Screen Accessory – White.
  • Fits both the Commercial (G5-PG-710) and Household Models (G5-NG-853-S).
  • This is an Original Manufacturers Part. Not an OEM.
  • This item will fit your juicer ONLY if the serial number is between the serial numbers listed in the below product description. Your serial number is located on the back of the machine near the on/off switch.
Check Stock

Andifany PCIE 2S Serial Port Card DB-9 Pin -232 Serial Industrial COM Port Expansion Card AX99100 for PC

  • Compatible devices: serial connected devices, serial network/monitoring equipment, data acquisition systems, POS terminals and industrial PCs, serial I/OUSB for add-on cards, I/O expansion for embedded systems.
  • 2S + SPI (PCIe to dual serial and SPI) and LB (PCIe to local bus/ISA)-Like) are suitable for different types of applications..
  • AX99100 is a single-chip solution that can fully integrate PCIe 2.0 Gen 1 endpoint controller and SerDes with various peripherals, such as two/four high-speed serial ports, one parallel port, I2C master, high-speed SPI, local Bus (ISA-Like)) and GPIO..
  • Composed of four main configurations, such as 2S (PCIe to Dual Serial), 2S + 1P (PCIe to dual serial and single parallel),.
  • Single-channel (X1) PCI Express endpoint with integrated PHY controller.
Check Stock