AUTO METER 8463 Ford Factory Match 2-1/16

  • Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation.
  • Includes data acquisition grade solid-state pressure transducer, providing unmatched accuracy and durability even in the harshest environments.
  • Auto Meter’s race proven digital stepper motor electric instruments provide unmatched accuracy while keeping hazardous fluids outside of the vehicle.
  • The accuracy of digital stepper motor gauges is further increased by utilizing a self calibration sequence during power up.
  • Gauge kit includes 1/8” NPT stainless steel pressure transducer, wiring harness, mounting hardware, and detailed instructions for installation.
Check Stock

1852068 Durable 7-Pin Transducer Adapter Cable, Replacement Adapter Cable Compatible with Humminbird Fish Finder and Minn Kota Universal Sonar 2 (US2) Transducer, Black

  • Compatible With 2D Sonar Only: The 1852068 transducer adapter cable is compatible with Humminbird Fish Finder and Minn Kota Universal Sonar 2 (US2) Transducer on the trolling motor. Universal Sonar 2 offers advanced water temperature sensing and dual-beam PLUS technology for the best view of the water below. It utilizes dual-beam technology to view the water at 20° and 60° or combine both views for a new perspective. Compatible with 200 kHz/83 kHz, only conventional 2D sonar is available..
  • IP68 Waterproof: The sensor adapter cable has a shielded, metal-tipped connector with IP68 water resistance and has undergone strict water immersion experiments, which are corrosion and rust-resistant to ensure the it maintains optimal efficiency. Protect the cable against any kind of sonar interference.
  • Premium Material: The 1852068 transducer adapter cable is made of high-quality steel and copper metal materials which are durable and suitable for rugged conditions. Top-quality rubber and plastic materials are well-protected without clips, ties, or exposed wires. you don’t have to worry about worrying about getting rust or damage during a long time of use..
  • Plug & Play: The 1852068 transducer adapter cable is easy to install and connected with the trolling motor ....
Check Stock

HOOK2 4X - 4-inch Fish Finder with Bullet Skimmer Transducer

  • EASY TO USE: The Lowrance HOOK2 4x Fish Finder features auto-tuning sonar and phone-like menus giving you more time to spend fishing and less time dealing with settings..
  • WIDER SONAR COVERAGE: The HOOK2 4x offers a wide-angle sonar cone giving you double the coverage of traditional fish finders..
  • EASY SETUP: A single transducer can be mounted on the transom, inside the hull, on the trolling motor or through a scupper hole..
  • TRANSDUCER INCLUDED: The included Bullet Skimmer transducer gives you traditional 2-D sonar (fish arch) views..
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

Garmin 010-01960-00 GT20-TM Transducer

  • Consistently displays fish arches as well as clear pictures of objects, structure and fish that pass below your boat.
  • 20 ft. transducer cable with built-in fast response temperature sensor has a power rating of 500 W.
  • Depth of 1,900 ft. (traditional) and 750 ft. (ClearVü).
  • Operating frequencies of 77/200 kHz (traditional) and 455 kHz (ClearVü).
  • Transducer comes with transom and trolling motor mounts and installation instructions.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

HOOK2 Fish Finder with TripleShot Transducer and GPS Plotter

  • EASIEST TO USE: The Lowrance HOOK2 4x Fish Finder features auto-tuning sonar and phone-like menus giving you more time to spend fishing and less time dealing with settings..
  • WIDER SONAR COVERAGE: The HOOK2 4x offers a wide-angle CHIRP sonar cone giving you double the coverage of traditional fish finders..
  • EASY SETUP: A single transducer can be mounted on the transom, inside the hull, on the trolling motor or through a scupper hole. The HOOK2 4x is ideal for small fishing boats or kayaks with limited console space..
  • FISH FINDER & GPS: The HOOK2 4x provides basic navigation with a GPS plotter that allows you to add waypoints, follow trails, and navigate..
  • TRANSDUCER INCLUDED: The included Bullet Skimmer transducer gives you traditional 2-D CHIRP sonar (fish arch) views..
Check Stock

HOOK2 7X - 7-inch Fish Finder with SplitShot Transducer and GPS Plotter (Renewed)

  • Hook2 7x - 7-inch Fish Finder with Splitshot transducer and GPS plotter.
  • Easiest to use: the Lowrance Hook2 7 fish finder features auto-tuning sonar and phone-like menus giving you more time to spend fishing and less time dealing with settings..
  • Wider SONAR COVERAGE: The Hook2 7x offers a wide-angle CHIRP sonar cone giving you double the coverage of traditional fish finders..
  • Easy setup: A single transducer can be mounted on the transom, inside the hull, on the trolling motor or through a scupper hole..
  • MORE SONAR VIEWS: The Lowrance HOOK2 7x comes complete with a SplitShot transducer which gives you DownScan sonar (straight down) and CHIRP sonar (fish arch) views..
  • Fish Finder & GPS: The Hook2 7 provides basic navigation with a GPS plotter that allows you to add waypoints, follow trails, and navigate..
Check Stock

Lowrance SplitShot Skimmer Transducer, fits Lowrance HOOK2 Fish Finders

  • Fits - Lowrance HOOK² 5, 7, 9 and 12 inch Fish Finder models..
  • Multiple Views - SplitShot transducer gives you DownScan sonar (straight down) and CHIRP sonar (fish arch) views..
  • Wider Sonar Coverage - A wider sonar cone gives you double the coverage of traditional fish finders..
  • Easy to Install - A single transducer can be mounted on the transom, inside the hull, on the trolling motor or through a scupper hole..
Check Stock

Garmin Striker 4 3.5" Chirp Fishfinder GPS (010-01550-00) with Protective Cover

  • GARMIN USA AUTHORIZED - Includes Full GARMIN USA WARRANTY.
  • Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS.
  • Includes CHIRP (77/200 kHz) sonar transducer.
  • transmit power (200 W RMS)/(1,600 W peak-to-peak).
  • IN THE BOX: STRIKER 4 | Dual-beam transducer | Transom and trolling motor mounts | Tilt/swivel mount | Power cable | Documentation | Garmin Authorized Full USA Warranty.
  • BUNDLE INCLUDES: Garmin Striker Protective Cover 010-12441-00 - GRSTRIKERPC.
Check Stock

Auto Meter 6970 Cobalt Digital Boost Gauge,2.3125 in.

  • Features Auto Meter's E-Z View Digital LED Display System which maximizes readability and minimizes distracting high speed digit changes.
  • Includes data acquisition grade solid-state pressure transducer, providing unmatched accuracy and durability even in the harshest environments.
  • Auto Meter’s race proven digital stepper motor electric instruments provide unmatched accuracy which is further increased by utilizing a self calibration sequence during power up.
  • Gauge kit includes 1/8” NPT stainless steel pressure transducer, wiring harness, mounting hardware, and detailed instructions for installation.
  • 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system.
Check Stock

MartinLogan ElectroMotion ESL Electrostatic Floorstanding Loudspeaker - Each (Gloss Black)

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • 129 square inches of sound radiating surface on both the front and back.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-300 watts per channel.
  • Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock