Best Servo Amplifier Board
9 Pieces JST Y Connector 3 Pin JST Plug Splitters Servo Extension JST Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car or Airplanes (Mixed Style)
- Package includes: you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR (Futaba) cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness.
- Abundant quantity and diverse styles that can meet your various needs.
- Appropriate sizes: the servo extension cord measures approx. 15 cm/ 5.9 inches in length, universal size for your use, the color is white, black and red.
- Extensive usages: these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
- Well made: JST connector is made of quality PVC material, with good insulation and flame retardant.
- The interior is made of tinned copper, which has a good transmission and low resistance.
- Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control unit, which is male to female.
Check Stock10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord
- 3-Pin JR plug male to male connector servo extension lead wire cable..
- There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
- Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
- Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..
Check StockBluetooth Amplifier Board 25W+25W HF63 Dual Channel Audio Amplifier DC 10-25V Digital Amplifier Module with TDA7492P Chip
- High Quality : The amplifier board adopts TDA7492P power amplifier chip, high quality electronic components and military grade PCB board, durable in use..
- 2 Channel : This board is designed with dual channel output, 25W left channel and 25W right channel, high transmission rate and good sound quality..
- Bluetooth Connection : The amplifier board is designed with Bluetooth V2.1 module and power supply reverse connection protection, convenient and safe to use..
- Application : This digital amplifier board is suitable for upgrading and refitting the idle sound box and DIY production. It is suitable for speaker of 4Ω, 6Ω, 8Ω, 16Ω (8Ω is the best)..
Check Stock
15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles
- You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
- Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
- Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
- Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
- Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock
MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano
- Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
- Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
- 2.You should connect higher power supply for higher-power servo.
- 3.Make sure servo are connected properly, otherwise they will not move..
- Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
- Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
- Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
- Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock
XY-S100H 2.1 Channel Bluetooth Power Amplifier Board with APP Control, TPA3116 Chip 50W×2+100W, 12V-24V Audio Power Amplifier Module, Support Setting Bluetooth Name and Password
- 【What chip does this power amplifier board use? ] This power amplifier board adopts two TPA3116D2 chips, wide voltage input DC: 12-24V, and the output power amplifier peak value can reach 50W*2+100W (PMPO)..
- 【How many input modes？】 This power amplifier board has three input modes, USB mode (USB flash memory mode and USB sound card mode), Bluetooth mode, and AUX mode. The priority of the input mode is the hardware priority principle. You can also switch its audio input source at any time through the APP..
- 【Treble and Bass Controls！】 If you are tired of the inherent treble and bass, why not try the treble and bass control knobs! No matter what, you can always create the sound you like..
- 【Additional Features！】In order to explore the maximum potential of this power amplifier board, we have developed an APP for this power amplifier board. You can adjust the sound effect of the power amplifier board through the APP, set the Bluetooth name and password of the power amplifier board, and even set whether a prompt sound is required, etc..
- 【7 * 24 Hours After-sales Service！】Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems,....
Check StockDC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 50W+50W+100W (Bluetooth Amp),Bluetooth Amp
- tpa3116 amplifier 100W Subwoofer Amplifier Board.
- Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz.
- tpa3116 2x50w amplifier board Operating voltage range: DC 12-24V(maximum voltage is no more than 24V).
- This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board..
- bluetooth amplifer board DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output.
- Speaker impedance: bass speaker impedance: 2-8 ohm.
- You can use a good switching power supply adapter, laptop switching power supply, Here is our 24V power diy amplifier.
Check StockALMOCN 8PCS SG90 9G Micro Servo Motor Kit Mini for RC Robot Arm Helicopter Airplane Car Boat Controls Project
- Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino project..
- Stall Torque (4.8V): 17.5oz /in (1kg/cm).
- Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum....
- Amplifier Type: Analog controller. Operating Voltage: 4.8V～6.0V.
- NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW....
Check StockDIYmall 10pcs 10cm 3.93inch Male to Male JR Plug Servo Extension Lead Wire Cable 3Pin 100mm for RC Plane
- 10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
- Great for jumping from board to board or just about anything else..
- There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
- Length:100mm Type:JR Plug Servo Extension wire (Male to Male).
Check StockXH-A126 High-Power Bluetooth Amplifier Board 300W,5.0 Digital Power Amplifier Board,Dual Channel Mini ABS Amplifier Moudle Support Bluetooth Audio Reception DV12V-24V
- 【PRODUCT DETAILS】 XH-A126 high-power buetooth amplifier is a Bluetooth 5.0 power amplifier board, TDA7498E digital chip, dual-channel, stable....
- 【SUPPORT BLUETOOTH AUDIO RECEPTION】 Our bluetooth amplifier board has lossless high-definition sound quality, supports Bluetooth audio reception,....
- 【LARGE HEAT DISSIPATION AREA】 5.0 digital amplifier module has large heat dissipation area, good heat dissipation effect, effectively prolongs the....
- 【320W HIGH POWER OUTPUT】 The 300W mini amplifier power board has a large output power of 320W, making the low stress more dynamic..
- 【ABS MATERIAL】 ABS amplifier moudle is made of ABS material, which is durable and strictly abides by manufacturing standards to ensure excellent....
Check Stock6Pcs ShareGoo JR Style Servo Splitter Cable, 2.75' Servo 1 Male to 2 Female JR Y Harness Y Cable Extension Wire for RC Models Car Airplane Helicopter Drone Boat
- Used for RC cars trucks airplanes helicopters rc boat servo connection, receiver connection and flight control board..
- This servo Y-cable allows you to control two servos with one radio channel..
- Material: 22AWG silicone wire.Wire Length: 7CM/2.75".
- 3Pin wire cable.Male JR plug to 2 Female JR plug Y Harness cable..
- Pack of 6 JR style servo splitter cable,unique design, professional quality JR style connectors..
Check Stock
Diitao 50W×2+100W Bluetooth Power Amplifier Board with Subwoofer 2.1 Channel, 12V-24V Audio Power Amplifier Module with Treble and Bass Control for DIY Bluetooth Audio ZK-MT21, Black
- 【ZK-MT21 Power Amplifier Board】Uses Bluetooth 5.0, and its transmission distance can reach 49 feet (without obstruction). At the same time, this power amplifier board has a 3.5mm AUX audio input interface..
- 【Specification】With 36*25*10mm heat sink, suitable for power supply DC12-24V/5A or above (24V battery pack cannot be connected), suitable for speakers 20~100W, 4~8Ω..
- 【Protection Function】ZK-MT21 Bluetooth power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short-circuit protection, over-current, over-heat, and anti-reverse protection..
- 【Come With DC Conversion Plug】The DC adapters on the market (plug specification 5.5mm*2.1mm) basically can meet the needs of the ZK-MT21 Bluetooth power amplifier board. If your existing DC power plug is not 5.5mm*2.1mm, there is no The problem is because we have included a DC conversion plug in the product..
- 【Tips】There will be enough output power only when the audio input is sufficient and the power supply voltage/current is sufficient.The higher the power supply voltage, the greate....
Check Stock
TDA7498E Bluetooth Power Amplifier Board with Subwoofer 2.1 Channel 160W×2+220W, 15V-36V Audio Power Amplifier Module with Treble and Bass Control,Black
- 【TDA7498E HIFI CHIP】The TDA7498E Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, Wide Voltage Input DC: 15-36V,This power amplifier board uses two TDA7498E high-fidelity maximum output power up to 160W*2+220W..
- 【TREBLE & BASS CONTROL】If you are tired of an amplifier with only one volume knob, then you feel right, because you have further requirements for audio. By adjusting the high and low frequency knobs of the ZK-HT21 power amplifier board, you can make the sound more layered and make the bass more shocking..
- 【HIGH COMPATIBILITY】The DC adapters on the market (plug specification 5.5mm*2.1mm) basically can meet the needs of the ZK-HT21 Bluetooth power amplifier board. If your existing DC power plug is not 5.5mm*2.1mm, there is no The problem is because we have included a DC conversion plug in the product..
- 【PROTECTION FUNCTION】ZK-HT21 Bluetooth power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short-circuit protection, over-current, over-heat, and anti-reverse protection. When an overload occurs, the device reports t....
Check Stock
