Categories

Best Servo Breakout Board

Treedix Prototype Breakout Breadboard Adapter Expansion Board for BBC Micro:bit

  • This is a connector that fits directly to the edge contacts of a BBC micro:bit. The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this connector's pins. Also, the back half of the pins are not used at all..
  • The edge connector gives access to all the important pins on the bottom edge of the micro:bit. Check the datasheet for the pin spacing and orientation. This connector is best used with a custom PCB..
  • This breakout board for edge connectors allows intermediate and advanced users to connect micro:bit to breadboards and other sensors, motors, LEDs, etc..
  • We can use it in many ways, it is highly recommended to use our breakout board.
  • Through the breakout board, we broke through all 21 GPIO, power and ground pins in the form of 0.1"..
Check Stock

DORHEA 5Pcs ESP32 Development Board GPIO Breakout Board 30Pin Type-C Micro USB Dual Interface ESP32 Shield 30P Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 ESP-32 ESP-32S Expansion Board

  • ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V.
  • The GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor..
  • The breakout board is only fit for 30PIN ESP32. Please confirm your esp32 board pins width is coincide with the pin width of the breakout board.
  • ESP32 breakout board GPIO 1 into 2 only can compatible with 30 pins ESP32S ESP32 , just for ref asin: B086MJGFVV B086MLNH7N B086MGH7JV.
  • This module is safe, reliable, and scalable to a variety of applications. Stable and highly reliable.Great contact and stable signal transmission for your esp32 board.
Check Stock

Opto 22 G4PB8 G4 8 Channel I/O Module Rack

  • Screw Terminal Block Breakout Board for Arduino MKR..
  • With the breakout board, you can easily extend Arduino MKR projects to industrial control applications..
  • PCB mount Terminal Block: pitch 5.0mm/0.197.
Check Stock

Electronics-Salon DIN Rail Mount Screw Terminal Block Adapter Module, for Arduino UNO R3.

  • DIN Rail Mount Screw Terminal Block Breakout Board for Arduino MKR. With the breakout board, you can easily extend Arduino MKR projects to industrial control applications..
  • PCB mount Terminal Block: pitch 5.0mm/0.197.
Check Stock

15 Pieces Servo Extension Cables Servo Extension Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car Airplanes (3.9 Inch,5.9 Inch,11.8 Inch,19.7 Inch,23.6 Inch)

  • Wide application: these servo extension s are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
  • Appropriate sizes: the servo extension cord measures approx. 3.9 Inch, 5.9 Inch, 11.8 Inch, 19.7 Inch, 23.6 Inch in length, different size for your use, the color is black and red.
  • Package includes: this package includes 15 pieces of male to female servo extension cables, enough quantity for you to use and replacement, providing more convenience for you.
  • Feature: this male to female servo extension cord featured with female connector on one side, and male connector on the other side, can be connected to the receiving set and steering engine.
  • Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control, which is male to female.
Check Stock

3-Pack ESP8266 Development Board, Aideepen ESP8266 Breakout Board GPIO 1 into 2 for ESP8266 ESP-12E NODEMCU V2

  • 【ESP8266 ESP-12E】This esp8266 breakout board can fully compatible with ESP8266 ESP-12E..
  • 【Expansion Board】This expansion board can expand one GPIO pin of ESP8266 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative..
  • 【Ease to Use】Needn't welding components.These boards fit your ESP8266 ESP-12E perfectly,can be inserted into the sockets with minor effort by hand..
  • 【Good quality】This ESP8266 Breakout Board is design with double-layer that One pin is wired on both sides. Great contact and stable signal transmission to your ESP8266 board..
  • 【Why choose us】Aideepen specializes in various electronic components,We have always cared about the customer experience and improve the product function details,please feel free to contact us..
Check Stock

S-Union Ethereum ETH ZEC Mining Power Supply 12V GPU/PSU Breakout Board + 12pcs 16AWG PCI-E 6Pin to 6+2Pin Cables 27.5Inch Length 70CM with 5 Nylon Cable Ties

  • 【Item】GPU Mining Power Supply Breakout Board and PCI-E 6Pin to 6+2Pin (Male to Male) cable.
  • 【Performance】Measured maximum can support to 1600W power supply, 12 groups of graphics card 6pin output.
  • 【Safety】The Breakout Board have Solid state capacitor filter, suitable for a variety of server power supply. The line is 16 AWG wire，Able to....
  • 【Compatibility】This item is Compatible with GPU Mining Power Supply -HP 1200W/750W PSU. Such as DPS-1200FB DPS-1200QB PS-2751-5Q HSTSN-PL12....
  • 【What You Get And Shipping】1x Power Supply Unit Breakout Board & 12x PCI-E 6Pin to 6+2Pin Cables & 5x Nylon Cable Ties. SHIPPED FROM THE U.S.....
Check Stock

GeeekPi Raspberry Pi Pico Breakout HAT Board, Raspberry Pi GPIO Expansion Board Breakout HAT Module for Raspberry Pi Pico, Support Raspberry Pi HAT Board with 40Pin Pin Header

  • Application: This breakout HAT board, which is specially customized for Raspberry Pi Pico..
  • Convenient: Solve the problem that the Raspberry Pi Pico silk screen is covered, and providing pin header pins, which is convenient for users to build their own DIY circuits..
  • Features: Support Raspberry Pi HAT board with 40Pin Pin Header.
  • For example: GeeekPi DockerPi series HAT board, 4-channel relay HAT board, SensorHub board, etc. It Provides a good bearing platform.
  • Package Includes: 1 x Breakout HAT Board For Raspberry Pi Pico.
Check Stock

10Pcs USB 2.0 Breakout Board, MELIFE USB to DIP Adapter 2.54mm Breakout Board 4 Pins Pinboard USB Type A Breakout Board

  • PREMIUM QUALITY MATERIAL ENSURES LONG TERM SERVICE--This USB Breakout Board is made of 100% brand new and high quality material ensures longer use.
  • USB TYPE A FEMALE BREAKOUT BOARD--Standard USB type A female socket.
  • 4 PINS USB A BREAKBOARD BOARD--With 4 pins including VBUS, D+, D- and GND.
  • IDEAL TOOL FOR USB POWER SUPPLY AND BREADBOARD DESIGN--Great for DIY USB power supply, breadboard design, etc.
Check Stock

USB Type-C Breakout Board Serial Basic Breakout Female Connector Type PCB Converter Board (5 PCS)

  • Easy to solder:The upgraded USB-C breakthrough board has powerful power,three times the power as much as previous USB. Easy to integrate the USB-C connector into your project without soldering every tiny SMD pad,Easy to solder to the through-board terminals.
  • Simple and sturdy construction:The USB-C breakthrough board can be reversible.That can easily solve the general frustrating problem of USB cables.The USB breakthrough board can adds resistance to the original foundation.
  • Convert efficiently:The USB Type-C Breakout Board contain VBUS, GND, CC1, CC2, D+ and D- pins,In total of 6 USB-C connector that can be connect 0.1" pitch connector.Worked perfectly, The board can provide up to 1.5A nominal power and up to 3A power.Depending on the upstream equipment.Can definitely be used to convert keyboards to USB-C Detachable.
  • Apply for:The USB Type-C board can be used to replace the charging port on the astro a50 headset.PCBs quality and the contacts soldered with ease.Used these to convert an old hardwired keyboard to removable usb-c. Worked perfectly.
  • Package content:5pcs High quality USB Type-C Breakout Boards+5pcs pin connector.
Check Stock

Treeidx 3pcs Expansion Board Breadboard Gold Plated Finish Proto Board PCB Compatible with Raspberry PI PICO

  • This breakout board is specially made for Raspberry Pi pico.
  • The gold-plated surface can prevent oxidation, high-quality gold-plated surface, easy to weld.
  • All holes have been electroplated to increase the strength..
  • The breakout board is equipped with Raspberry Pi pico, which is convenient for users to develop and integrate flexibly.
  • The package does not include the Raspberry Pi pico, you need to configure it yourself..
Check Stock

BotBrain Robotics Control Board

  • Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
  • Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
  • Holes on side on the side of the board bolt to Merkur parts.
Check Stock

5pcs LED Breakout Module Board WS2812 RGB 5050 RGB with WS2812S chip Used for 5050 RGB LED

  • 【Introduction】- The breakout board uses WS2812S chip, used for 5050 LED..
  • 【Support】- This WS2812 Breakout Board supports high brightness and RGB color..
  • 【Can Connect a Lot of Lights】- Built in chip, it can connect a lot of lights in series..
  • 【Operation】- After connection in series, each light can control color independently..
  • 【Power Supply】- No matter for how much lights, it only need one control cable and two power cables..
Check Stock