Best Servo Signal Generator Board

DIYmall HJ Digital RC Servo Tester ESC Consistency Tester Speed Controller for RC Helicopter Airplane Car Motor Throttle Display

• 1 X HJ Digital Servo Tester / ESC Consistency Tester.
• 4CH tester servo: It can control 4 servos at the same time.
• 50H analog servo signal cycle 20us frequency 50Hz,125H digital the steering gear a signal cycle 8us frequency 125Hz.
• 250H Digital Servo signal cycle 4us frequency 250Hz.

DC 0-10V 0/4-20mA Current Voltage Signal Generator, Built-in Battery Power Supply Interface Analog Simulator, Adjustable 4-Digit Display, for PLC, Panel Debugging, Device Testing

• 【2-in-1 Voltage & Current Generator】--- Voltage Output: -10V~+10V, precision is 0.01V, current output: 0-22mA, precision is 0.01mA, rotate the encoder knob to adjust output voltage and current, switchable and adjustable, can be calibrated. Encoder knob rotate one circle has 20 pulses..
• 【Multiple 4-Digit Display】--- With 4 different types of digit display, two decimal points, you can press "Mode" button to switch the display mode between voltage and current, you can also follow the instructions to switch 0-100 percent or 0-50HZ display..
• 【Different Power Supply Modes】--- With 1000mAh 3.7V built-in rechargeable battery embedded inside (charged via micro USB port), it can be powered via various ways, micro USB-5V, external power DC 15-30V, each can make the signal generator to work..
• 【Safe to Use】--- Output range: passive or active 0-22mA, -10~+10V, voltage output can be exactly 0.00V.
• output range and precision are programmable and adjustable. Output is with short circuit protection, power supply with reverse connection protection, which is safe for you to use. User can set 9 x fast signal output points, more convenient to do debugging..
• 【Wide Application】--- It can be used for PLC and panel debugging, device testing, frequency converte....

Traxxas 2071 Servo Case for 2070 Servo, 483-Pack

• 【CHANGE DIRECTION OF ROTATION】Servo Reverser can change the direction of rotation of the servo. Just install them in series in the servo channel..
• 【COMPACT SIZE】Compact size and light weight without putting extra burden on your drone and suitable for carrying anywhere. Perfect workmanship, easy to install and disassemble, the ideal upgrade accessory for your drone..
• 【OPERATING VOLTAGE】5.0-6.0V (directly connected to the receiver), Current: 2A, Length: approx 6 cm / 2.36 inch..
• 【STABLE PERFORMANCE】The RC servo signal reverser is made of PCB material, which is durable and solide to use for a long service life. High-precision PCB ensures stable performance and excellent functions, suitable for your RC done..
• 【WIDELY USED】The Rotation Inverters widely used in JR Futaba Aircraft, RC Aircraft Steering Gear. Package includes 1x Servo Signal Reverser with JR male and female type plug..

Miuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project

• Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments.
• Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V.
• Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm).
• NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally.
• How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation.

ICQUANZX Servo Tester 3CH Digital Multi Servo Tester RC Aluminum Shell Servo Tester ECS Consistency Speed Controler Checker for RC Helicopter Car Boat

• High Quality: Aluminum shell, durable and lightweight, easy to operate buttons.
• 3 modes to check servos or ESC, manual mode, neutral mode, automatic “window wiper” mode.
• It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency ,also can compare their reaction time respectively.
• Great for CCPM applications:Servo Tester can connect 3 servos of the CCPM helicopters, adjust the helicopters and select servos.
• It can use the electric speed controller (ESC) as a signal generator.

GT Power Servo Teste 3CH Digital Multi Servo Tester RC Aluminum Shell Servo Tester ECS Consistency Speed Controler Checker for RC Helicopter Car Boat

• High Quality: Aluminum shell, durable and lightweight, easy to operate buttons.
• 3 modes to check servos or ESC, manual mode, neutral mode, automatic “window wiper” mode.
• It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency ,also can compare their reaction time respectively.
• Great for CCPM applications:GT Power Servo Tester can connect 3 servos of the CCPM helicopters, adjust the helicopters and select servos.
• It can use the electric speed controller (ESC) as a signal generator.

X100D Multi-Function calibrator Output 4-20mA Current ; Voltage ;PT100;K E J T R B S N ;Product Does not with Batteries; Batteries Need to be Purchased Separately

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

• AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
• CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
• AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
• WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..

Dilwe RC Car Servo,Durable Plastic Gear Servo for WLtoys 12428 / 12427 1/12 RC Car Upgrade Spare Parts

• ✔20KG Large Torque - 20KG Servo Motor 20.5 kg.cm(4.8V) - 22.8 kg.cm(298.5 oz/in)(7.2V)..
• ✔270 Degree Rotation - Pulse width signal of 20kg servo motor from 500 to 2500 μsec, well controlled from 0 to 270 degrees. When the input signal is 500usec, the angle is 0 degrees, and at 2500 μsec, the angle is 270 degrees..
• ✔High Precision - DS3218 20kg digital servo accuracy with precision potentiometers. Excellent linearity, precision control, high quality leads and center nicely..
• ✔High Rotation Support Waterproof - Waterproof performance: IP66. Metal servo motor accuracy and linearity have been greatly improved! Perfect satisfy the needs of making robots. Also for cars, boats, vehicles and remote control toys and so on..
• ✔Dimensions - 40*20*40.5mm(1.58*0.79*1.60in).
• Weight - 56g±5%(2oz±5%). Operating voltage range: 4.8-7.2V.

keenso Servo Signal Reverser, RC Model Aircraft PCB 5.0-6.0V Operating Voltage Servo Signal Reverser

• Change direction of rotation : Servo Reverser can change the direction of rotation of the servo. Just install them in series in the servo channel..
• Stable performance : High-precision PCB ensures stable performance and excellent functions, suitable for your RC done..
• Durable to use : The RC servo signal reverser is made of PCB material, which is durable and solide to use for a long service life..
• Perfect workmanship : Perfect workmanship, easy to install and disassemble, the ideal upgrade accessory for your drone..
• Compact size : Compact size and light weight without putting extra burden on your drone and suitable for carrying anywhere..

15 Pieces Servo Extension Cables Servo Extension Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car Airplanes (3.9 Inch,5.9 Inch,11.8 Inch,19.7 Inch,23.6 Inch)

• Wide application: these servo extension s are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
• Appropriate sizes: the servo extension cord measures approx. 3.9 Inch, 5.9 Inch, 11.8 Inch, 19.7 Inch, 23.6 Inch in length, different size for your use, the color is black and red.
• Package includes: this package includes 15 pieces of male to female servo extension cables, enough quantity for you to use and replacement, providing more convenience for you.
• Feature: this male to female servo extension cord featured with female connector on one side, and male connector on the other side, can be connected to the receiving set and steering engine.
• Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control, which is male to female.

XCFDP 15MHz DDS Signal Generator Counter,High Precision Dual-Channel Function Generator Arbitrary Waveform Frequency Meter 2.4’’ Screen 200MSa/s 15MHz

• 【EASY TO OPERATE】Convenient operation interface, superior technical indicators and humanized graphic style. Its sine wave frequency output can....
• 【SIGNAL STABILITY】The signal generator adopts large-scale FPGA integrated circuit and high-speed MCU processor, and the internal circuit adopts....
• 【FREQUENCY METER FUNCTION】It supports scanning output from low frequency to high frequency or from high frequency to low frequency. The scanning....
• 【HIGH PRECISION】This signal generator adopts dual-channel DDS signal and TTL electric level output to generate accurate, stable, low-distortion....
• 【WIDE APPLICATION】The signal generator has excellent amplitude-frequency characteristics, small and beautiful appearance, and intuitive control....

Hosyond 10 Pack Servo Motors SG90 9G Micro Servo for RC Robot Helicopter Airplane Boat Remote Control Toys, Servo for Arduino Project, Blue

• [Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project.
• [Interface type] This SG90 servo is compatible with JR & Futaba interface.
• [Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees.
• [Reminder] The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally.