Best Servo To Can Converter Board

BotBrain Robotics Control Board

• Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
• Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
• Holes on side on the side of the board bolt to Merkur parts.

10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord

• 3-Pin JR plug male to male connector servo extension lead wire cable..
• There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
• Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
• Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..

ARCELI Boost Buck Converter,Communication Constant DC - DC Voltage Current Step-Down Power Supply Module Buck Voltage Converter Voltmeter 50V 5ADPS5005+USB+BT

• buck voltage converter input voltage range DC 6-55V, output voltage range 0-50V, output current range 0-5A, output power range 0-250W, output voltage resolution 0.01V, output current resolution: 0.001A..
• Wireless & Wire Connection: it can connect with computer by Bluetooth, in the distance range of 5 meters.
• or can connect by the USB communication board. User can remote monitor, voltage setting and current setting can be operated quickly..
• Quick Operation: it is easy to operate converter with this, you can do voltage setting and current setting as quickly as possible.
• you can also set it to cut off output when over voltage, over current and over power..
• LCD Display: Built with color LCD display, it will be convenient for you to review preset voltage, input voltage, output voltage, preset current, output current, output power and brightness of LCD..
• Package Including: 1x DC adjustable constant voltage power supply converter.

DIYmall 10pcs 10cm 3.93inch Male to Male JR Plug Servo Extension Lead Wire Cable 3Pin 100mm for RC Plane

• 10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
• Great for jumping from board to board or just about anything else..
• There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
• Length:100mm Type:JR Plug Servo Extension wire (Male to Male).

KEYESTUDIO 16-Channel 12-bit Servo Motor Driver Board I2C Interface for Arduino

• This expansion board can directly stack on the controller R3 board and can drive up to 16 servos.
• Uses I2C input, just occupy A4 and A5 interface on the control board.
• Contains PCB double sided holes, can direct to solder with components to build up prototyping circuits.
• Servo power supply independent V + input up to 6V.
• How to use: Search for "keyestudio wiki KS0258" in Google Chrome to get the wiki online tutorial for this product..

Sony CDP-CE335 5-CD Changer Discontinued by Manufacturer

6Pcs ShareGoo JR Style Servo Splitter Cable, 2.75' Servo 1 Male to 2 Female JR Y Harness Y Cable Extension Wire for RC Models Car Airplane Helicopter Drone Boat

• Used for RC cars trucks airplanes helicopters rc boat servo connection, receiver connection and flight control board..
• This servo Y-cable allows you to control two servos with one radio channel..
• Material: 22AWG silicone wire.Wire Length: 7CM/2.75".
• 3Pin wire cable.Male JR plug to 2 Female JR plug Y Harness cable..
• Pack of 6 JR style servo splitter cable,unique design, professional quality JR style connectors..

MKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise for CNC 3D Printer Prevent Losing Steps Compatible with Gen L SGen L SKR 2 / V1.4 Turbo BTT Octopus V1.1 Mainboard

• MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor's rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up..
• Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query..
• Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution..
• Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board.
• Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User metho....

Voltage Boost Converter, DROK DC 8-60V to 10-120V 15A Numerical Control Step Up Voltage Current Adjustable Regulator Constant Module Output 48V 24V 12V Power Supply with LED Display Heat Sink

• ... designed with bright 4-digit LED to display output voltage, current at default simple mode. By manual setting to fully functional mode, the stabilizer would show more parameters, such as power and capacity. Also the board is equipped with working indicators to show real-time working status..
• Data Save --- The boost converter can save up to 10 sets of parameter settings. It’s easy to save and very convenient to call out parameters at any time you would like to..
• Wide Application --- The step up power converter does great for wind power, DC generators, solar panels to charge battery, and it also can be made as a boost power supply to power devices..
• Notes --- 1) No big difference between input and output voltage. Otherwise the power loss will increase then the actual output may not be as what expected.
• 2) Actual output current is mainly decided by the load. Converter can only set a limit on output current.
• 3) When powering high-power appliances, please turn off the automatic output function, correctly connect the converter, and then press the "OK" button to output. After the voltage rises to the set voltage, turn on the appliances..

New Version AC to DC Converter, EAGWELL SMPS 110V AC to 12V DC Converter Power Supply Adjustable Switch Power Supply Transformer Max 50A 600W

• 【NEW VERSION AC TO DC CONVERTER】New Upgrade 600w converter build with Imported Aluminum alloy shell ,Built-in wire integrated design, Dual power connection methods, Very convenient for 12V devices with clamps, Eagwell's 50 amp power supply come with ul power cord ,12v converter with switch ,wire lugs,metal clip and screw.Super convenient for devices with clamps. You can clamp to the two cylindrical contacts directly. It is a patent design of 12v dc power converter..
• 【ADJUSTABLE VOLTAGE】12 Volt Power Supply is AC to DC 12V Converter.Input voltage Support AC 110V-120V / 220V-240V , Output Range (12V 1A-5A, 12W-60W ) or (12V 10A-50A 120W-600W) ,voltage input will adjust automatically to SMPS Model ,Output current Mainly depends on your device, such as 10A 120W, 25A 300W, 40A 480W, Max current up to 50A,Power 600W..
• 【HOW TO CHOOSE】The peak power is 50A,600W. It does not mean 12v power supply can fit rate power 600W. For motor device, the start current will be much higher that rate power. If use resistive equipment , such like led strips, you can use higher power, such like 40A rated leds will also be OK..

MACH3 Controller USB MACH3 100Khz Motion Controller Card Breakout Board Controller Card for CNC Engraving Servo Motor Stepper Motor Servo motor

• 【Functions】The function of this motion control card includes that it supports automatic probe tool, emergency input, limit switch, and supports....
• 【4-axis Linkage】Usb interface board supports for 4-axis linkage, you can connect four stepper motor drives or servo drives. 4 general-purpose....
• 【Wide Use】The maximum step-pulse frequency of motion control card is100KHz, which is very suitable for CNC Engraving, Servo Motor, Stepper Motor....
• 【Advantage】The motion controller needs using external 24V DC power to isolate USB and external port, and to make the system more stable. And it....
• 【Drive Output Interface】The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts,....

Thunder Tiger RC Rudder Servo Gear Set Innovator

• ☆【QUALITY METAL GEAR】：Using high-quality hard alloy materials, equipped with metal gears, the RC gear servo kit has high precision and is not easy to jam.
• ☆【HIGH-STRENGTH ALUMINUM FRAME】：Using high-quality all-aluminum frame, and after precision processing, the RC gear servo kit is strong and not easily deformed.
• ☆【HIGH OPERATING EFFECIENCY】：The RC gear servo kit has high operating efficiency, low noise, low power consumption, and is easy to install and disassemble.
• ☆【WITHSTAND HIGHER LOADS】：RC gear servo can withstand higher loads and ensure the normal operation of the server, effectively improving the performance of RC cars.
• ☆【5 SIZE SERVO ARMS】：There are 5 different servo arms in the RC gear servo kit package, which can meet your different needs, suitable for 1/10 1/12 remote control car RC off-road vehicle.

Powermax WFCO WF8955PECB Black 55A Replacement Power Center PPC 55A

• Converts 105 To 130 Volt AC To 13.2 To 14.4 Volt DC.
• Replaces The Lower Power Converter Section On Converter.